8-Port Gigabit Ethernet Switch - Managed - Wall Mount with Front Access
Connect up to 8 different GbE devices using this IP30 industrial Ethernet switch with intelligent Layer 2 management
Product ID: IES81GW
- Expand your network with 8x RJ45 ports in one convenient Gigabit network switch
- Rugged IP30 industrial design with metal housing and extended temperature range (-40° to +75° C)
- Wall mountable with front access, or DIN-rail mountable (magnetic mounts)
- Layer 2 management capabilities, for improved network control, efficiency, and stability
- Compatible with 10/100/1000Mbps networks
- Redundant power design (terminal block/DC plug)
- IPv4 and IPv6 dual stack management
- IGMP and MLD support
- Supports link aggregation, VLAN tagging, spanning tree protocol, port-based network access control
Not Available
May be in stock with partners
From a Partner
Support
Overview
Easily deploy or scale your network with this Gigabit Ethernet switch, adding eight copper Gigabit Ethernet (GbE) connections. This IP30 industrial network switch provides intelligent Layer 2 management. Its rugged, compact design and wall-mount option with front access make it ideal for demanding applications, even where space is limited.
Expand your network
This GbE switch lets you expand your network by connecting up to eight RJ45 devices. The 8-Port switch enables up to eight users to share files and devices, such as printers and scanners, over a LAN connection, by enhancing your existing network capacity with additional ports.
Wall-mountable with front access
With its compact design, you can wall-mount the Gigabit switch to provide convenient front access to ports and indicators. It’s ideal for a wide range of applications, including tight installation areas with significant electromagnetic interference, such as control cabinets and panels. The network switch is also DIN-rail mountable.
Efficient Layer 2 management
The scalable switch delivers efficient and stable performance, with Layer 2 management capabilities. This lets you control packet traffic on a busy network, and customize your settings to achieve optimal network performance, offering improved efficiency and reliability.
Rugged industrial design
This rugged network switch features an IP30-rated metal housing and extended operating temperature range of -40°C to 75°C, which makes it ideal for a wide range of conditions. The sturdy metal enclosure offers durability, even in harsh industrial environments.
Reliable connection for seamless network performance
With support for 10/100/1000Mbps transfer speeds, this managed switch supports full/half-duplex auto-negotiation, jumbo frames, and auto MDI/MDIX operation. This lets you connect your network devices quickly and easily, with little to no configuration required.
To help prevent any unnecessary downtime, the switch features redundant 12-58V DC terminal block power inputs, which ensures seamless operation in the event of power dips or failures.
The IES81GW is backed by a StarTech.com 2-year warranty and free lifetime technical support.
Applications
Install in a server rack or cabinet or wall mount in a convenient location
An ideal solution for many network applications including IP surveillance, wireless LAN, building/home automation network and Internet of things (IoT)
Add small workgroups to expand your existing network in a business or home office
Works well in industrial, non-climate controlled environments, such as warehouses
Technical Specifications
| Product Numbers | ||
|---|---|---|
| Ingram Micro New Zealand | 3663079 | |
| UPC Code | 065030868457 | |
| Warranty Information | ||
|---|---|---|
| Warranty | 2 Years | |
| Hardware | ||
| Industry Standards | IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-TX, IEEE 802.3x Flow Control | |
| Ports | 8 | |
| Performance | ||
| Auto MDIX | Yes | |
| Buffer Size | 512 KB | |
| Compatible Networks | 10/100/1000 Mbps | |
| Flow Control | IEEE 802.3x pause frame for full-duplex, back pressure for half-duplex | |
