SATA Dual Hard Drive RAID Adapter - Internal SATA Connector to Dual SATA HDD RAID Controller Card

Connect two SATA Hard Drives to a single internal SATA connection, and build a RAID array for accelerated performance or secure data redundancy

Product ID: S322SAT3R

  • Add dual drive RAID support to a single internal SATA connector
  • Hardware RAID supporting RAID 0 / RAID 1 / BIG / JBOD
  • Compatible with SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives
View More
  • Space-saving design, mounts directly to your drive
  • No software or drivers required
  • 2 SATA cables included for hassle-free installation
28,99 € EUR exc VAT
35,08 € EUR inc VAT
In stock with partners:
Where To Buy


The S322SAT3R internal drive-mounted SATA RAID adapter lets you connect two SATA hard drives to a single SATA connector on your motherboard, and build a hardware RAID array.

This versatile RAID adapter features a built-in hardware RAID controller, supporting JBOD, BIG, RAID 0,  and RAID 1 -- to achieve greater drive capacity, secure data redundancy or improved system performance.

With two included SATA cables you'll have everything you need to ensure a hassle-free installation. This plug-and-play HDD adapter is easy to install, mounting directly to your drive without any additional hardware or software installation.

To maximize performance and utilize the full speed potential of your SATA III hard drives, this HDD RAID controller supports SATA III for transfer speeds up to 6 Gbps when paired with a compatible controller.

The S322SAT3R is backed by a 2-year warranty and free lifetime technical support.

The Advantage

  • Achieve greater drive capacity, secure data redundancy or improved system performance with support for RAID 0 / RAID 1 / BIG / JBOD
  • Hassle-free installation with drive mounted controller, included SATA cables and no software or drivers required
  • Maximize performance with file transfer speeds up to 6Gbps when paired with a SATA III HDD and controller


Add data redundancy to your computer with a mirrored (RAID 1) RAID array

Increase the capacity of your computer system by adding an additional HDD in a RAID array (BIG) using the same single SATA connector as your existing drive

Increase system performance by internally adding a dual drive RAID 0 array to a single SATA connector

Add additional hard drives in a computer with limited SATA connectors

Technical Specifications

Warranty Information
Warranty 2 Years
Chipset ID JMicron - JMS562
Compatible Drive Types SATA
Drive Installation Fixed
Interface SATA
Number of Drives 2
General Specifications For JBOD mode, your SATA controller must support Port Multiplier
Hot Swap Capability No
Max Drive Capacity Currently tested with up to 4TB 7200 RPM hard drives
Maximum Data Transfer Rate 6 Gbps
Port Multiplier Yes
Supported RAID Modes BIG (Spanning or Concatenation)
JBOD - (Just a Bunch of Disks)
RAID 0 (Striped Disks)
RAID 1 (Mirrored Disks)
Type and Rate SATA III (6 Gbps)
Drive Connectors 2 - SATA (7 pin, Data) Plug
Host Connectors 1 - SATA Data & Power Combo (7+15 pin) Receptacle
OS Compatibility OS independent; No software or drivers required
Humidity Operating 20% to 80%
Non Operating 15% to 90%
Operating Temperature 5°C - 50°C (41°C to 122°C)
Storage Temperature -25°C - 70°C (-13°C to 158°C)
Physical Characteristics
Product Height 23 mm [0.9 in]
Product Length 75 mm [3 in]
Product Weight 11.8 g [0.4 oz]
Product Width 26 mm [1 in]
Packaging Information
Shipping (Package) Weight 120 g [4.2 oz]
What's in the Box
Included in Package 1 - Internal Drive Mounted Dual SATA Hard Drive RAID Adapter
2 - SATA Cables (50cm)
1 - LP4 to SATA Power Adapter
1 - Installation Guide
Ports 2
Supports any operating system.
No additional drivers or software required.


Related Products

Dual mSATA SSD to 2.5” SATA RAID Adapter Converter
Dual mSATA SSD to 2.5” SATA RAID Adapter Converter

Build a RAID array with two mSATA SSDs that can be installed into a single 2.5in SATA bay

63,99 € exc VAT
77,43 € inc VAT