StarTech.com

1-poort PCI Express PCIe gigabit netwerkserver NIC-kaart - dubbelprofiel

Voeg een 10/100/1000 Mbit/s Ethernet-poort toe aan een pc via een PCI Express-slot

Productcode: ST1000SPEX2

  • Een enkele RJ45 Ethernet-poort met 10/100/1000 Mbit/s
  • Gigabit detectie- en Link/Activity-LED-indicators
  • Voldoet aan alle eisen van IEEE 802.3, IEEE 802.3u, IEEE 802.3x en IEEE 802.3ab
Bekijk meer
  • Ondersteunt IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding en IEEE 802.3x full-duplex Flow Control
  • Ondersteuing voor Jumbo Frames
  • Full en half duplex-ondersteuning
  • Ondersteuning voor Wake-on-LAN
  • Crossover Detection en Auto-Correction (Auto MDI/MDI-X)
  • Inclusief low profile / half-height montagebracket
€ 36,99 EUR exc BTW
€ 44,76 EUR inc BTW

Overzicht

De ST1000SPEX2 PCIe Gigabit Ethernet-netwerkkaart voegt een 10/100/1000 Mbps compatibele RJ45 Ethernetpoort toe aan een PCI Express-voorbereide client, server of werkstation, en biedt zo een handige aanvullende of vervangende netwerkinterface.

Deze veelzijdige Gigabit NIC/serveradapter, die voldoet aan IEEE 802.3/u/ab-standaards en 9K Jumbo Frames, VLAN tagging en Wake on LAN (WOL) ondersteunt, levert zeer betrouwbare prestaties.

Bovendien worden bij de kaart zowel full-profile als low-profile/halfhoge installatiesteunen meegeleverd, geschikt voor vele verschillende computer-/serverchassis, ongeacht de formfactor.

De ST1000SPEX2-netwerkkaart wordt gedekt door een StarTech.com tweejarige garantie en gratis levenslange technische ondersteuning.

StarTech.com Voordeel

  • Past in full-profile of low-profile/kleine-formfactor (SFF)-systemen, bij gebruik van een halfhoge steun
  • Biedt gebruiksflexibiliteit en eenvoudige installatie door ondersteuning van geavanceerde functies zoals Jumbo Frames, Wake-On-LAN en Auto MDIX

Toepassingen

Upgrade 10/100 Ethernet-capaciteit naar gigabit-capaciteit

Voeg een Ethernetpoort toe aan een werkstation of servercomputer, voor redundantie of overbrugging

Voeg netwerkfunctionaliteit toe aan een ouder systeem zonder Ethernet-poort

Technische specificaties

Garantie
Garantie 2 Years
Hardware
Bus type PCI Express
Chipsetcode Realtek - RTL8111E
Industriestandaarden IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab
Interface RJ45 (gigabit Ethernet)
Kaarttype Standaard bracket (incl. low profile bracket)
Poorten 1
Prestaties
Auto MDIX Ja
Compatibele netwerken 10/100/1000 Mbps
Full duplex ondersteuning Ja
Jumbo Frame Support 9K max.
Maximale overdrachtsnelheid 1000 Mbit/s
MTBF 376,212 Hours
Ondersteunde protocollen CSMA/CD
Promiscuous Mode Ja
Connector(en)
Externe poorten 1 - RJ-45 Vrouwelijk
Type connector(en) 1 - PCI Express x1 Mannelijk
Software
Besturingssystemen Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Mac OS X® 10.6 to 10.9
Linux 2.4.x to 4.11.x LTS Versions Only
Speciale opmerkingen / vereisten
Systeem- en kabelvereisten Beschikbare PCI Express-uitbreidingskaartsleuf
Indicatoren
LED-indicatoren 1 - Gigabit Detect (geel)
1 - Verbinding/activiteit (groen)
Gebruiksomgeving
Bedrijfstemperatuur 0°C to 70°C (32°F to 158°F)
Opslagtemperatuur 0°C to 100°C (32°F to 212°F)
Vochtigheid 10% - 90% rel. luchtvochtigheid
Fysieke eigenschappen
Breedte product 120.3 mm [4.7 in]
Gewicht product 40 g [1.4 oz]
Hoogte product 18 mm [0.7 in]
Lengte product 67.9 mm [2.7 in]
Verpakkingsinformatie
Verzendgewicht (verpakt) 120 g [4.2 oz]
Wat wordt er meegeleverd
Meegeleverd 1 - Gigabit Ethernet PCI Express Kaart
1 - Low-profile bracket
1 - Driver-CD
1 - Handleiding

Compatibiliteit

Bekijk volledige OS compatibiliteit
Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Mac OS X® 10.6 to 10.9
Linux 2.4.x to 4.11.x LTS Versions Only

Certificaties

Verwante producten

1-poort PCI Express 10/100 Ethernet Netwerkkaart Adapter
PEX100S
1-poort PCI Express 10/100 Ethernet Netwerkkaart Adapter

