StarTech.com

2-poort PCI Express eSATA Controller/Adapter-kaart

Voeg 2 eSATA-poorten toe aan uw desktopcomputer via een PCI Express uitbreidingsslot

Productcode: PEXESATA2

  • 2 externe eSATA-poorten
  • Ondersteuning voor FIS en command-based port-multiplier technologie
  • Ondersteuning voor opslagmedia met hoge capaciteit door 48-bits Logical Block Addressing (LBA)
Bekijk meer
  • Hot-swapping van opslagmedia
  • Ondersteuning voor Native Command Queuing (NCQ)
  • Volledig compatibel met de Serial ATA 2.5 specificaties met overdrachtsnelheden tot 3 Gbit/s
  • Maakt gebruik van een enkele native PCI Express-chipset
  • Inclusief low profile / half-height montagebracket
€ 25,99 EUR exc BTW
€ 31,45 EUR inc BTW
Niet beschikbaar
Eventueel op voorraad bij partners
Waar te verkrijgen
Van een partner

Bezoek vandaag nog onze Europese online winkel voor meer producten zoals deze!

Overzicht

Deze 2-poort PCI Express eSATA Controller/Adapter-kaart biedt eenvoudige connectiviteit tussen een centrale computer en eSATA-apparaten. De adapterkaart bevat twee eSATA-poorten en biedt een kosteneffectieve oplossing voor het aansluiten van hot-swappable opslagmedia met hoge snelheid, wat het maken van data back-ups en archivering vergemakkelijkt.

De adapterkaart met een gegevensoverdrachtsnelheid tot 3 Gbit/s biedt volledige ondersteuning voor SATA-300 (SATA II) harde schijven en beschikt over een native PCI Express-chipset, die zorgt voor een verbeterde compatibiliteit, betrouwbaarheid en prestatie van externe SATA-opslagmedia.

De PCI Express eSATA-controllerkaart beschikt over meerdere poorten met commandogestuurd schakelen voor de aansluiting van meerdere externe harde schijven op een Windows®-hostsysteem via één externe SATA-verbinding.

De eSATA-controllerkaart met tweevoudig profiel wordt geleverd met een low profile / half-height bracket voor aanpassing aan systemen met kleine vormfactor.

StarTech.com Voordeel

  • Port-multiplier technologie ondersteunt meervoudige externe schijfstations via een enkele eSATA-kabel bij snelheden tot 3 Gbit/s
  • Ondersteunt harde schijven groter dan 136GB met 48-bits LBA en gebruikt een enkele native PCI Express-chipset in plaats van een bridge chip om een snelle en betrouwbare werking zeker te stellen
  • Met levenslange garantie en gratis technische ondersteuning door StarTech.com

Toepassingen

Voeg eSATA-functionaliteit toe aan een werkstation of server voor externe opslag met hoge snelheid

Voeg eSATA-poorten met port-multiplier functionaliteit toe voor uitgebreide externe opslagcapaciteit

Upgrade van tragere externe verbindingsmethoden naar native SATA-connectiviteit

Technische specificaties

Garantie
Garantie Lifetime
Hardware
Bus type PCI Express
Chipsetcode Silicon Image - SiI3132
Interface eSATA
Kaarttype Standaard bracket (incl. low profile bracket)
Poorten 2
Prestaties
Maximale overdrachtsnelheid 300 MB/s (3 Gigabit/s)
MTBF 3.141.188 uur
Number of Drives Supported Through Port Multiplier 1 to 5
Number of Ports That Support Port Multiplier 2 (can use 2 PM at a time)
Ondersteunde protocollen FIS Based Switching for an additional 1-5 ports
Native Command Queuing (NCQ)
Legacy Command Queuing (LCQ)
Port-multiplier Ja
RAID Nee
Type en snelheid SATA II (3 Gbps)
Connector(en)
Externe poorten 2 - eSATA (7-polig, data) Stekker
Type connector(en) 1 - PCI Express x1 Mannelijk
Software
Besturingssystemen Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012
Mac OS X® 10.6 to 10.11
Linux 3.5.x to 4.4.x LTS Versions only
Speciale opmerkingen / vereisten
Notitie PCI Express 1.1 en is compatibel met een PCI Express 2.0 sleuf
Port Multiplier niet ondersteund in Mac OS®
Gebruiksomgeving
Bedrijfstemperatuur 5°C to 50°C (41°F to 122°F)
Opslagtemperatuur -25°C to 70°C (-13°F to 158°F)
Vochtigheid 20% - 80% rel. luchtvochtigheid
Fysieke eigenschappen
Breedte product 90 mm [3.5 in]
Gewicht product 67.9 g [2.4 oz]
Hoogte product 20 mm [0.8 in]
Lengte product 120 mm [4.7 in]
Verpakkingsinformatie
Verzendgewicht (verpakt) 0.2 kg [0.4 lb]
Wat wordt er meegeleverd
Meegeleverd 1 - eSATA PCI Express Kaart
1 - Low-profile bracket
1 - Installatie-CD
1 - Handleiding

