18in Right Angle Latching SATA Serial ATA Cable
A space-saving, latching right angle SATA hard drive cable, for installations in tight spaces.
Produkt ID: LSATA18RA2
The LSATA18RA2 Right Angle (90-degree) SATA Cable enables you to plug in your SATA hard drive in hard to reach areas or tight spaces, using right-angled SATA connectors to reduce the amount of space required at the connection point and supports full SATA 3.0 bandwidth of up to 6Gbps when used with SATA 3.0 compliant drives.
The latching connectors lock when connected to a supporting (latchable) SATA port, ensuring a snug, and secured data connection every time to prevent accidental disconnects.
Featuring a low profile, yet durable construction, the flexible design improves airflow and reduces clutter in your computer case, helping to keep the case clean and cool.
Constructed of only top quality materials and designed for optimum performance and reliability this 18" SATA cable is backed by our lifetime warranty.
Fördelarna med StarTech.com
- Right-angled latching SATA connectors easily fit into hard to reach areas and tight spaces, providing flexibility to position your SATA drive as needed within your system case, and secure the cable against accidental disconnection
- Features a thin cable design, which helps reduce clutter and increase airflow within the computer/server case, for optimum system performance
- Backed by StarTech.com lifetime warranty, ensuring a dependable connection
Installing Serial ATA hard drives, and DVD drives in Small Form Factor computer cases
Server and storage subsystem applications
High-end workstation drive installations
Connections to SATA Drive Arrays
|Information om garanti|
|Kabelmanteltyp||PVC - Polyvinyl Chloride|
|Typ och hastighet||SATA III (6 Gbps)|
|Connector A||1 - SATA (7-stifts, data) Med lås Honuttag|
|Connector B||1 - SATA (7-stifts, data) Med lås Honuttag|
|Kabellängd||457.2 mm [18 in]|
|Produktlängd||457.2 mm [18 in]|
|Fraktvikt (förpackning)||0 kg [0.1 lb]|
|Vad det är i lådan|
|Ingår i paketet||1 - 18in Right Angle Latching SATA Serial ATA Cable|
Drivrutiner & hämtningsbara filer
When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Hard disk drive
Hard drive controller (for example, motherboard)
To test your setup components, try the following:
Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.
Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:
Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.
If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.
For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.