Micro SATA to SATA Adapter Cable with Power
Connect a 5V or 3.3V Micro SATA hard drive to a standard SATA controller and SATA power supply connection
Product ID: MCSATAADAP
The StarTech.com Advantage
- Eliminate the need to replace your SATA controller, by connecting a 5V or 3.3V Micro SATA drive to a standard SATA controller and SATA power supply connection
- Backed by StarTech.com's lifetime warranty
Connect Micro SATA hard drives to older SATA controllers
|Ingram Micro Belgium||1614288|
|Ingram Micro España||V931115|
|Ingram Micro Italy||V931115|
|Ingram Micro Netherlands||1614288|
|ALSO DEUTSCHLAND GMBH||2776487|
|Ingram Micro France||V931115|
|Ingram Micro Sweden||V931115|
|Tech Data - Belgium||4462382|
|Tech Data - Netherlands||4462382|
|Cable Jacket Type||PVC - Polyvinyl Chloride|
|Connector A||1 - Micro SATA (16 pin, Data & Power) Receptacle|
|Connector B||1 - SATA Data & Power Combo (7+15 pin) Plug|
|Product Length||46 mm [1.8 in]|
|Product Weight||20 g [0.7 oz]|
|Product Width||34.5 mm [1.4 in]|
|Shipping (Package) Weight||0 kg [0 lb]|
|What's in the Box|
|Included in Package||Micro SATA to SATA Adapter Cable with Power|
Drivers & Downloads
Frequently Asked Questions
When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Hard disk drive
Hard drive controller (for example, motherboard)
To test your setup components, try the following:
Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.
Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:
Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.
If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.
For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.
* Product appearance and specifications are subject to change without notice.