DisplayPort to HDMI Adapter - 4K
Connect your 4K HDMI display to a DP video source using this compact, passive adapter
Product ID: DP2HD4KADAP
- Astonishing picture quality four times the resolution of 1080p with support for 4K
- Maximum portability with a small footprint and lightweight design
- Hassle-free setup with plug-and-play installation
This DisplayPort™ to HDMI® adapter supports 4K video resolution, enabling you to connect DisplayPort devices, such as an Ultrabook™ or desktop computer, to a 4K HDMI display or projector.
Astonishing 4K picture quality
You will be amazed at how this adapter flawlessly manages your graphics-intensive content. With support for resolutions up to 4K - four times the resolution of high-definition 1080p - its lossless performance makes the adapter the ideal solution for high-resource applications such as graphic design, CAD & CAM design, or health care imaging (MRI, radiology diagnostics, etc.).
Plus, the 4K adapter supports 1080p displays, which makes it a great accessory for home, office or other workspace applications.
Arrive prepared, wherever you go
This DP to HDMI adapter is extremely portable, with a lightweight, small-footprint design. It’s the perfect accessory to carry with your Ultrabook, fitting easily into your laptop bag or carrying case. Its ultra-portable design makes the adapter ideal for BYOD (Bring Your Own Device) applications at the office, and enables you to arrive prepared when you’re presenting to a potential client, teaching off-site, or traveling to meet with a customer.
The DP2HD4KADAP is backed by a 3-year StarTech.com warranty and free lifetime technical support.
- Connect your 4K HDMI display to a DisplayPort output port
- Carry with your laptop for BYOD office applications
- Use an HDMI display as a secondary monitor for your DisplayPort computer
Ingram Micro Italy
Tech Data - Italy
|Active or Passive Adapter||Passive|
|AV Input||DisplayPort - 1.2|
|AV Output||HDMI - 1.4|
|Industry Standards||DPCP (DisplayPort Content Protection)
HDCP (High Definition Content Protection)
|Audio Specifications||HDMI - 7.1 Channel Audio|
|Maximum Cable Distance To Display||15.2 m [49.9 ft]|
|Maximum Digital Resolutions||3840x2160 30Hz (4K)|
|Supported Resolutions||3840x2160 30Hz (4K)
1920x1080 60Hz (1080p)
|Wide Screen Supported||Yes|
|Connector A||1 - DisplayPort (20 pin) Male Input|
|Connector B||1 - HDMI (19 pin) Female Output|
|Special Notes / Requirements|
|System and Cable Requirements||DP++ port (DisplayPort ++) required on video card or video source (DVI and HDMI pass-through must be supported)|
|Operating Temperature||0°C to 60°C (32°F to 140°F)|
|Storage Temperature||-10°C to 70°C (14°F to 158°F)|
|Product Height||1.1 cm [0.4 in]|
|Product Length||64 mm [2.5 in]|
|Product Width||21 mm [0.8 in]|
|Weight of Product||7.5 g [0.3 oz]|
|Package Height||26 mm [1 in]|
|Package Length||14.5 cm [5.7 in]|
|Package Width||98 mm [3.9 in]|
|Shipping (Package) Weight||36 g [1.3 oz]|
|What's in the Box|
|Included in Package||1 - DisplayPort to HDMI adapter|
DisplayPort to HDMI 4K Audio / Video Converter – DP 1.2 to HDMI Active Adapter for Desktop / Laptop Computers – 4K @ 30 Hz
Connect an HDMI monitor to a DisplayPort video source
Frequently Asked Questions
Before You Buy
Unfortunately no, this device has an intended source and an intended destination. Refer to the title of the webpage for this order.
When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.
If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.
Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.
Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.
Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.
If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.
Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters. For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.
If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).
Note: This issue does not apply to the Surface Pro 3 Docking Station.
If a DisplayPort converter with audio is not passing sound from the source to the destination, complete the following:
- Make sure that the DisplayPort connection on the video card is the default audio playback device.
- Make sure that the video card has the DisplayPort audio codec installed. If not, visit the video card manufacturer's website to find out how to update the video card driver.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.