2 Port CardBus eSATA Laptop Controller Adapter Card

Adds 2 eSATA ports to a laptop through a CardBus slot

Product ID: CBESAT2

  • Compatible with 32-bit CardBus
  • Data transfer rates up to 150MBps
  • Plug and Play installation gets you up and running instantly
View More
  • Provides you with a faster transfer rate opposed to USB and FireWire
  • Supports two high-speed eSATA channels for SATAI/II device connections
  • Two external Serial ATA (eSATA) ports
9,99 € EUR exc VAT
9,99 € EUR inc VAT


This 2 port CardBus eSATA Adapter offers a cost-effective external storage solution that allows eSATA laptop connections to external SATA devices.

The eSATA laptop (PCMCIA) adapter is ideal for making routine backups or dumping data to SATA hard drives.

The eSATA CardBus Adapter presents a convenient way to protect your valuable data, with full external SATA data transfer speeds of up to 150MBps.

The Advantage

  • Free Lifetime Technical Support
  • Gives you 2 eSATA ports from your laptop
  •'s Lifetime Warranty
  • With a maximum data transfer rate of 150MBps, it makes it easier to do data off loads


Enables effortless transport of high-capacity and high-performance Serial ATA hard drives

Gives you 2 eSATA ports from your laptop

With a quicker maximum data transfer rate (150MBps), it makes it easier to do data off loads

Technical Specifications

Warranty Information
Warranty Lifetime
Bus Type CardBus (PCMCIA)
Chipset ID Silicon Image - Sil3512
Interface eSATA
Ports 2
Maximum Data Transfer Rate 150Mbps
Port Multiplier No
Type and Rate SATA II (3 Gbps)
Connector Type(s) 1 - PC Card (Type II, Cardbus)
2 - eSATA (7 pin, Data) Plug
Microsoft WHQL Certified Yes
OS Compatibility Windows 98SE/ ME/ 2000/ XP (32/64-bit)/ Server 2003 (32/64-bit)/ Server 2008 R2/ Vista (32/64-bit)/ 7 (32/64-bit)
Linux 2.6 to 4.4.x LTS Versions only
Humidity 0 to 85% RH
Operating Temperature 0°C to 70°C (32°F to 158°F)
Storage Temperature -10°C to 85°C (14°F to 185°F)
Physical Characteristics
Product Height 15 mm [0.6 in]
Product Length 115 mm [4.5 in]
Product Weight 42.9 g [1.5 oz]
Product Width 55 mm [2.2 in]
Packaging Information
Shipping (Package) Weight 0.3 kg [0.8 lb]
What's in the Box
Included in Package 1 - 2 Port eSATA CardBus Card
1 - Driver CD
1 - Instruction Manual


View full OS compatibility
Windows 98SE/ ME/ 2000/ XP (32/64-bit)/ Server 2003 (32/64-bit)/ Server 2008 R2/ Vista (32/64-bit)/ 7 (32/64-bit)
Linux 2.6 to 4.4.x LTS Versions only



Product Support

Drivers & Downloads

    Windows 64bit:
    Windows 32bit:
Data Sheet(s)

Frequently Asked Questions

Before You Buy

Although you can adapt a Serial Attached SCSI (SAS) drive to connect to a standard SATA controller card, the card must support SAS commands in order to communicate with SAS drives. SAS drives have a different command set that is not present on SATA controllers.

This SATA controller card only supports standard SATA drives.

This device does not support the ATA Packet Interface (ATAPI) protocol. ATAPI is required for optical drives, including CD-ROM drives, DVD-ROM drives, and Blu-ray players. Because this device does not support ATAPI, optical drives are also not supported over any IDE, SATA, or eSATA connections.

For a list of products that do support ATAPI, refer to the following FAQ: