Slimline SATA to SATA Adapter with SP4 Power - Screw Mount
Connect a Slimline SATA optical drive to a standard SATA motherboard connection.
Product ID: SLSATACDADAP
This cost-saving Slimline SATA to SATA adapter lets you connect a Slimline SATA optical drive to a standard SATA motherboard connection.
The adapter features a Slimline SATA connector on one side and a standard SATA data connector on the other; power is drawn through a power supply floppy drive (SP4) connector, combining both data and power into the optical drive Slimline SATA connection.
The adapter features a PCB-mounted design that can be securely fastened to the optical drive, eliminating loose connections.
The Slimline SATA to Standard SATA adapter is backed by Lifetime Warranty and free lifetime technical support.
The StarTech.com Advantage
- Cost-effective way to connect a slimline optical drive to a regular SATA data cable and floppy drive power cable
- Easy to use and install
- Backed by StarTech.com's lifetime warranty
|Ingram Micro Netherlands||1603574|
|Connector Type(s)||1 - SATA (7 pin, Data) Plug|
|1 - Slimline SATA (13 pin, Data & Power) Receptacle|
|1 - SP4 (4 pin, Small Drive Power) Male|
|Product Weight||5.5 g [0.2 oz]|
|Shipping (Package) Weight||0.1 kg [0.1 lb]|
|What's in the Box|
|Included in Package||1 - Slimline SATA to SATA Adapter with SP4 Power - Screw Mount|
Frequently Asked Questions
When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Hard disk drive
Hard drive controller (for example, motherboard)
To test your setup components, try the following:
Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.
Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:
Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.
If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.
For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
* Product appearance and specifications are subject to change without notice.