StarTech.com

Thunderbolt 3 till dubbel HDMI-adapter - 4k 30 Hz - endast kompatibel med Windows

Använd en Thunderbolt 3-port på ditt Windows-system för att köra resurskrävande program på två UHD 4K-skärmar

Produkt ID: TB32HD2

  • Anslut två UHD 4K-skärmar till din dator genom en enda Thunderbolt 3-port.
  • Kör resurskrävande program på 4K-skärmar vid 30 Hz utan att tömma systemets resurser
  • Thunderbolt-certifierad
Visa mer
  • Bakåtkompatibel med lägre upplösningar som HD-upplösningarna 1920x1200 och 1080p
  • Ingen extern strömadapter behövs
139,99 € EUR exkl. moms
174,99 € EUR inkl. moms

Överblick

Med denna högpresterande Thunderbolt™ 3-adapter kan du lägga till två 4K HDMI-skärmar till en dator genom en enda Thunderbolt 3-port (USB-C™). Thunderbolt-videoadaptern är kompatibel med datorsystem som stöder Thunderbolt 3, som till exempel modeller av Dell™ Precision och Dell XPS.

Thunderbolt 3-logotyp

Multitaska med högsta upplösning

Diagram över Thunderbolt 3 till DisplayPort-adapter med två skärmar

Thunderbolt 3 låter dig använda en enda port på din bärbara dator för att sända dubbel 4K-upplösning till två oberoende skärmar. Denna prestanda gör att du kan köra de allra mest resurskrävande programmen på två separata skärmar. Du kan sända oberoende innehåll till varje skärm med upplösningar på upp till 4096x2160p @ 30 Hz, vilket är perfekt för att redigera 4K-video eller för att utföra andra Ultra HD-uppgifter som till exempel skapa CAD-ritningar eller granska medicinska bilder.

Stöder dubbla 4K-skärmar för effektivare arbete.

Adaptern fungerar som en extern grafikadapter med 2 portar och audiostöd och är ett kompakt och behändigt alternativ till en dockningsstation för bärbara datorer när du inte behöver alla funktioner från en dockningsstation.

Med två UHD 4K-skärmar kan du arbeta effektivare från din bärbara dator, såsom din Dell Precision, så att du kan få mer gjort under lika lång tid. Och eftersom varje skärm ger 4K-prestanda kan du ha fyra gånger större skärmyta jämfört med 1080p. Kreativa proffs kan vara produktivare med friheten att redigera 4K-video på en skärm och samtidigt granska rå videouppspelning på den andra 4K-skärmen.

Tömmer inte systemets resurser

Diagram över Thunderbolt 3 till DisplayPort-adapter med en skärm

Adaptern hjälper till att hålla systemet på topprestanda. Till skillnad från externa USB-videolösningar låter Thunderbolt 3 dig välja Ultra HD 4K-upplösning vid 30Hz på båda skärmarna utan att tömma systemets resurser.

Eftersom den är bakåtkompatibel med dina 1080p HD-skärmar är den ett perfekt tillbehör för hemmet, kontoret eller andra skrivbordsmiljöer.

TB32HD2 täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Läs mer om Thunderbolt

Din dators Thunderbolt 3-portar kanske inte fungerar korrekt förrän du har uppdaterat en eller flera av följande på din dator:

  • BIOS
  • Inbyggd Thunderbolt-programvara
  • Drivrutiner för Thunderbolt 3-kontroller
  • Thunderbolt 3-mjukvara

Vilka uppdateringar som behövs beror på din dator.

För en uppdaterad lista över påverkade datorer och instruktioner, se http://thunderbolttechnology.net/updates. Om din tillverkare inte är listad på Thunderbolt-webbplatsen, kontakta din tillverkare.

Användning

Anslut din dator till två 4K-skärmar.

Skapa högupplöst, grafiskt krävande innehåll såsom CAD-ritningar och Photoshop-bilder.

Skapa och redigera 4K-video samtidigt som du använder resurskrävande mjukvara.