Compatibiliteit

Bekijk volledige OS compatibiliteit
Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012
Mac OS X® 10.6 to 10.11
Linux 3.5.x to 4.4.x LTS Versions only

Certificaties

Accessoires

Productondersteuning

Drivers en downloads

Drivers:
Handleiding:
Specificatieblad(en)

Veelgestelde vragen (FAQ)

Voor uw aanschaf

Although you can adapt a Serial Attached SCSI (SAS) drive to connect to a standard SATA controller card, the card must support SAS commands in order to communicate with SAS drives. SAS drives have a different command set that is not present on SATA controllers.

This SATA controller card only supports standard SATA drives.

This device does not support the ATA Packet Interface (ATAPI) protocol. ATAPI is required for optical drives, including CD-ROM drives, DVD-ROM drives, and Blu-ray players. Because this device does not support ATAPI, optical drives are also not supported over any IDE, SATA, or eSATA connections.

For a list of products that do support ATAPI, refer to the following FAQ: https://www.startech.com/faq/hard_drive_controllers_atapi_support.

Installatie

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.
  3. Right-click SCSI and RAID Controllers, which will have a “!” or “?” next to it to indicate a driver issue.
  4. Click Update Driver.
  5. Click Browse my computer for driver software.
  6. Select the Let me pick from a list of device drivers on my computer option.
  7. On the Select your device’s type from the list below screen, click Show All Devices, and click Next.

Note: The Select your device’s type from the list below screen does not appear on all systems. If you do not see this screen, skip this step.

  1. Select the Have Disk option.
  2. Browse to the extracted folder from Step 2.
  3. Open the Windows folder.
  4. Open the Manual Drivers folder.
  5. Open the folders as appropriate for your system type and hardware.

Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  1. Click the SI3132.inf file. Click OK, and then click Next. Additional device listings will appear in Device Manager.
  2. Complete steps 4 to 11 for each of the new device listings.

Hoe gaat u te werk

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your expansion card, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your expansion card is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

In order to use a hard drive plugged into a hard drive controller card as your operating system, you need to install the operating system onto the hard drive while it is plugged into the expansion card. To do this, complete the following:

Note: Not all hard drive controller cards have drivers that allow you to install the operating system onto the hard drive. All of the hard drive controllers that display this FAQ include this capability.

Before you begin, consult the documentation that came with the motherboard to make sure that the motherboard or BIOS supports booting from an expansion card.

  1. Back up any data on the hard drive.
  2. Make a copy of the drivers from the website onto a floppy disc, CD, DVD, or USB flash drive. The drivers that you download depends on the operating system that you want to install.
  3. Install the hard drive controller card onto your motherboard.
  4. Plug the hard drive into the controller card.
  5. Turn on your computer and open the operating system install wizard.
  6. Before you select the hard drive that you want to install the operating system onto, select the option to install third-party drivers.
  7. Point the driver installer to the floppy disc, CD, DVD, or USB flash drive.
  8. Install the drivers.
  9. Select the hard drive on the hard drive controller card as the location where you want to install the operating system.
  10. Complete the on-screen instructions to finish installing the operating system.

Troubleshooting

When you troubleshoot issues with a hard drive controller card, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • IDE, SATA, and eSATA cables

  • Hard drives

  • Hard drive controller card

To test your setup components, try the following:

  • Use the IDE, SATA, or eSATA cable, hard drive, and hard drive controller card in another setup to see if the problem is with the components or the setup.

  • Use a different IDE, SATA, or eSATA cable, hard drive, and hard drive controller card in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the hard drive and hard drive controller card, it is recommended that you do the following:

  1. To open the Device Manager, press the Windows key + R, type devmgmt.msc, and press Enter. Check the IDE ATA/ATAPI controllers (for IDE) section, or the Storage controllers (for SATA) section.

  2. Do one of the following:

Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.

  1. To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.

  2. If the hard drive is listed as healthy but does not have a drive letter, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.

Note: A formatted hard drive does not show up in Computer or My Computer until it has a drive letter assigned to it.