The VS122HDMIU High Speed HDMI® Auto Switcher lets you share a display between 2 consumer electronic devices or computers and prioritize your HDMI signals. The HDMI switch features a primary and secondary HDMI input port, and automatically defaults to the signal from the primary input port. If the signal connected to the primary input port is lost, the device automatically switches to display the signal from the secondary HDMI input port.
Designed for maximum control and versatility, the high-speed HDMI auto switch box also offers manual control of connected signals with easy-to-use front panel buttons that allow you to toggle between video sources.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
The StarTech.com Advantage
Automatically switch between High Speed HDMI® devices with VS122HDMIU's auto-sensing technology
Share one display/monitor between two consumer electronics devices or computers saving the cost of purchasing additional displays
Automatically selects the priority of incoming video signals for display
Choice of automatic or manual switching
Supports HDTV resolutions up to 1080p
Supports PC resolutions up to 1600x1200
Easy installation and set up in minutes
Cables up to 30ft / 10m in length can be used for input / output
High Speed HDMI® Compliant
Ideal for switching between consumer electronics devices such as Blu-ray players, satellite receivers, video game consoles and other devices
Switch between computers with HDMI® output
ASI Distribution USA
D and H
Ingram Micro USA
Product appearance and specifications are subject to change without notice.
High Speed HDMI®, HDCP
2 - HDMI (19 pin) Female
1 - HDMI (19 pin) Female
10 m / 33 ft
Wide Screen Supported
2.5 in [63 mm]
2.3 in [59 mm]
0.6 in [15 mm]
1.2 oz [35 g]
3 - Two Green for Display Status, and one red for power.
0°C to 70°C (32°F to 158°F)
-65°C to 150°C (-85°F to 302°F)
10% to 85%RH
Special Notes / Requirements
Port 1 is set to have higher priority than port 2 when both signals are on