1-Port to 4-Port VDSL2 Ethernet Extender Kit Over Single-Pair Wire - 10/100Mbps - 1km
Scale your 10/100 Mbps Ethernet network 1km over RJ11 phone lines and remotely connect four RJ45 network devices
Product ID: 410VDSLEXT2
- Reduce additional expenses using your existing phone line infrastructure or RJ11 cable
- Connect multiple RJ45 network devices directly to the receiver, with an integrated 4-port Ethernet switch
- Create a convenient point-to-point extension over longer distances than standard 10/100Mbps Ethernet cable
The 1-port to 4-port VDSL2 Ethernet extender kit lets you connect up to 4 remote network segments or devices to your network, using RJ11 phone cable.
This VDSL2 extender is easy to use and integrates a 4-port Ethernet switch on the receiver unit, which reduces the expense of purchasing additional network switches or routers.
Span your network, even across long distances
The extender reduces the hassle of networking your isolated devices or server rooms by overcoming the 330ft (100m) distance limitations of common CATx Ethernet cable. It’s perfect for connecting remote IP cameras or user workstations using single-pair copper wire such as telephone cable.
The versatile extender spans your network at distances up to 3300ft (1000m) at 40Mbps, or 1000ft (300m) at 100Mbps throughput.
Save your money, use with existing infrastructure
With a built-in 4-port Ethernet switch, you don’t have to purchase additional networking equipment at the remote location. Plus, you can deliver network access across the existing phone line infrastructure for added cost savings, or simply use a single point-to-point RJ11 cable.
The reliable extender is ideal for networking separate buildings at the same location, or for use in older buildings that only have plain old telephone service (POTS). It gives you more network connectivity options in locations where standard CATx wired or wireless access is unavailable or unreliable.
Suits your needs, right out-of-the box
This extender kit is the perfect all-in-one extension solution. With an integrated DIP switch as well as web-based customization, you have all the tools needed for simple yet effective network extension and management.
The web-interface lets you tweak settings such as IP, port, and MAC address filtering, and to get you up and running quickly there’s no driver or software installation required.
The 410VDSLEXT2 is backed by a StarTech.com 2-year warranty and free lifetime technical support.
Connect users in isolated areas of a large complex or separate buildings using existing RJ11
Deploy in stone, concrete, or heritage buildings where network connectivity is typically unavailable
Extend network access and connect multiple IP cameras or Wi-Fi access points in remote areas of a stadium, auditorium, or campus
|Chipset ID||Metanoia - MT3201
Metanoia - MT2201GL-B1
Metanoia - MT2301GL-A1
Metanoia - MT3301GN-A3
|Industry Standards||IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX|
|VDSL2 ITU-T G.993.2, VDSL ITU-T G.993.1, and VDSL2/VDSL ITU-T G.997.1 compliant|
|IEEE 802.3x Full Duplex Flow Control, IEEE 802.1Q VLAN Tagging, IEEE 802.1P Quality of Service (QoS)|
|Regulatory Approvals||EN61000-4-5 4KV
EN61000-4-2 - Air +/- 8KV, Contact +/- 4KV
|Full Duplex Support||Yes|
|Jumbo Frame Support||No|
|Max Distance||1 km (0.6 mi)|
|Maximum Data Transfer Rate||200 Mbps - Full-Duplex|
|MTBF||Transmitter Unit: 73,519 Hours
Receiver Unit: 66,436 Hours
|Local Unit Connectors||2 - RJ-45 Female|
|Remote Unit Connectors||4 - RJ-45 Female|
|1 - RJ-11 Female|
|Special Notes / Requirements|
|Note||Dimensions (LxWxH) and Weights (oz/g)
Transmitter Unit: 95 x 72 x 22 mm - 3.1 oz [87 g]
Receiver Unit: 178 x 130 x 37 mm - 10.6 oz [300 g]
|LED Indicators||Please see product manual|
|Center Tip Polarity||Positive|
|Input Current||0.36 A|
|Input Voltage||100 ~ 240 AC|
|Output Current||1.0 A|
|Output Voltage||12 DC|
|Power Consumption (In Watts)||4.5|
|Power Source||2 AC Adapters Included|
|Humidity||Transmitter Unit: 10~90% RH (Non-Condensing)
Receiver Unit: 10~95% RH (Non-Condensing)
|Operating Temperature||Transmitter Unit: 0°C to 50°C (32°F to 122°F)
Receiver Unit: 0°C to 45°C (32°F to 113°F)
|Storage Temperature||Transmitter Unit: -10°C to 70°C (14°F to 158°F)
Receiver Unit: -20°C to 70°C (-4°F to 158°F)
|Product Height||60 mm [2.4 in]|
|Product Length||180 mm [7.1 in]|
|Product Weight||408 g [14.4 oz]|
|Product Width||135 mm [5.3 in]|
|Shipping (Package) Weight||1.4 kg [3.1 lb]|
|What's in the Box|
|Included in Package||1 - 1 Port VDSL2 Ethernet Transmitter|
|1 - 4 Port VDSL2 Ethernet Receiver|
|2 - Universal Power Adapters (NA/UK/EU)|
|1 - RJ45 to VDSL2 Cable|
|1 - RJ11 Cable|
|1 - Instruction CD|
|1 - Instruction Manual|
Replace your lost or failed power adapter
Replace your lost or failed power adapter
Make Power-over-Ethernet-capable Gigabit network connections
Make reliable Ethernet connections in applications requiring CMR-rated cable
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.