DVI to VGA Cable Adapter - Black - F/M
Use your DVI-I Display with a VGA video card
Product ID: DVIVGAFMBK
- Molded Connector with thumbscrews
- Quick and easy installation. No settings and no software required.
The DVIVGAFMBK DVI-A to VGA Display Adapter (F/M) is used to convert a DVI male connector to a VGA male connector.
The DVI to VGA adapter is constructed of high quality materials, to ensure dependability, and is backed by StarTech.com's lifetime warranty.
Please Note: This product is intended for connections between DVI-I devices, passing an analog signal, to VGA devices. If your device uses a DVI-D connector, please refer StarTech.com's DVI to VGA Converter DVI2VGACON.
The StarTech.com Advantage
- Cost-effective solution for connecting an analog Flat Panel Display to a PC or Mac® computer with VGA output
- Backed by StarTech.com lifetime warranty
Connect a DVI-I monitor to a VGA video card (flat panel monitors, projectors, and HDTV's)
|Active or Passive Adapter||Passive|
|Cable Jacket Type||PVC - Polyvinyl Chloride|
|Connector A||1 - VGA (15 pin, High Density D-Sub) Male|
|Connector B||1 - DVI-I (29 pin) Female|
|Product Weight||34 g [1.2 oz]|
|Shipping (Package) Weight||36 g [1.3 oz]|
|What's in the Box|
|Included in Package||1 - DVI to VGA Cable Adapter - Black - F/M|
Connect your DVI-I Display to a VGA video card.
Connect your VGA Display to a DVI-I source
Connect your VGA Display to a DVI-I source
Frequently Asked Questions
Before You Buy
This is a passive video signal converter.
A passive video signal converter changes the type of connection that is being used but does not change the signal that passes through the converter. Because the video signal is not modified, passive converters tend to be smaller, simpler, and less expensive than active video signal converters. Examples of passive converters include DVI-I to VGA, HDMI to DVI, and DisplayPort to Mini-DisplayPort converters.
An active video signal converter modifies both the type of connection that is being used and the signal that passes through the converter. Because this type of conversion can be complex, active converters tend to be larger than passive video signal converters and sometimes require additional power. Examples of active converters include DVI-D to VGA, HDMI to DisplayPort, and VGA to HDMI converters.
For more information about passive and active DisplayPort video signal converters, refer to the following FAQ: https://www.startech.com/faq/DisplayPort_Converter_DP_Multi_Mode.
For more information about which type of video signal converter you should use when you convert video signals with an MST hub, refer to the following FAQ: https://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.
Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types:
- DVI-A (17 pin).
- DVI-D Single Link (19 pin).
- DVI-D Dual Link (25 pin).
- DVI-I Single Link (23 pin).
- DVI-I Dual Link (29 pin).
Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).
Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.
DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.