Voeg een 10/100 Mbit/s Ethernetpoort toe aan een desktopcomputer via een PCI Express-slot

€ 22,99 exc BTW
€ 27,82 inc BTW
1-poort PCI 10/100/1000 32-bit Gigabit Ethernet Netwerk-adapterkaart
ST1000BT32
1-poort PCI 10/100/1000 32-bit Gigabit Ethernet Netwerk-adapterkaart

Voeg een 10/100/1000 Mbit/s Ethernet-poort toe aan een pc via een PCI-slot

€ 15,99 exc BTW
€ 19,35 inc BTW
1-poort PCI Express PCIe gigabit NIC-serveradapter-netwerkkaart - low-profile
ST1000SPEX2L
1-poort PCI Express PCIe gigabit NIC-serveradapter-netwerkkaart - low-profile

Voeg een 10/100/1000 Mbit/s Ethernet-poort toe aan een pc via een PCI Express-slot

€ 36,99 exc BTW
€ 44,76 inc BTW

Accessoires

Productondersteuning

Drivers en downloads

Drivers:
Handleiding:
Specificatieblad(en)

Veelgestelde vragen (FAQ)

Installatie

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Right-click Setup.exe. 
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Your computer will automatically complete the driver installation and your device should be ready to use.

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Double-click Setup.exe.
  4. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  5. Your computer will automatically complete the driver installation and your device should be ready to use.

Hoe gaat u te werk

StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met:

  1. The BIOS must support PXE.
  2. The BIOS must see the card.
  3. The environment must have drivers for the chipset used in the card.
  4. If using a USB networking card, the environment must have support for USB devices as well.

Virtual local area network (VLAN) tagging requires that the network interface card (NIC) and the router or switch that you use support protocol IEEE 802.1q.

Depending on the NIC, you can set your VLAN ID in Device Manager.  Not all NICs that support VLAN tagging have this option.

Setting your VLAN ID in Device Manager

Note: Log in as the local administrator before continuing.

To open Device Manager:

  • Press Windows key + R
  • Type devmgmt.msc
  • Click OK.
  1. In Device Manager, open Network adapters.
  2. Right-click on the NIC and choose Properties.
  3. Click the Advanced tab.
  4. Scroll down to VLAN ID.
  5. Set the ID that you would like the NIC to have and click OK.

Setting up your VLAN Tagging and Setting a VLAN ID

How you perform this task depends on your router or switch.  Consult the manual or manufacturer of your router or switch for more details.

In your router or switch, you can VLAN tag a device by the VLAN ID if you set one previously, or by the MAC address of the computer.  Your router or switch will list all IP devices by MAC address.

The drivers on our website include a Realtek Diagnostic Toolkit that you can use to easily set up a VLAN tag.

Make sure that you are logged in as the local administrator before continuing.

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Downloads). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the Realtek_PCI_GbE.zip file or the Realtek_PCIe_GbE.zip file.
  2. Select Extract All and note the location that the files will be extracted to.
  3. Select Extract. The extracted files will open automatically.
  4. In the list of extracted files, do one of the following:
  • If you are running Windows Vista/7/8, right-click the Setup.exe file and select Run as Administrator.
  • If you are running Windows XP, double-click the Setup.exe file.
  1. Follow the on-screen instructions to install the software.
  2. Open the software and under the VLAN settings, you can add, delete, or modify the VID (VLAN ID).

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your expansion card, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your expansion card is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Troubleshooting

When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Ethernet cables
  • Network devices
  • Computer system

To test your setup components, try the following:

  • Use the Ethernet cables, network devices, and computer system in another setup to see if the problem is with the components or the setup.
  • Use different Ethernet cables, network devices, and a different computer system in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.
  • Use short cables when you are testing.

When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:

Sometimes an on-board network interface card (NIC) conflicts with a new NIC.  In these cases it is best to disable the on-board NIC.

The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible.  To do this, consult your motherboard manual.

You can also disable any NIC in Windows.  Here is how you do this:

First click Start, or, in Windows 10 and 8, hold down the Windows key and press X.  Then click Control Panel.

Windows 10

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows 8

  1. Click Network and Sharing Center.
  2. On the left, click Change adapter settings.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows 7

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows Vista

  1. Click Network and Sharing Center.
  2. On the left, click Manage network connections.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows XP

  1. Click Network Connections.
  2. Right-click the NIC that you would like to disable and select Disable.

If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings.  You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.

Note: You must log in as the local administrator before you continue.

To open Device Manager:

  • Press Windows key + R.
  • Type devmgmt.msc.
  • Click OK.
  1. Open the Networking adapters section.
  2. Right-click the network adapter that you want to change and select Properties.
  3. Click the Advanced tab.
  4. Scroll down to Speed & Duplex. By default, it is set to Auto-Negotiate. Select any of the speeds that you see in the list.
  5. Click OK and restart your computer.