Productcode: MDP2HDMM2MW
Deze 2 m lange Mini DisplayPort™-naar-HDMI®-adapterkabel biedt een 1-kabelverbinding tussen uw mDP-MacBook of Ultrabook™ laptop en een HDMI-scherm of -projector. De passieve adapter ondersteunt videoresoluties tot Ultra HD 4K en is Thunderbolt™ compatibel, als hij direct wordt aangesloten op een ondersteunende DisplayPort over Thunderbolt I/O-poort.
Deze adapterkabel zorgt ervoor dat u een verbazingwekkende beeldkwaliteit kunt behouden, vier keer de resolutie van 1080p, bij de conversie van Mini DisplayPort naar HDMI.
De adapter is ook neerwaarts compatibel met schermen en videobronnen met lagere resoluties. Dankzij de ondersteuning van high-definition resoluties 1080p en 720p, is uw bestaande installatie ook in de toekomst klaar voor 4K video.
Voor de eenvoudigste en meest discrete installatie, kunt u deze mDP-naar-HDMI-adapter direct vanaf uw Mini DisplayPort-videobron aansluiten op de HDMI-poort van uw scherm. Hij heeft geen voeding nodig, in tegenstelling tot sommige converterdongles die actieve voeding en aparte videokabels nodig hebben.
Met zijn 2 m biedt deze adapterkabel een compacte aansluiting zonder kabelwarboel voor een nette, professionele installatie. Voor kortere verbindingen bieden wij ook een 1 m mDP-naar-HDMI-kabel (MDP2HDMM1MW), waardoor u de door u gewenste kabellengte kunt kiezen.
De MDP2HDMM2MW is een stijlvolle witte adapter die uitstekend past bij uw Mac-computer en wordt gedekt door een 3-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.
Warranty Information | Warranty | 3 Years |
---|---|---|
Connector(en) | 1 - Connector A | Mini-DisplayPort (20-polig) |
1 - Connector B | HDMI (19-polig) | |
Fysieke eigenschappen | Gewicht product | 77.4 g [2.7 oz] |
Kleur | Wit | |
Kabellengte | 2 m [6.6 ft] | |
Lengte product | 2.0 m [6.6 ft] | |
Breedte product | 41.0 mm [1.6 in] | |
Hoogte product | 15.0 mm [0.6 in] | |
Gebruiksomgeving | Bedrijfstemperatuur | 0°C to 70°C (32°F to 158°F) |
Opslagtemperatuur | -10°C to 70°C (14°F to 158°F) | |
Vochtigheid | 10%-85% | |
Hardware | Active or Passive Adapter | Passief |
AV-ingang | Mini DisplayPort - 1.2 | |
AV-uitgang | HDMI - 1.4 | |
Audio | Ja | |
Industriestandaarden | DPCP (DisplayPort Content Protection) HDCP (High Definition Content Protection) DisplayPort 1.2 HDMI 1.4 |
|
Prestaties | Audiospecificaties | HDMI - 7.1 Channel Audio |
Maximale digitale resoluties | 4K x 2K @ 30 Hz | |
Ondersteunde resoluties | 4k x 2K (Ultra HD) 1920x1200 1920x1080 (1080p) 1280x720 (720p) |
|
Ondersteuning breedbeeld: | Ja | |
MTBF | 2,183,131 uren | |
Verpakkingsinformatie | Verzendgewicht (verpakt) | 120.0 g [4.2 oz] |
Package Length | 100.0 cm [39.4 in] | |
Package Width | 41.0 mm [1.6 in] | |
Package Height | 15.0 mm [0.6 in] | |
Wat wordt er meegeleverd | 1 - Meegeleverd | mDP-naar-HDMI-adapterkabel |
Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)If a DisplayPort converter with audio is not passing sound from the source to the destination, complete the following:
When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.
If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.
Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.
Passive Adapters
Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.
Active Adapters
Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.
If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.
Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters. For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.
Surface Dock
If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).
Note: This issue does not apply to the Surface Pro 3 Docking Station.