StarTech.com

IP67 Certified 2T2R 2.4GHz Outdoor Wireless-N Access Point - PoE-Powered 300 Mbps 802.11b/g/n WiFi AP

Add 2.4GHz WiFi coverage to an outdoor area, with a ruggedized industrial access point - PoE Powered

Product ID: R300WN22ODE

  • IEEE 802.11b/g/n (Wireless-N) compliant with speeds up to 300 Mbps @ 2.4GHz
  • Metal, IP67 certified pole and wall-mountable housing
  • PoE-powered access point with included PoE injector and PoE pass-through
View More
  • Supports AP, WDS and WISP operating modes
  • 800mW internal 10dBi 2T2R antenna
  • Supports WEP, WPA and WPA2 security with TKIP/AES encryption
  • Integrated MAC address control and QoS support
  • Built-in configuration utility (web-based)
  • +/-15kV air and +/-8kV contact ESD (Electrostatic Discharge) Protection
248,99 € EUR exc VAT
311,24 € EUR inc VAT
Not Available
May be in stock with partners
Where To Buy
From a Partner

For more products like this please visit our European online store today!

Overview

The R300WN22ODE Outdoor Wireless Access Point lets you add 2.4GHz Wireless-N network coverage to an outdoor area, through a ruggedized industrial access point.

This outdoor access point features an IP67 certified, die-cast metal enclosure with heavy-duty cable grommets so it can withstand the outdoor elements and offers pole and wall-mounting options. Plus, the PoE-powered AP includes a passive Power-over-Ethernet injector, enabling you to install it in locations where a typical power outlet is unavailable. PoE pass-through via the secondary LAN port lets you connect data and power to a PoE-capable device near the access point.

For optimal wireless coverage, the AP broadcasts a signal through a high-powered 800mW internal 10dBi 2T2R antenna, with 802.11b/g/n compatibility to easily connect most wireless devices new or old.

The device offers support for several different operating modes (AP, WDS and WISP), which help you to create a wireless network from a wired connection, bridge multiple APs together or extend the range of an existing wireless network. The AP supports Wireless-N data rates up to 300Mbps with security through WEP, WPA, or WPA2 authentication, all configurable through an easy-to-use web-based utility.

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

The StarTech.com Advantage

  • Withstand the harsh elements, with the rugged metal IP67 rated housing
  • Customize your wireless network as needed, with support for several operating modes
  • Deploy a PoE network device in remote locations with a secondary PoE pass-through LAN port

Applications

Create an outdoor Wireless-N access point from an existing wired or wireless connection to eliminate network dead spots and allow wireless devices to connect across large open spaces

Use WDS (Wireless Distribution System) to mesh multiple Access Points together

Connect smartphones, tablets or laptops to a Wireless B/G/N access point

Use the secondary LAN port to deploy remote PoE-Powered devices such as switches or IP cameras

Technical Specifications

Warranty Information
Warranty 2 Years
Hardware
Antenna Configuration 2x2:2 (TxR:S)
Chipset ID Atheros - AR9341
Industry Standards IEEE 802.3, IEEE 802.3u IEEE 802.11b/g/n
IP67 certified
Interface Wireless Ethernet
Performance
Bandwidth 20/40 MHz
Frequency Range 2.4 ~ 2.4835 GHz
Full Duplex Support Yes
Max Distance 3.7 km (2.3 mi)
Maximum Data Transfer Rate 300 Mbps
Modulation OFDM, DSSS
Security Features TKIP/AES
WEP Data Encryption
WPA and WPA2-PSK Data Encryption
WPA and WPA2 Enterprise Data Encryption
Supported Protocols CSMA/CA
Connector(s)
Connector Type(s) 1 - Wireless N (IEEE 802.11n)
Internal Ports 2 - RJ-45 Female
Special Notes / Requirements
System and Cable Requirements Available indoor AC electrical outlet
Cat 5 (or better) network cabling from PoE Injector to Wireless AP and PoE Injector to LAN Switch/router (no more than 100m total)
Indicators
LED Indicators 3 - Wireless Signal Strength
1 - Power
2 - LAN Link / Activity
Power
Center Tip Polarity Positive
Input Current 1 A
Input Voltage 100 ~ 240 AC
Output Current 0.5 A
Output Voltage 48 DC
Plug Type N
Power Consumption (In Watts) 13.5
Power Source AC Adapter Included
Environmental
Humidity 100% RH Non-Condensing
Operating Temperature -30°C to 60°C (-22°F to 140°F)
Storage Temperature -30°C to 85°C (-22°F to 185°F)
Physical Characteristics
Color Gray
Enclosure Type Aluminum and Plastic
Product Height 58 mm [2.3 in]
Product Length 161 mm [6.3 in]
Product Weight 686 g [24.2 oz]
Product Width 100 mm [3.9 in]
Packaging Information
Shipping (Package) Weight 1246 g [44 oz]
What's in the Box
Included in Package 1 - Outdoor Wireless Access Point
1 - PoE Injector
1 - Pole Mounting Kit
1 - Power Adapter
1 - Quick Start Guide

Certifications

Related Products

IP67 Certified 2T2R 5GHz Outdoor Wireless-N Access Point - PoE-Powered 300Mbps 802.11a/n WiFi AP
R300WN22MO5E
IP67 Certified 2T2R 5GHz Outdoor Wireless-N Access Point - PoE-Powered 300Mbps 802.11a/n WiFi AP

Add 5GHz WiFi coverage to an outdoor area, with a ruggedized industrial access point - PoE Powered

248,99 € exc VAT
311,24 € inc VAT
Outdoor 150 Mbps 1T1R Wireless-N Access Point - 2.4GHz 802.11b/g/n PoE-Powered WiFi AP
AP150WN1X1OE
Outdoor 150 Mbps 1T1R Wireless-N Access Point - 2.4GHz 802.11b/g/n PoE-Powered WiFi AP

Create a long-range, high-performance Wireless-N network from a wired connection – PoE powered

89,99 € exc VAT
112,49 € inc VAT
Outdoor 300 Mbps 2T2R Wireless-N Access Point - 5GHz 802.11a/n PoE-Powered WiFi AP
R300WN22OP5E
Outdoor 300 Mbps 2T2R Wireless-N Access Point - 5GHz 802.11a/n PoE-Powered WiFi AP

Create or extend the range of a Wireless-N (300Mbps) WiFi network to an outdoor location

109,99 € exc VAT
137,49 € inc VAT

Accessories