Multitaska genom att förhandsvisa rå utdata på en andra 4K-skärm.

Anslut till olika system med 4K- eller 1080p-skärmar för hoteling (hot desking) vid BYOD-situationer.

Använd en skärm för referensmaterial, som till exempel webbplatser, samtidigt som du skapar 4K-innehåll på din andra skärm

Visa ett kalkylblad eller arbetsblad över flera skärmar för att slippa skrolla

Få panoramavisningar som är inbyggda i program samtidigt som du visar hjälpsamt undervisningsinnehåll på skärmen på din bärbara dator

Anslut din Dell XPS eller Dell Precision till två externa DP-skärmar

Tekniska specifikationer

Information om garanti
Garanti 2 Years
Hårdvara
Active or Passive Adapter Aktiv
Audio Ja
AV-ingång Thunderbolt™ 3 USB-C (24-pin)
AV-utgång HDMI
Prestanda
Maximal dataöverföringshastighet 20 Gbps
Maximal digital upplösning 4K @ 30 Hz
Stödda upplösningar 3840x2160
2560x1600
1920x1200
1920x1080
1280x720
Kontakt(er)
Connector A 1 - Thunderbolt™ 3 USB-C (24-pin) Hane Output
Connector B 2 - HDMI (19-stifts) Hona Output
Mjukvara
OS-kompatibilitet Microsoft Windows® 10, 8/8.1
Utseende
Produktbredd 60 mm [2.4 in]
Produkthöjd 16 mm [0.6 in]
Produktlängd 114 mm [4.5 in]
Produktvikt 103 g [3.6 oz]
Förpackning
Fraktvikt (förpackning) 0.2 kg [0.5 lb]
Vad det är i lådan
Ingår i paketet 1 - Thunderbolt 3 till dubbel HDMI-adapter
Typ och hastighet Thunderbolt 3 - 40 Gbit/s

Kompatibilitet

Se alla kompatibla operativsystem
Microsoft Windows® 10, 8/8.1

Certifikat

Relaterade produkter

Thunderbolt 3 till dubbel DisplayPort-adapter - 4K 60 Hz - endast kompatibel med Windows
TB32DP2
Thunderbolt 3 till dubbel DisplayPort-adapter - 4K 60 Hz - endast kompatibel med Windows

Använd en Thunderbolt 3-port på ditt Windows-system för att köra resurskrävande program på två UHD 4K-skärmar, eller en 5K-skärm

119,99 € exkl. moms
149,99 € inkl. moms
Thunderbolt 3 till dubbel DisplayPort-adapter - 4K 60Hz - kompatibel med Mac och Windows
TB32DP2T
Thunderbolt 3 till dubbel DisplayPort-adapter - 4K 60Hz - kompatibel med Mac och Windows

Kör de mest resurskrävande programmen på två 4K 60Hz-skärmar med din Mac eller PC

127,99 € exkl. moms
159,99 € inkl. moms
USB-C till HDMI-flerskärmsadapter - MST-hubb med 2 portar
MSTCDP122HD
USB-C till HDMI-flerskärmsadapter - MST-hubb med 2 portar

Anslut två oberoende skärmar till en enda USB Type-C-port

114,99 € exkl. moms
143,74 € inkl. moms
USB C DisplayPort-adapter - 3 portar - USB C till DisplayPort MST-hubb - USB Type C skärmhubb
MSTCDP123DP
USB C DisplayPort-adapter - 3 portar - USB C till DisplayPort MST-hubb - USB Type C skärmhubb

Använd denna adapter för att ansluta tre oberoende skärmar till en enda USB Type-C-port

163,99 € exkl. moms
204,99 € inkl. moms
USB-C till DisplayPort-flerskärmsadapter - MST-hubb med 2 portar
MSTCDP122DP
USB-C till DisplayPort-flerskärmsadapter - MST-hubb med 2 portar

Använd denna adapter för att ansluta två oberoende skärmar till en enda USB Type-C-port

105,99 € exkl. moms
132,49 € inkl. moms

Tillbehör

Produktsupport

Drivrutiner & hämtningsbara filer

Manual(er):
Specifikation(er)
Stödmaterial:
  • Thunderbolt 3_insert_rev2.pdf

    IMPORTANT
    Your computer’s Thunderbolt 3 ports might not function properly until you update one or more of the following on your computer:

    • - BIOS
    • - Thunderbolt firmware
    • - Thunderbolt 3 controller drivers
    • - Thunderbolt 3 software

    The required updates will vary depending on your computer.

