StarTech.com

HDMI till kompositkonverterare med audio

Konvertera en HDMI®-signal och bifogat ljud så att det fungerar med äldre kompositvideo-TV-apparater och -skärmar

Produkt ID: HD2VID

  • Konverterar HDMI®-källa till NTSC eller PAL
  • Konverterar HDMI-ljud till analogt RCA-stereoljud
  • Stödjer HDTV-indataupplösningar upp till 720p (PC-datorer upp till 1280x800)
Visa mer
  • Utdata bildstorlek överskanning/underskanning
  • Anpassningsbar kontrastförbättring
  • Stödjer utdataupplösningar på 480i/576p
219,99 € EUR exkl. moms
274,99 € EUR inkl. moms

Överblick

HD2VID HDMI® till kompositvideokonverteraren (med ljud) omvandlar en HDMI-videokälla (med bifogat ljud) så att det fungerar med analoga kompositvideo-TV-apparater och skärmar i både NTSC- och PAL-system.

HDMI till kompositkonverteraren har funktioner som säkerställer högsta kvalitet på utdatabilden, som brusreducering och bildfrekvenskonvertering och en lättanvänd skärmvisning som gör att du kan kontrollera skärmstatusen. Denna mångsidiga HDMI-konverterare med stöd för flera olika HDTV- och PC-indataupplösningar är den perfekta lösningen för att koppla ihop nyare enheter med befintliga äldre skärmar.

Täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Fördelarna med StarTech.com

  • Möjligheten att konvertera HDMI®-indata så att den går att använda med äldre TV-apparater ger flexibilitet och sparar kostnader för att uppgradera hårdvara
  • Snabb och enkel integrering i din A/V-miljö tack vare liten formfaktor och enkel plug-and-play-installation
  • Stöd för flera olika HDTV- och PC-indataupplösningar ger kompatibilitet med i stort sett alla källenheter

Användning

Idealisk för att konvertera nyare HDMI-enheter så att de fungerar med äldre komposit- eller S-video-TV-apparater

Perfekt för föredrag, mässor, konferenser inom handel, nöjesbranschen och hemmavideo

Tekniska specifikationer

Information om garanti
Garanti 2 Years
Hårdvara
Active or Passive Adapter Aktiv
Audio Ja
AV-ingång HDMI
AV-utgång Audio RCA
Composite
Industristandarder Standard HDMI, DVI 1.0
Prestanda
Audio-specifikationer Indata - LPCM 2Ch, 48k Hz
Utdata - stereo h/v
Stödda upplösningar Input
TV - 720p, 576p, 480p @ 60Hz
PC - 1280x800, 1280x768, 1224x768, 800x600, 640x480 @ 60Hz
Output
480i, 576p
Kontakt(er)
Connector A 1 - HDMI (19-stifts) Hona Input
Connector B 1 - Kompositvideo (1 x RCA) Hona Output
1 - Stereoaudio (2 x RCA) Hona Output
Ström
Inspänning 110V-240V AC
Inström 0.3 A
Kontakttyp M
Polaritet på mittpol Positiv
Power Source AC-adapter medföljer
Strömförbrukning 3
Utspänning 5 DC
Utström 1A
Miljö
Drifttemperatur 0°C to 40°C (32°F to 104°F)
Förvaringstemperatur -20°C to 60°C (-4°F to 140°F)
Luftfuktighet 20~90 % RH
Utseende
Färg Vit
Kabinettyp Av plast
Produktbredd 64 mm [2.5 in]
Produkthöjd 26 mm [1 in]
Produktlängd 100 mm [3.9 in]
Produktvikt 90 g [3.2 oz]
Förpackning
Fraktvikt (förpackning) 0.3 kg [0.7 lb]
Vad det är i lådan
Ingår i paketet 1 - HDMI® till kompositkonverterare
1 - Universell strömadapter (NA/UK/EU/AU)
1 - Instruktionsbok

Certifikat

Relaterade produkter

Composite and S-Video to VGA Video Converter
VID2VGATV
Composite and S-Video to VGA Video Converter

Convert and scale a composite or S-Video signal to work with a VGA monitor

277,99 € exkl. moms
347,49 € inkl. moms
Högupplöst VGA till kompositvideo (RCA) eller S-video-konverterare - PC till TV
VGA2VID
Högupplöst VGA till kompositvideo (RCA) eller S-video-konverterare - PC till TV

Anslut en PC med VGA-utgång till en TV med kompositvideo eller S-video

133,99 € exkl. moms
167,49 € inkl. moms
HDMI till VGA-videoadapter med audio – HD till VGA-skärm 1080p
HDMI2VGA
HDMI till VGA-videoadapter med audio – HD till VGA-skärm 1080p

Anslut HDMI®-enheter till en VGA-skärm med stereoljudsseparering

247,99 € exkl. moms
309,99 € inkl. moms

Produktsupport

Drivrutiner & hämtningsbara filer

Vanliga frågor

Before You Buy

Unfortunately no, this device has an intended source and an intended destination.  Refer to the title of the webpage for this order.

This is an active video signal converter.  

A passive video signal converter changes the type of connection that is being used but does not change the signal that passes through the converter. Because the video signal is not modified, passive converters tend to be smaller, simpler, and less expensive than active video signal converters. Examples of passive converters include DVI-I to VGA, HDMI to DVI, and DisplayPort to Mini-DisplayPort converters.

An active video signal converter modifies both the type of connection that is being used and the signal that passes through the converter. Because this type of conversion can be complex, active converters tend to be larger than passive video signal converters and sometimes require additional power. Examples of active converters include DVI-D to VGA, HDMI to DisplayPort, and VGA to HDMI converters.

For more information about passive and active DisplayPort video signal converters, refer to the following FAQ: https://www.startech.com/faq/DisplayPort_Converter_DP_Multi_Mode.

For more information about which type of video signal converter you should use when you convert video signals with an MST hub, refer to the following FAQ: https://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Installation

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Problemsökning

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

This is likely a High-bandwidth Digital Content Protection (HDCP) issue. If you are converting a video signal from a device that can play copyright-protected content, HDCP will block the conversion to an analog signal (for example, VGA) or to any video capture cards.

You will likely run into this issue when you use devices like Blu-ray players, DVD players, and certain gaming consoles. For more information on HDCP and gaming consoles, refer to the following FAQ: https://www.startech.com/faq/video_capture_cards_video_game_console_compatibility.

Some video cards also output an HDCP signal full time. In this case there should be an option for your video card to disable this feature. You might need to contact the manufacturer of your video card for more information.

Adhering to HDCP is required for converting all digital signals to analog signals or to video capture cards. Unfortunately, there is nothing you can do in these situations other than convert to a digital display.