Are you in the United States?
Visit our U.S.A. & International site for relevant pricing, distribution and product availability information.
Go to StarTech.com12U Sideways Wall-Mount Rack for Servers
Wall Mount your Server or Networking Equipment Sideways, for Easy Access
Product ID: RK1219SIDEM
- Wall mount holes are 16" from center-to-center, for mounting to any standard wooden studs (easily mounts to concrete or steel as well)
- Package includes all necessary screws/nuts for mounting equipment
- TAA compliant for GSA Schedule purchases
- Mounts equipment facing perpendicular to the wall
- Sturdy SPCC cold-rolled steel construction
- Open frame design for optimum airflow
- Ships fully assembled and ready to use
Not Available
May be in stock with partners
From a Partner
Support
Overview
The RK1219SIDEM Wall Mount/Side Mount Deep Open Frame Rack/Cabinet (12U, 19in Wide) lets you mount your servers, A/V or network equipment facing perpendicular to the wall for easy access to mounted devices and equipment. The cabinet/rack features open access to both the front and back of your devices, making it easy to adjust cabling, view LEDs and access configuration buttons as needed; plus, the nature of the sidemount configuration allows for deeper mounting depths than typical wallmount racks. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.
Constructed of high-quality SPCC cold-rolled steel, for strength and durability, the open frame equipment rack allows for maximum airflow while still supporting a maximum weight capacity of 159 kg (350 lbs). The wall mount rack also ships complete with all of the M5 screws and cage nuts required to mount your equipment, saving the expense of purchasing them separately.
Backed by a StarTech.com Lifetime warranty.
The StarTech.com Advantage
- Sidemount wall configuration allows for a much greater mounting depth than typical wallmount racks, to accommodate nearly any equipment
- Side mount design provides easy front and back access to equipment for ease of setup and troubleshooting
- Open-frame racks allow for maximum airflow that helps to keep your equipment operating temperatures cooler for smoother operation and longer lifespan
Applications
Perfect for installing network switches out of the way and high up on a wall in a branch office, warehouse, or superstore location
Ideal for small and medium businesses requiring small rack solutions dispersed throughout the organization
Mount Audio/Video broadcast or distribution components
Technical Specifications
Product Numbers | ||
---|---|---|
Ingram DK | V931681 | |
UPC Code | 065030845052 |
Warranty Information | ||
---|---|---|
Warranty | Lifetime | |
Hardware | ||
Adjustable Mounting Rails | No | |
Cable Management | No | |
Casters | No | |
Fan(s) | No | |
Frame Type | Open Frame | |
Front Door Construction | Open | |
Industry Standards | EIA-310-D | |
EIA RS310-D | ||
Ladder Offset | 18 mm [0.7 in] | |
Ladder Type | L-Shape | |
Mounting Holes | Square | |
Mounting Options | Front Mount (Front and Rear) | |
Number and Type of Included Cage Nuts | 48 - M5 | |
Rack Type | 4-Post | |
Tools Included | No | |
U Height | 12U | |
U Markings | No | |
Wallmountable | Yes | |
Performance | ||
Weight Capacity (Stationary) | 159 kg [351.4 lb] | |
Physical Characteristics | ||
Color | Black | |
Enclosure Type | Steel | |
External Depth | 566 mm [22.3 in] | |
External Height | 659 mm [25.9 in] | |
External Width | 538 mm [21.2 in] | |
Internal Width | 533 mm [21 in] | |
Minimum Mounting Depth | 529 mm [20.8 in] | |
Product Height | 659 mm [25.9 in] | |
Product Length | 566 mm [22.3 in] | |
Product Weight | 18.8 kg [41.5 lb] | |
Product Width | 538 mm [21.2 in] | |
Rail Thickness | 2 mm [0.1 in] | |
Packaging Information | ||
Flat Pack (Assembly Required) | No | |
Shipping (Package) Weight | 22.6 kg [49.9 lb] | |
What's in the Box | ||
Included in Package | 1 - 12U Rack | |
48 - M5 Screws | ||
48 - M5 Cage Nuts |
Related Products
12U 19in Hinged Wall Mount Server Rack Cabinet w/ Steel Mesh Door
Store your servers, network and telecommunications equipment securely in this 12U wall-mountable rack
12U 19in Wall Mounted Server Rack Cabinet
Store your servers, network and telecommunications equipment securely in this 12U wall-mountable rack
8U Open Frame Wall Mount Equipment Rack - Adjustable Depth
Mount your network and telecommunications equipment with the convenience of adjustable depth
8U Open Frame Wall Mount Equipment Rack - 30,5 (12 in.) Deep
Mount your servers, network and telecommunications equipment in this 8U open-frame wall-mountable rack
Wall-Mount Server Rack - 4U
Vertically mount your server or networking equipment to a wall, in this low-profile cabinet
Wall-Mount Server Rack - 2U
Vertically mount your server or networking equipment to a wall, in this low-profile cabinet
