Premium High Speed HDMI Cable with Ethernet - 4K 60Hz - 3 m (10 ft.)

HDMI 2.0 offers some new features that were not available with the HDMI 1.4 standard, including the following:

• 4K resolution (4096x2160) at 60 Hz
• 21:9 aspect ratio support
• Four audio streams
• High-bandwidth Digital Content Protection (HDCP) version 2.2

Although HDMI 2.0 is backwards compatible with older HDMI standards, newer HDMI devices need to support HDCP 2.2 in order to display new content. If you use an HDMI device that only supports HDCP 2.0, an error will be displayed when you try to display content that has HDCP 2.2.

When you troubleshoot issues with an HDMI cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

• HDMI cable

• Video source

• Video destination

To test your setup components, try the following:

• Use the HDMI cable, video source, and video destination in another setup to see if the problem is with the components or the setup.

• Use a different HDMI cable, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the HDMI cable, video source, and video destination, it is recommended that you do the following:

• Verify that the source resolution matches the capabilities of the video source destination. For example, if the video destination is only capable of 720p, then the video source cannot output 1080p or 1920 x 1080, as that exceeds the capabilities of the video source destination.

• Test at a lower resolution, for example, 1024 x 768.

• If you are using 4K resolutions, test with a shorter cable.

If you are experiencing issues with audio over HDMI, ensure that the following is true:

• The source is set up to output audio over HDMI.

• The destination is compatible with the source's audio format.

• The destination's volume was raised.

Note: HDMI to DVI cables, adapters and converters do not support audio unless otherwise noted in the Technical Specifications tab on the product page on the StarTech.com website.