Cisco SFP-10G-SR Compatible 10GBase-SR SFP+ Fiber Transceiver Module 850nm MM LC w/DDM - 300m
Add, replace or upgrade SFP+ modules on 10G fiber equipment
Product ID: SFP10GSRST
- Maximum data rates up to 11.1Gbps
- Supports distances up to 300m (984ft)
- Complies with SFP Multi-Source Agreements standards (MSA)
- Compatible with Cisco equipment
- LC Fiber connector
- Fully Hot Pluggable
Overview
The SFP10GSRST Cisco® Compatible 10GBase-SR SFP+ Fiber Transceiver Module 850nm MM LC w/DDM - 300m (984ft) is built to comply with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to add, replace or upgrade a 10Gb SFP+ Multimode LC port on your fiber networking equipment or fiber media converter.
Supporting data rates up to 11.1 Gbps as well as Digital Diagnostics Monitoring (DDM), this LC SFP+/Mini-GBIC module can be installed into any fiber networking device with an MSA or Cisco compliant 10GbE SFP+ port. Delivering both convenience and scalability, this fiber transceiver is fully hot-pluggable, which enables you to install the module without interrupting network traffic or requiring a device reboot.
This 850nm multi-mode SFP+ module is compatible with the Cisco SFP-10G-SR transceiver.
Backed by a StarTech.com lifetime warranty and free lifetime technical support.
The StarTech.com Advantage
- Cost-effective replacement for MSA or Cisco compliant equipment
- Extend network connectivity up to 300m
Applications
Replacing defective or damaged SFP+ modules in 10Gb MSA compliant or Cisco equipment
Expand your network to remote segments
Technical Specifications
| Product Numbers | ||
|---|---|---|
| Ingram Micro France | V932281 | |
| Tech Data - France | 4631451 | |
| UPC Code | 065030850797 | |
| Warranty Information | ||
|---|---|---|
| Warranty | Lifetime | |
| Hardware | ||
| Compatible Brand | Cisco | |
| Industry Standards | IEEE 802.3ae 10GBASE-SR | |
| WDM | No | |
| Performance | ||
| Compatible Networks | 10 Gbps | |
| DDM | Yes | |
| Fiber Operating Mode | Full-Duplex | |
| Max Transfer Distance | 300 m (984 ft) | |
| Maximum Data Transfer Rate | 11.1 Gbps | |
| MTBF | 1,967,709 hours | |
| Type | Multi Mode | |
| Wavelength | 850nm | |
| Connector(s) | ||
| Local Unit Connectors | 1 - Fiber Optic LC Duplex Female | |
| Special Notes / Requirements | ||
| System and Cable Requirements | MSA or Cisco compliant SFP+ port | |
| Power | ||
| Power Consumption (In Watts) | > 1.2 W | |
| Environmental | ||
| Humidity | 30~70% RH | |
| Operating Temperature | 0°C to 70°C (32°F to 158°F) | |
| Storage Temperature | -40°C to 85°C (-40°F to 85°F) | |
| Physical Characteristics | ||
| Product Height | 10 mm [0.4 in] | |
| Product Length | 60 mm [2.4 in] | |
| Product Weight | 18 g [0.6 oz] | |
| Product Width | 12 mm [0.5 in] | |
| Packaging Information | ||
| Shipping (Package) Weight | 95 g [3.4 oz] | |
| What's in the Box | ||
| Included in Package | 1 - 10Gbps Multimode LC SFP+ Module | |
Certifications
Related Products
Cisco GLC-LH-SMD Compatible Gigabit Fiber SFP Transceiver Module SM LC w/ DDM - 20 km (Mini-GBIC)
Add, replace or upgrade SFP modules on Gigabit fiber equipment
Cisco GLC-FE-100FX Compatible 100 Mbps Fiber SFP Transceiver Module MM LC w/ DDM - 2 km (Mini-GBIC)
Add, replace or upgrade SFP modules on 100 Mbps fiber equipment
Cisco SFP-GE-S Compatible Gigabit Fiber SFP Transceiver Module MM LC w/ DDM - 550m (Mini-GBIC)
Add, replace or upgrade SFP modules on Gigabit fiber equipment
Accessories
2-Port 10G Fiber Network Card with Open SFP+ - PCIe, Intel Chip
Add two 10 Gigabit Fiber Ethernet ports (10 Gbps per port) to your server or workstation - using the SFP+ transceiver of your choice
PCI Express 10 Gigabit Ethernet Fiber Network Card w/ Open SFP+ - PCIe x4 10Gb NIC SFP+ Adapter
Scale your network performance using the 10Gb SFP+ transceiver of your choice and connect your PCIe-enabled server to a 10 Gigabit fiber network
1-Port 10G Open SFP+ Network Card - PCIe - Intel Chip - MM/SM
Get advanced connectivity over multimode or single-mode fiber, by adding a 10GBase-LR/SR open SFP+ port to your server or workstation
Fiber Optic Cable - 10 Gb Aqua - Multimode Duplex 50/125 - LSZH - LC/LC - 1 m
Deliver fast, reliable, data transfers, safely over high end networking equipment
Fiber Optic Cable - 10 Gb Aqua - Multimode Duplex 50/125 - LSZH - LC/LC - 2 m
Deliver fast, reliable, data transfers, safely, over high end networking equipment
Fiber Optic Cable - 10 Gb Aqua - Multimode Duplex 50/125 - LSZH - LC/LC - 3 m
Deliver fast, reliable, data transfers, safely over high end networking equipment
Fiber Optic Cable - 10 Gb Aqua - Multimode Duplex 50/125 - LSZH - LC/LC - 5 m
Deliver fast, reliable, data transfers, safely over high end networking equipment
Fiber Optic Cable - 10 Gb Aqua - Multimode Duplex 50/125 - LSZH - LC/LC - 10 m
Deliver fast, reliable, data transfers, safely over high end networking equipment
10 Gigabit Ethernet Copper-to-Fiber Media Converter - Open SFP+ - Managed
Convert and extend a high-speed, copper (10GBASE-T) connection over fiber (10GBASE-R), using the 10Gbe SFP+ transceiver of your choice
Product Support
Drivers & Downloads
Compliance Letter(s):
Data Sheet(s)
- SFP10GSRST_Datasheet.pdf
English
Frequently Asked Questions
Before You Buy
SFP fiber transceivers (mini-GBIC) are specific to applications and therefore, you need to select the correct fiber transceiver for your application. StarTech.com offers a few types of fiber transceivers: Cisco®, Cisco Meraki®, HP®, and Juniper® compatible, as well as standard gigabit SFP converters. Although the transceivers may be referred to as GBIC or mini-GBIC, the correct terminology for the device is small form-factor pluggable transceiver or SFP . StarTech.com does not carry GBIC converters.
If your device is not a Cisco device, it can still use Cisco compatible SFPs. Cisco SFPs are specifically coded to be compatible with Cisco devices. A standard SFP will not work in a Cisco device.
StarTech.com offers two different output connector types for SFPs: RJ-45 and fiber.
No special requirements are necessary to use RJ-45 SFPs. However, if you use fiber transceivers, the following items need to be the same as the interconnecting equipment:
-
The connector type, such as LC, SC, or ST.
-
The mode (single mode or multi mode).
-
The wavelength, such as 850 nm, 1310 nm, or 1550 nm.
-
The DDM support.
-
The speed, such as 10Gbps.
Note: The properties listed above cannot be converted or changed by a cable, excluding the connector type.
Follow us on Twitter | Find us on Google+