4U 19in Steel Vertical Wall Mount Equipment Rack Bracket
Mount server, network or telecommunications devices vertically with this 4U wall-mountable rack
6U 30cm (12in) Deep Wall Mounting Bracket for Patch Panel
Mount networking equipment and shallow rackmount devices with this 6U wall-mountable rack
Accessories
Black Standard Universal Server Rack Cabinet Shelf
Add a sturdy, fixed shelf into almost any server rack or cabinet
1U 7in Depth Universal Fixed Rack Mount Shelf – 33lbs / 15kg
Add a 1U Compact Storage Shelf to any Standard 19" Server Rack or Cabinet
2U Adjustable Mounting Depth Vented Sliding Rack Mount Shelf – 50lbs / 22.7kg
Increase peripheral and equipment accessibility with this vented sliding cabinet shelf
3U 22 cm (9 in.) Deep Rackmount Locking Storage Drawer
Add a rugged 3U storage drawer to any standard 19in server rack or cabinet
4U Black Steel Storage Drawer for 48 cm (19 in.) Racks and Cabinets
Add a rugged 4U storage drawer to any standard 19in server rack or cabinet
50 Pkg M6 Mounting Screws and Cage Nuts for Server Rack Cabinet
Mount server, telecom and A/V equipment with these high quality mounting screws and nuts
50 Pkg M5 Mounting Screws for Server Rack Cabinet
Mount server, telecom and A/V equipment with these high quality screws
50 Pkg M5 Cage Nuts for Server Rack Cabinets
Mount server, telecom and A/V equipment with these high quality nuts
M6 Cage Nuts - 100 Pack, Black
Install your rack-mountable hardware securely with these high-quality cage nuts
M6 Cage Nuts - 100 Pack
Install your rack-mountable hardware securely with these high-quality cage nuts
M5 Cage Nuts - 100 Pack, Black
Install your rack-mountable hardware securely with these high-quality cage nuts
M6 Cage Nuts - 50 Pack, Black
Install your rack-mountable hardware securely with these high-quality cage nuts
M5 Cage Nuts - 100 Pack
Install your rack-mountable hardware securely with these high-quality cage nuts
50 Pkg M6 Cage Nuts for Server Rack Cabinet
Install your rack-mountable hardware securely with these high quality cage nuts
M5 Cage Nuts - 50 Pack, Black
Install your rack-mountable hardware securely with these high-quality cage nuts
50 Pkg M5 Mounting Screws and Cage Nuts for Server Rack Cabinet
Install your rack-mountable hardware securely with these high quality screws and nuts
100 Pkg M5 Mounting Screws and Cage Nuts for Server Rack Cabinet
Install your rack-mountable hardware securely with these high quality screws and nuts
M5 x 12mm - Screws and Cage Nuts - 100 Pack, Black
Install your rack-mountable hardware securely with these high-quality screws and nuts
M5 x 12mm - Screws and Cage Nuts - 50 Pack, Black
Install your rack-mountable hardware securely with these high-quality screws and nuts
100 Pkg M6 Mounting Screws and Cage Nuts for Server Rack Cabinet
Install your rack-mountable hardware securely with these high quality screws and nuts
M6 x 12mm - Screws and Cage Nuts - 100 Pack, Black
These high-quality M6 x 12mm screws and cage nuts make it easy to mount equipment in your server rack or cabinet
M6 x 12mm - Screws and Cage Nuts - 50 Pack, Black
These high-quality M6 x 12mm screws and cage nuts make it easy to mount equipment in your server rack or cabinet
M5 x 12mm - Mounting Screws - 50 Pack, Black
Install your rack-mountable hardware securely with these high-quality screws
M5 x 12mm - Mounting Screws - 100 Pack
Install your rack-mountable hardware securely with these high-quality screws
M5 x 12mm - Mounting Screws - 100 Pack, Black
Install your rack-mountable hardware securely with these high-quality screws
50 Pkg M6 Mounting Screws for Server Rack Cabinet
Install your rack-mountable hardware securely with these high quality screws
M6 x 12mm - Mounting Screws - 50 Pack, Black
Install your rack-mountable hardware securely with these high-quality screws
M6 x 12mm - Mounting Screws - 100 Pack, Black
Install your rack-mountable hardware securely with these high-quality screws
1U 19in Metal Rackmount Cable Management Panel
Organize and manage network, server and KVM cabling in your server rack
1U 19in Metal Rackmount Cable Management Panel
Organize and manage network, server and KVM cabling in your server rack
1U Brush Strip Horizontal Server Rack Cable Management Panel
Organize cables while keeping dust out of the rack with a brush-style cable manager
1U Horizontal Finger Duct Rack Cable Management Panel with Cover
Organize cables in your server rack or cabinet with a horizontal, covered cable duct
2U Horizontal Finger Duct Rack Cable Management Panel with Cover
Organize cables in your server rack or cabinet with a horizontal, covered cable duct
1U Vertical Server Rack Cable Management D-Ring Hook - 2.2x3.9in (5.7x10cm)
Add a cable management hook to your server rack or cabinet for strain relief and organization
1U Vertical Server Rack Cable Management D-Ring Hook -5.7cm x 15cm (2.2 in. x 5.9 in.)