    For an up-to-date-list of affected computers and instructions, visit https://thunderbolttechnology.net/updates. If your manufacturer isn’t listed on the Thunderbolt website, contact your manufacturer.

Vanliga frågor

Before You Buy

Components

Thunderbolt™ 3 is the latest version of the Thunderbolt standard for connecting computers and electronic devices. It is capable of the following:

  • Total bandwidth up to 40Gbps. Data transfer speeds are dependent on the other features that you are using in your setup.
  • USB 3.1 Gen 2 support.
  • 4K 60Hz video on one or two separate displays.
  • 5K 60Hz video on a single display.
  • A 10 GbE network connection between two Thunderbolt 3 compatible computers.
  • Up to six devices daisy-chained from a single Thunderbolt 3 port.
  • Alternate modes, such as DisplayPort Alternate Mode (DP Alt Mode).
  • Bi-directional power delivery up to 100W (not all Thunderbolt 3 devices support power delivery).

USB-C and Thunderbolt 3

Thunderbolt 3 uses the USB-C connector, but not all host connections, cables, and devices with a USB-C connector support Thunderbolt 3. This means that a USB-C device is compatible with a Thunderbolt 3 host connection, but a Thunderbolt 3 device is not compatible with a USB-C host connection. Therefore, it is important to know whether you have a USB-C or a Thunderbolt 3 host, cable, or device.

To determine if your component is a Thunderbolt 3 device, look for the Thunderbolt 3 symbol (shown below). USB-C devices do not include this symbol.  For more information about USB-C, see the following FAQ: https://www.startech.com/faq/usb-c-port-capabilites.

Thunderbolt symbol: https://sgcdn.startech.com/005329/media/products/gallery_large/TBLT3MMXM.B.jpg.

Backwards compatibility

If you use an adapter, Thunderbolt 3 host connections are compatible with Thunderbolt 1 and Thunderbolt 2 devices. You can use the StarTech.com TBT3TBTADAP to make a Thunderbolt 3 host connections backwards compatible.

Thunderbolt 3 devices are not backwards compatible with Thunderbolt 1 and Thunderbolt 2 host connections.

Thunderbolt 3 uses the USB-C connector, but not all host connections, cables, and devices with a USB-C connector support Thunderbolt 3. This means that a USB-C device is compatible with a Thunderbolt 3 host connection, but a Thunderbolt 3 device is not compatible with a USB-C host connection. Therefore, it is important to know whether you have a USB-C or a Thunderbolt 3 host, cable, or device.

To determine if your component is a Thunderbolt 3 device, look for the Thunderbolt 3 symbol (shown below). USB-C devices do not include this symbol.  For more information about USB-C, see the following FAQ: http://www.startech.com/faq/usb-c-port-capabilites.

Thunderbolt symbol: https://sgcdn.startech.com/005329/media/products/gallery_large/TBLT3MMXM.B.jpg.

No, you cannot use this device to increase the maximum number of displays that a video card supports. For example, if your video card only supports up to three displays and you add this device to your setup, your display limit is still three displays.

If you have connected more than one of this device to the same computer and are experiencing display issues, you should make sure that your video card can support the number of displays that you are using in your setup.

This device requires that the Thunderbolt 3 host system provides 15W of bus power to the Thunderbolt 3 port. Thunderbolt 3 host systems that do not provide the full 15W of bus power will not work with this device.  

Refer to the information provided by the manufacturer to confirm the power delivery capabilities of your host system.

