IDE to Slim Optical IDE Drive Adapter
Product ID: OPT2IDE
Convert a slimline IDE optical drive connector to a desktop computer's 40-pin IDE connector
Two screws are included for mounting to the rear of the slim drive.
Jumpers for setting master or slave on the IDE channel
Enables an ATAPI device to work on a EIDE/IDE interface
The StarTech.com Advantage
- Use an old Laptop slim optical drive in a desktop PC with IDE
View full OS compatibility
- Connecting Slimline IDE based CD & DVD drives to IDE controllers
|Product Height||26 mm [1 in]|
|Product Length||170 mm [6.7 in]|
|Product Weight||14 g [0.5 oz]|
|Product Width||138 mm [5.4 in]|
|Connector A||1 - IDE (40 Pin; EIDE/PATA) Male|
|1 - MPC2 (4 pin; Audio) Male|
|1 - SP4 (4 pin; Small Drive Power) Male|
|Connector B||2 - Slim ATAPI (50 pin; JAE) Male|
|Operating Temperature||0°C to 50°C (32°F to 122°F)|
|Storage Temperature||-10°C to 60°C (14°F to 140°F)|
|Shipping (Package) Weight||0.1 kg [0.2 lb]|
|What's in the Box|
|Included in Package||1 - Slim optical to IDE adapter|
|1 - Mounting Screws|
Use new Slimline drives with older motherboards
Connect a Slimline SATA optical drive to a standard SATA motherboard connection.
Connect two hard drives to a computer IDE controller
Connect two ATA 100/133 drives to a computer IDE controller
Power a SATA drive and a floppy drive from a single LP4 Molex connection.
* Product appearance and specifications are subject to change without notice.