Add a cable management hook to your server rack or cabinet for strain relief and organization
1U Vertical Server Rack Cable Management D-Ring Hook - 1.8x3.9in (4.5x10cm)
Add a cable management hook to your server rack or cabinet for strain relief and organization
Multi-Directional Vertical Server Rack Cable Management D-Ring Hook 2.4x3.9in (6x10cm)
Add an internal or external facing cable management hook for strain relief and organization
2U Double-Sided Horizontal Cable Management Panel with Finger Duct & D-Ring Hooks
Organize horizontal cabling in your server rack, with a combination Finger Duct / D-Ring Hook panel
Cable Management Panel with Hook and Loop Strips for Server Racks - 1U
Reduce clutter, by routing cables in your server rack or cabinet using this 4-loop cable organizer
24 Port 0.5U Cat5e Patch Panel - RJ45 Ethernet Rackmount Cat 5e 110 Patch Panel
Organize up to 24 Cat5e patch cables using only 0.5U of rack space
Product Support
Drivers & Downloads
Diagram(s):
Manual(s):
-
RK1219SIDEM.pdf
English
Compliance Letter(s):
Data Sheet(s)
- RK1219SIDEM_Datasheet-EN-EU.pdf
English
Frequently Asked Questions
Before You Buy
If a server rack accessory is listed on a server rack's product page under the Accessories tab, it will fit in the server rack.
Server racks offered by StarTech.com have an industry standard width of 19 inches, but can have varying height and depth. The mounting depth is important when you choose a shelf to be used as an accessory. Shelves that mount on all four corners of a server rack, such as 4-post server racks and cabinet server racks, will all have a maximum mounting depth. Many of these server racks and shelves are adjustable, which means that there will be a minimum and maximum mounting depth. This information can be found on individual product pages under the Technical Specifications tab. It is important that the depth of the shelf is compatible with the server rack's minimum and maximum mounting depths so that it can be mounted. If a shelf only mounts on the front on a server rack, the mounting depth is not relevant as long as there is enough clearance behind the mounting point to accommodate the full depth of the shelf.
Copy Link
Was this information helpful? Yes No
Server racks are a great way to organize small spaces that require a lot of technology packed into them. However, there are a few important things you need to keep in mind before making a purchase. Today we will be explaining what a U is, and the differences between 2 and 4-post and open and closed server racks. We will also be covering what minimum and maximum mounting depth mean to you.
A server rack unit, or U, is a unit of measurement used to describe the amount of equipment space a server rack has. A U is 1.75 inches or 44.45mm high. An 8u rack has 8 units of vertical server rack space.
Note: Equipment can be more than 1U in size.
When you purchase server rack accessories they will list their size in U’s. Make sure the server rack has space to accommodate the accessory.
StarTech.com sells 2-post and 4-post server racks. 2-post racks take up less space but generally do not have as high of a weight capacity.
4-post server racks can be open or closed. Open racks are more accessible than closed racks, while closed racks can be locked for security purposes. Closed racks can include glass or mesh variations. closed server racks are generally better at reducing equipment noise and also limit external access. Mesh server racks provide better unmanaged airflow.
Adjustable 4-post server racks have a minimum and maximum mounting depth. The minimum mounting depth is the shallowest you can construct it. The maximum mounting depth is the longest measurement a product can be while still fitting in the server rack. If the server rack is adjustable, this measurement is also the deepest it can be constructed. Keep in mind that when you install equipment that is close to the maximum mounting depth, there will be little to no room for cable management at the back of the rack.
