2 Port Low Profile SATA to eSATA Plate Adapter
Add two eSATA ports to your PC, extended from internal Serial ATA connection ports
Product ID: ESATAPLT2LP
The ESATAPLT2LP 2 Port Low Profile SATA to eSATA plate adds external data support to any existing Serial ATA controller, adding two eSATA ports for connection to external SATA devices. With support for data transfer rates of up to 6Gbps, this external SATA plate allows you to take advantage of the increased data integrity provided by external hard drives or RAID devices that support eSATA connections.
The adapter plate can be mounted to the rear panel of the computer case, providing straightforward eSATA to SATA connections and allowing users to connect their eSATA devices (hard drive enclosures, etc.) to the provided eSATA ports which is an extension of the motherboard SATA data connectors.
Constructed of only top quality materials and designed for optimum performance, and reliability the ESATAPLT2LP is backed by our lifetime warranty.
The StarTech.com Advantage
- Enables you to connect two external eSATA devices to a low profile PC
- Adds two eSATA ports to your desktop, providing external, shielded connection ports on the back of your PC
- Backed by StarTech.com's lifetime warranty
Extend two SATA connections to a low profile plate, to enable connection of two eSATA storage devices
|Ingram Micro Italy||V931621|
|Tech Data - Italy||4863430|
|Cable Jacket Type||PVC - Polyvinyl Chloride|
|Type and Rate||SATA III (6 Gbps)|
|Connector A||1 - SATA (7 pin, Data) Receptacle|
|Connector B||2 - eSATA (7 pin, Data) Plug|
|Cable Length||304.8 mm [12 in]|
|Product Height||64 mm [2.5 in]|
|Product Length||300 mm [11.8 in]|
|Product Weight||44 g [1.6 oz]|
|Product Width||10 mm [0.4 in]|
|Wire Gauge||26 AWG|
|Shipping (Package) Weight||0 kg [0.1 lb]|
|What's in the Box|
|Included in Package||1 - 2 Port Low Profile SATA to eSATA Plate Adapter|
|1 - Reverse Notch Low Profile Bracket|
Frequently Asked Questions
When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Hard disk drive
Hard drive controller (for example, motherboard)
To test your setup components, try the following:
Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.
Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:
Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.
If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.
For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.