StarTech.com
Niet meer leverbaar

24in Latching SATA to Right Angle SATA Serial ATA Cable

A space-saving, latching right angle SATA hard drive cable, for installations in tight spaces.

Productcode: LSATA24RA1

  • Compliant with Serial ATA III Specifications
    Fast data transfer rate of up to 6 Gbps
€ 0,00 EUR exc BTW
€ 0,00 EUR inc BTW
Niet beschikbaar
Eventueel op voorraad bij partners
Waar te verkrijgen

Bezoek vandaag nog onze Europese online winkel voor meer producten zoals deze!

Overzicht

These right-angle Serial ATA cables guarantee you’ll be able to plug in your high-performance Serial ATA hard drives, no matter how tight your space is. Latching connectors provide secure connections for SATA hard drives and motherboards that support this feature.

With their thin, narrow construction, these flexible cables improve airflow and reduce clutter in your case, helping to keep your case clean and cool. And, like all our cables, they’re backed by our lifetime warranty.

StarTech.com Voordeel

  • A cost-effective solution for creating secure SATA drive connections in tight spaces
  • Easy to use and install
  • Backed by StarTech.com's lifetime warranty

Technische specificaties

Garantie
Garantie Lifetime
Hardware
Type kabelmantel PVC - Polyvinyl Chloride
Prestaties
Type en snelheid SATA III (6 Gbps)
Connector(en)
Connector A 1 - SATA (7-polig, data) Vergrendelbaar Contact
Connector B 1 - SATA (7-polig, data) Vergrendelbaar Contact
Fysieke eigenschappen
Kabellengte 609.6 mm [24 in]
Kleur Rood
Stijl connector Recht naar haaks rechts
Verpakkingsinformatie
Verzendgewicht (verpakt) 0 kg [0.1 lb]
Wat wordt er meegeleverd
Meegeleverd 1 - 24in SATA to Right Angle SATA Serial ATA Cable

Certificaties

Productondersteuning

Veelgestelde vragen (FAQ)

Troubleshooting

When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Hard disk drive

  • Hard drive controller (for example, motherboard)

  • SATA cable

To test your setup components, try the following:

  • Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.

  • Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:

  • Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.

  • If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.

For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.