USB Dual VGA over Cat5 KVM Console Extender - 650 ft / 200m
Operate a Dual VGA, USB-enabled PC up to 650ft away, as if it was installed locally
Product ID: SV565DUTPU
- Dual VGA KVM extender at 1920x1200 resolution
- Can be used with a single computer or connected to an existing KVM switch
- Extend up to 650 ft. (200 m) using 2 industry-standard UTP network cables
- KVM console connections available on both the local and remote end
- Supports most combo keyboard and mouse sets (including Wireless)
- Intuitive hot-key commands for fine-tuning video
Not Available
May be in stock with partners
From a Partner
Support
Overview
The SV565DUTPU USB Dual VGA KVM Console Extender over CAT5 UTP lets you Operate a Dual VGA PC or KVM switch up to 650ft (200 m) away, as if it was installed locally, at high-definition 1920x1200 resolution. PC connection cables are included with this product for a ready to use solution.
The dual VGA cat5 KVM extender supports easy to use hot-key and push button commands which allow you to switch between local and remote connected systems, while console connections at both ends of your setup provide easy access to all connected systems from either location. The hot-key commands also provide video adjustment controls for optimizing picture quality over varying distances. Extending over two standard Cat 5 (or better) cables gives you the ability to use existing infrastructure wiring to achieve remote access to your server or KVM switch.
Backed by a StarTech.com 3-year warranty and free lifetime technical support.
The StarTech.com Advantage
- Low cost way to convert existing dual VGA KVM units, or individual Servers into remotely accessible hardware extending your hardware’s capabilities
- Maintain network security with long distance local access without being exposed over IP
- Broad support for newer USB keyboards, mice, and even most combo/wireless configurations
Applications
Ideal for controlling a PC in an area where fan or hard drive noise is unacceptable such as a television broadcast studio
Control/Monitor a remote server from a harsh environment where the PC would not function properly due to heat/dust/etc. (factory, warehouse, mining, etc.)
Can act as a thin client for power users controlling powerful rack mounted servers as their desktop machines
Use one or more servers in a server room from a remote location within the same building or campus
Technical Specifications
| Product Numbers | ||
|---|---|---|
| Ingram Finland | V932110 | |
| UPC Code | 065030848237 | |
| Warranty Information | ||
|---|---|---|
| Warranty | 3 Years | |
| Hardware | ||
| Audio | No | |
| Cables Included | Yes | |
| KVM Ports | 2 | |
| Number of Monitors Supported | 2 | |
| PC Interface | USB | |
| PC Video Type | VGA | |
| Rack-Mountable | No | |
| Performance | ||
| IP Control | No | |
| Max Transfer Distance | 200 m (656 ft) | |
| Maximum Analog Resolutions | 1920x1200 | |
| MTBF | 65,000 hrs | |
| Supported Resolutions | 1920x1200 @ 650 ft (200m) | |
| Connector(s) | ||
| Console Interface(s) | 2 - USB Type-A (4 pin) USB 2.0 Female | |
| 2 - VGA (15 pin, High Density D-Sub) Female | ||
| Host Connectors | 2 - VGA (15 pin, High Density D-Sub) Female | |
| Other Interface(s) | 2 - RJ-45 Female | |
| Software | ||
| OS Compatibility | OS independent; No software or drivers required | |
| Special Notes / Requirements | ||
| Note | Product weights/measurements and connector types indicate a single unit only (either Host or Remote) | |
| Power | ||
| Center Tip Polarity | Positive | |
| Input Current | 0.2A | |
| Input Voltage | 110V-240V AC | |
| Output Current | 0.6A | |
| Output Voltage | 9 DC | |
| Plug Type | M | |
| Power Consumption (In Watts) | 5.4 | |
| Power Source | AC Adapter Included | |
| Environmental | ||
| Humidity | 0~80% RH | |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) | |
| Storage Temperature | -10°C to 60°C (14°F to 140°F) | |
| Physical Characteristics | ||
| Color | Black | |
| Enclosure Type | Steel | |
| Product Height | 40 mm [1.6 in] | |
| Product Length | 155 mm [6.1 in] | |
| Product Weight | 535 g [18.9 oz] | |
| Product Width | 80 mm [3.1 in] | |
| Packaging Information | ||
| Shipping (Package) Weight | 2.3 kg [5 lb] | |
| What's in the Box | ||
| Included in Package | 1 - local unit | |
| 1 - remote unit | ||
| 2 - 6 ft 2-in-1 USB VGA KVM cables | ||
| 1 - universal power adapter (NA/EU/UK/AU) | ||
| 8 - rubber feet | ||
| 1 - instruction manual | ||
No additional drivers or software required.
Certifications
Accessories
1,8m (6 ft.) Coax High Resolution Monitor VGA Video Cable - HD15 to HD15 M/M
Connect your VGA monitor with the highest quality connection available
10 ft Coax High Resolution VGA Monitor Cable HD15 M/M
Connect your VGA monitor with the highest quality connection available
15 ft Coax High Resolution Monitor VGA Cable - HD15 M/M
Connect your VGA monitor with the highest quality connection available
3m (10 ft) Ultra Thin USB VGA 2-in-1 KVM Cable
Connect VGA video and USB using a single thin KVM cable
4,5m (15 ft) 2-in-1 Ultra Thin USB KVM Cable
Connect VGA video and USB using a single thin KVM cable
1,8m (6 ft) 2-in-1 Ultra Thin USB KVM Cable
Connect VGA video and USB using a single thin KVM cable
Product Support
Drivers & Downloads
Manual(s):
-
SV565DUTPU.pdf
English
Compliance Letter(s):
Data Sheet(s)
- SV565DUTPU_Datasheet-EN-EU.pdf
English
Frequently Asked Questions
Before You Buy
This device outputs a VGA signal. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.
| Target connection | First conversion | Second conversion (if required) |
| DVI-D | VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. | HDMI to DVI-D: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. |
| DVI-I | VGA to DVI-I: https://www.startech.com/Cables/Audio-Video/Video-Adapter/DVIVGA/. | N/A |
| HDMI |
VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. |
N/A |
| DisplayPort | VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. | HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort. |
Note: You might need to use more than one converter as part of your solution; however, you should try to use the least number of converters and cables to connect your source and destination. If you have the option to convert to multiple target video connections, choose the option that requires the fewest number of conversions.
DVI-I and DVI-D
When you convert from VGA to DVI, you need to know if you are converting to a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you need, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.
You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.
Note: Certain devices may have a DVI-I connection but only support DVI-D signaling. It is important to verify that your DVI-I device supports DVI-I signaling.
This device has a VGA input port. If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.
|
Source connection |
Conversion |
|
DVI-I |
DVI-I to VGA: https://www.startech.com/DVIVGAMFBK. |
|
DVI-D |
DVI-D to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=DVI-D&filter_AVOUTPUT=VGA. |
|
HDMI |
HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA. |
|
DisplayPort |
DisplayPort to VGA: https://www.startech.com/AV/Displayport-Converters/DP-VGA/. |
DVI-I and DVI-D
When you convert from DVI to VGA, you need to know if you are converting from a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you have, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.
You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals. Some DVI-I connections only support DVI-D signaling. In this case, you must use a DVI-D to VGA converter.