Hur man

To check which version of the Thunderbolt™ software, NVM firmware, and drivers you are running, do the following:

  1. Click Start.
  2. Type Thunderbolt and click on the search result.
  3. In the system tray, right-click the Thunderbolt icon.
  4. Click Settings > Details.

Review the versions of the software package, NVM firmware, PD firmware, and drivers.  If you are not running the latest versions, navigate to the manufacturer’s website and download the latest versions. 

When you connect a Thunderbolt™ device to any Windows operating system that can support Thunderbolt 3, a pop-up message appears. To use your device, complete the following:

  1. In the New Thunderbolt devices have been attached pop-up message, click OK.
  2. In the User Account Control pop-up message, click Yes.
  3. In the Approve Thunderbolt Devices pop-up message, do one of the following:
    • If you want to authorize your Thunderbolt devices every time that you connect them, select Connect Only Once in the drop-down list.
    • If you want to authorize your Thunderbolt devices only once, select Always Connect in the drop-down list.
  4. Click OK.

If you accidentally set your Thunderbolt device to Do Not Connect in step three above, refer to the following FAQ: https://www.startech.com/faq/thunderbolt-3-denied-authentication.

If you accidentally set a Thunderbolt™3 device to not connect to your computer when prompted by the system, you can force the software to prompt you again for authentication. To do so, complete the following:

  1. Right-click the Thunderbolt icon.
  2. Click Approve Attached Devices.
  3. Select the Thunderbolt 3 port that you want to authenticate.

You can use the Thunderbolt™ software to manage your Thunderbolt 3 devices on a computer running a version of Windows. To manage your Thunderbolt 3 devices, complete the following:

  1. Click Start.
  2. Type Thunderbolt and click on the search result.
  3. Right-click the Thunderbolt icon.
  4. Click Manage Approved Devices.

Problemsökning

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

If your computer is not detecting your Thunderbolt™ 3 device, try the following:

  • Update the Thunderbolt software on your Thunderbolt 3 host device.
  • Update the Thunderbolt controller NVM firmware on your Thunderbolt 3 host device.
  • Update the Thunderbolt controller drivers.
  • Update your motherboard BIOS or UEFI.

For more information about how to update the software, firmware, drivers, and BIOS or UEFI, refer to the website of the manufacturer of the Thunderbolt 3 host device. The following website includes links to some of the manufacturers of Thunderbolt 3 host devices: https://thunderbolttechnology.net/updates. If the manufacturer of your host device is not listed, you should contact the manufacturer or refer to their website for more information.

For more information about how to check which version of the Thunderbolt software and firmware you are currently using, see the following FAQ: https://www.startech.com/faq/thunderbolt-3-check-software-firmware.

For more information about Thunderbolt 3 host system and motherboard compatibility, refer to the Thunderbolt 3 Compatibility and Troubleshooting guide.

If you are only getting a single display to work with your Thunderbolt™3 device, make sure that your Thunderbolt 3 host device can support two separate DisplayPort lines over Thunderbolt 3. 

While Thunderbolt 3 supports dual monitors over a single connection, not all Thunderbolt 3 host devices are designed to meet this requirement. If your Thunderbolt 3 host device does not meet this requirement, you cannot troubleshoot this issue with software, firmware, or driver updates, and you cannot use this device to achieve dual displays over Thunderbolt 3. If you are not sure whether your Thunderbolt 3 host device supports dual monitors, contact your Thunderbolt 3 host device manufacturer.

If you confirmed that your Thunderbolt 3 host device does support dual monitors and you are only seeing a single display, see the following FAQ: https://www.startech.com/faq/thunderbolt-3-update-software-firmware.

For more information about Thunderbolt 3 host system and motherboard compatibility, refer to the Thunderbolt 3 Compatibility and Troubleshooting guide.

If you receive an error message that your Thunderbolt device is not certified for PC use, try the following to resolve the issue:

  1. Click Start.
  2. Type Thunderbolt and click the search result.
  3. In the system tray, right-click the Thunderbolt icon.
  4. Click Settings.
  5. Clear the Only allow Thunderbolt Devices that have been certified for PC check box.