USB to SATA Converter for Raspberry Pi and Development Boards
Connect any SATA device to your development board, to increase its data storage capacity and performance
Product ID: PIB2S31
- Connect your Raspberry Pi board to any SATA device: SSD, HDD, DVD-ROM, DVD-RW, CD-ROM, or CD-RW
- Supports SATA I, II and III
- USB 2.0 with data transfer speeds up to 480Mbps
- OS independent with no device driver installation required
- Includes USB cable and mounting accessories for Raspberry Pi
Technical Specifications
| Warranty Information | ||
|---|---|---|
| Warranty | 2 Years | |
| Hardware | ||
| Bus Type | USB 2.0 | |
| Chipset ID | Renesas/NEC - µPD720231A | |
| Compatible Drive Types | SATA | |
| Interface | USB 2.0 | |
| Number of Drives | 1 | |
| Performance | ||
| ATAPI Support | Yes | |
| Maximum Data Transfer Rate | 480 Mbps | |
| MTBF | 6,481,043 hrs | |
| Type and Rate | USB 2.0 - 480 Mbit/s | |
| SATA III (6 Gbps) | ||
| Connector(s) | ||
| Drive Connectors | 1 - 7 pin SATA Data Plug | |
| Host Connectors | 1 - USB Micro-B (5 pin) | |
| Software | ||
| OS Compatibility | OS independent; No software or drivers required | |
| Power | ||
| Power Source | USB-Powered | |
| Environmental | ||
| Humidity | 15% ~ 90% RH | |
| Operating Temperature | 5°C to 50°C (41°F to 122°F) | |
| Storage Temperature | -25°C to 70°C (-13°F to 158°F) | |
| Physical Characteristics | ||
| Color | Red | |
| Product Height | 11 mm [0.4 in] | |
| Product Length | 66 mm [2.6 in] | |
| Product Weight | 7.6 g [0.3 oz] | |
| Product Width | 23 mm [0.9 in] | |
| Packaging Information | ||
| Shipping (Package) Weight | 70.4 g [2.5 oz] | |
| What's in the Box | ||
| Included in Package | 1 - USB to SATA converter | |
| 1 - USB-A to Micro-B cable | ||
| 2 - standoffs | ||
| 2 - nuts | ||
| 2 - screws | ||
| 1 - quick-start guide | ||
No additional drivers or software required.
Certifications
Related Products
USB to mSATA Converter for Raspberry Pi and Development Boards
Connect an mSATA drive to your development board, to increase its data storage capacity
USB to M.2 SATA Converter for Raspberry Pi and Development Boards
Connect an M.2 SATA drive to your development board, to increase data storage capacity
mSATA SSD to 2.5in SATA Adapter Converter
Convert an mSATA SSD into a 7mm high 2.5in SATA 6Gbps Open Frame SSD
USB 3.1 (10Gbps) mSATA Drive Enclosure - Aluminum
Turn your mSATA or mSATA Mini drive into a portable, high performance storage solution over USB 3.1 Gen 2
Dual mSATA SSD to 2.5 SATA RAID Adapter Converter
Build a RAID array with two mSATA SSDs that can be installed into a single 2.5in SATA bay
SATA to mSATA SSD Adapter w/ Full and Low Profile Brackets – SATA to Mini SATA Converter Card
Mount an mSATA SSD into your standard or small form factor desktop computer, using a standard SATA host connection
SATA Drive to mSATA Host Adapter for 2.5in / 3.5in SATA Drives
Turn an mSATA host connection into a standard SATA port
mSATA Drive to SATA Host Adapter for mSATA SSDs
Turn a SATA host connection into an mSATA port
2.5in SATA to Mini SATA SSD Adapter Enclosure
Convert an mSATA mini-SSD into a Standard 2.5in SATA SSD
3-Port M.2 SSD (NGFF) Adapter Card - 1 x PCIe (NVMe) M.2, 2 x SATA III M.2 - PCIe 3.0
Mount both PCIe (NVMe) and SATA based M.2 SSDs inside your computer using this PCI Express adapter card
2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe
Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCI Express
2x M.2 SSD Controller Card - PCIe
Add two Next Generation Form Factor (NGFF) M.2 SATA SSDs to your computer through PCI Express
Accessories
15cm (6in) Micro USB Cable - A to Micro B
Charge or sync micro USB mobile devices from a standard USB port on your desktop or mobile computer
30cm (1ft) Micro USB Cable - A to Micro B
Charge or sync micro USB mobile devices from a standard USB port on your desktop or mobile computer