Server rack accessories my have their own minimum and maximum mounting depths listed on the product page under the technical specifications tab. It is recommended that you confirm these measurements will work with your server rack.
You should consider the following things when shopping for server racks:
- You can mount equipment on both sides of a 4-post rack, provided the combined measurements of both items are under the server rack's maximum mounting depth.
- Decide if you want casters on your server rack, want your rack bolted to the floor, or if you want to leave it free standing. StarTech.com offers racks that come with casters and racks that you can bolt to the floor. StarTech.com also sells casters separately. Casters that fit on your server rack will appear on the StarTech.com product page under accessories.
Copy Link
Was this information helpful? Yes No
There’s a wide variety of accessories for server racks and today the various options will be explored. Here are the accessories that will be discussed.
- Shelves
- Rack rails and DIN rails
- Casters and leveling feet
- Cable management
- Rack blank panels
- Power Distribution Units (PDUs)
Server rack shelves come in a variety of sizes and styles. We will be covering six different types of server rack shelves.
Server rack shelves have both a U size and depth. The U size describes the height of the shelf in rack units, and one U is equal to 1.74 inches. Shelves might also list a maximum suggested weight and some shelves are available in a vented design for greater airflow.
Fixed shelves have a fixed depth. If you use a server rack with fixed shelves, make sure your rack equipment fits within the mounting depth of the shelf you are purchasing.
Unlike fixed shelves, you can adjust the depth of adjustable shelves. The minimum and maximum mounting depths for adjustable shelves are listed on the product page, under the Technical Specifications tab.
Sliding shelves can be slid in or out of a server rack. These shelves have a lock feature that locks the shelf and prevents it from accidentally falling out or sliding back into the server rack. The minimum and maximum mounting depths for sliding shelves are listed on the product page, under the Technical Specifications tab.
Similar to sliding shelves, drawer shelves feature a sliding storage drawer that is perfect for storing tools, small hardware or other accessories.
Cantilever shelves do not attach to the server rack on all 4 corners; instead, they only attach on one side of the server rack. These shelves generally have lower weight thresholds.
Heavy duty shelves are designed to hold more weight. They are a more durable solution for storing large pieces of equipment that can’t be mounted in a server rack.
Startech.com offers both rack rails and DIN rail kits.
Rack Rails are available in several different U sizes and are often adjustable, allowing you to customize the depth of your server equipment.
DIN Rails are an industry standard for server rack equipment, and StarTech.com offers a DIN Rail kit which fits all standard 19” racks. This kit features adjustable depth and the entire kit occupies 2 U’s of rack space. As with other server rack accessories, check on the product page under the Technical Specifications tab to make sure your equipment will fit within the product’s measurements.
Casters and levelling feet are two of the commonly used methods of mounting a rack on the floor. To determine whether your rack includes casters or levelling feet, on the product page, check the Technical Specifications tab, under the heading What’s in the Box.
Cable management accessories include cable management hooks, panels, and conduits or ducts. More information will be shared on them below.
Cable management hooks are designed to hold cabling to avoid cable knotting or crimping. They are also sometimes referred to as D-Ring hooks and can be found in a variety of sizes.
Cable management ducts or conduits are used to route cables through a covered cable duct. These ducts feature a removable top cover so that you can easily add or remove cables.
A cable management panel consists of several cable management hooks and/or ducts, combining these products for an all-in-one cabling solution.
Rack blanking panels are sometimes called filler panels as they are designed to fill the openings in server racks that are not in use. This provides security as well as physical protection for the equipment in the server rack. Rack blanking panels can be vented or solid and come with or without hinges.
Power distribution units or PDU’s add additional power outlets to your server rack. They are available in U based sizes, such as 1U and some of the more advanced units include power switching, which you can use to power on and off the connected devices over an IP network.
Confirm the number of outlets and the U size you need in your server rack PDU before you make a purchase.
There are a few ways you can find information about server rack accessories on www.StarTech.com.
- To view the different families of server rack accessories, go to the StarTech.com website. Under Server Management, click Server Rack Accessories. This opens a page with each family of server rack accessories.
- On individual product pages, you can view an image gallery which includes detailed pictures of the product.
- The Technical Specifications tab includes the product's dimensions, and what comes with the product.
- The Accessories tab lists other products that are confirmed to work with the product you are viewing.
If you have questions about any StarTech.com server rack accessories, contact our technical support team for further assistance.
Copy Link
Was this information helpful? Yes No
* Product appearance and specifications are subject to change without notice.