| Full Duplex Support | Yes | |
| Jumbo Frame Support | 9K max. | |
| Maximum Cable Length | 328 ft [100 m] | |
| Maximum Data Transfer Rate | 2 Gbps (Full-Duplex) | |
| MTBF | > 100,000 hrs @ 25 degrees C | |
| Supported Protocols | IEEE 802.3ad Port Trunk with LACP, IEEE 802.1D Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol, IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1p Class of Service, RFC 3810 MLD version 2, RFC 792 ICMP, RFC 2068 HTTP, RFC 1112 IGMP version 1, RFC 2236 IGMP version 2, RFC 3376 IGMP version 3, RFC 2710 MLD version 1, IEEE 802.1Q VLAN Tagging, IEEE 802.1x Port Authentication Network Control, bIEEE 802.1ab LLDP, RFC 768 UDP, RFC 793 TFTP, RFC 791 IP | |
| Surge Protection | 6kV ESD, 6kV EFT | |
| Switching Architecture | Store-and-Forward | |
| Connector(s) | ||
| Connector Type(s) | 8 - RJ-45 Female | |
| 1 - Terminal Block (3 Wire) Male | ||
| Software | ||
| OS Compatibility | OS Independent; No additional drivers or software required | |
| Indicators | ||
| LED Indicators | 1 - Power | |
| 8 - 10/100 Mbps and Link/Activity (yellow) 1000 Mbps and Link/Activity (green) |
||
| Power | ||
| Center Tip Polarity | Positive | |
| Input Voltage | 12 ~ 48 DC | |
| Output Current | 1.5A | |
| Output Voltage | 12 DC | |
| Plug Type | M | |
| Power Source | AC Adapter Included | |
| Environmental | ||
| Humidity | 5~95% RH (Non-Condensing) | |
| Operating Temperature | -40°C to 75°C (-40°F to 167°F) | |
| Storage Temperature | -40°C to 90°C (-40°F to 194°F) | |
| Physical Characteristics | ||
| Color | Black | |
| Enclosure Type | Steel | |
| Product Height | 1 in [25 mm] | |
| Product Length | 5.3 in [134 mm] | |
| Product Weight | 17.3 oz [490 g] | |
| Product Width | 5.8 in [148 mm] | |
| Packaging Information | ||
| Shipping (Package) Weight | 2.1 lb [1 kg] | |
| What's in the Box | ||
| Included in Package | 1 - network switch | |
| 1 - universal power adapter (NA/JP, UK, EU, ANZ) | ||
| 1 - terminal block connector | ||
| 4 - screw anchors | ||
| 4 - screws | ||
| 4 - attaching pins | ||
| 4 - locking clips | ||
| 4 - washers | ||
| 4 - magnets | ||
| 1 - DIN rail | ||
| 3 - DIN-rail screws | ||
| 8 - dust caps | ||
| 1 - quick-start guide | ||
No additional drivers or software required.
Certifications
Related Products
8-Port (4 PoE+) Gigabit Ethernet Switch - Managed - Wall Mount with Front Access
Connect up to 8 different GbE (4 PoE+) devices, using this IP30 industrial Ethernet switch with intelligent Layer 2 management
8-Port Gigabit Ethernet Switch - Managed - Wall Mount with Front Access
Connect up to 8 different GbE devices using this IP30 industrial Ethernet switch with intelligent Layer 2 management
8-Port Gigabit Ethernet Switch with 2 SFP Connections - Managed - Wall Mount with Front Access
Add up to 10 GbE devices to your network, using 8 RJ45 and 2 fiber-optic connections, with intelligent Layer 2 management support
8 Port Unmanaged Industrial Gigabit Power over Ethernet Switch - 802.3af/at PoE+ Switch - Wall Mountable
Connect power and Gigabit Ethernet data to 8 PoE-enabled devices, with 30W per-port output - Wall Mountable
8-Port PoE+ Gigabit Ethernet Switch plus 2 SFP Connections - Managed - Wall Mount with Front Access
Add up to 10 different GbE devices to your network, using 8 RJ45 (PoE+) and 2 fiber-optic connections, with intelligent Layer 2 management
Accessories
Cat6 Patch Cable with Molded RJ45 Connectors - 6 ft. - Black
Make Power-over-Ethernet-capable Gigabit network connections
Product Support
Drivers & Downloads
Frequently Asked Questions
Troubleshooting
This device's default static IP address is 192.168.0.100.
- Make sure that the IES81GW is on the same network as your computer.
- In an Internet browser, enter the IP address of the unit. The default IP address is 192.168.0.100.
- In the user name field, enter the user name. The default user name is admin.
- In the password field, enter the password. The default password is admin.
Follow us on Twitter | Find us on Google+