StarTech.com

1 Port ExpressCard Parallel Laptop Adapter Card

1 Port ExpressCard 34mm Parallel Adapter Card

Produkt ID: EC1UP

  • Compliant with ExpressCard specifications 1.0
  • Fits into 34mm ExpressCard slots
  • Easy to use and install
Visa mer
  • Supports plug and play
  • IEEE 1284 compliant parallel port (DB25)
  • No IRQ, DMA, I/O Address resources required
7,99 € EUR exkl. moms
9,99 € EUR inkl. moms

Överblick

This ExpressCard (34mm) based Parallel Adapter Card provides a quick and easy way to connect EPP/ECP Parallel devices to a laptop computer using an available ExpressCard port.

Providing data transfer rates of up to 1.5Mbps, the Parallel Adapter Card (EC1UP) offers ideal performance and superb value by interfacing older parallel devices (USB-based printing support only) with cutting edge laptop designs through an ExpressCard port, eliminating the expense of upgrading parallel peripherals for compatibility with computers that don't offer native parallel support.

Fördelarna med StarTech.com

  • Easily add a parallel port to your notebook or laptop
  • Hot swap capabilities allow you to connect and disconnect devices without turning off your computer
  • Connect standard parallel devices to any Notebook with an open Express Card slot

Användning

Connects USB based parallel peripheral including printers, scanners, CD-R/RWs, Zip® drives, and memory card readers

Tekniska specifikationer

Information om garanti
Garanti Lifetime
Hårdvara
Busstyp ExpressCard (USB 2.0-buss)
Chipset-ID Prolific - PL2305
Gränssnitt Parallell
Korttyp ExpressCard 34mm
Portar 1
Porttyp Inbyggd på kort
Prestanda
Allmänna specifikationer 1ft Adapter Cable (DB26 male to DB25 male)
1x DB26 Female Connector
Bus Type USB based ExpressCard
Chipset Prolific PL2305
Connectors
Maximum Data Transfer Rate Up to 1.5Mbps
Kontakt(er)
Externa portar 1 - DB-25 (25-stifts, D-Sub) Hona
Kontakttyp(er) 1 - ExpressCard (34mm)
Mjukvara
OS-kompatibilitet Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000
Windows® Server 2008 R2, 2003(32/64)
Mac OS 10.x (Tested up to 10.8)
Utseende
Produktbredd 42 mm [1.7 in]
Produkthöjd 16 mm [0.6 in]
Produktlängd 122 mm [4.8 in]
Produktvikt 47 g [1.7 oz]
Förpackning
Fraktvikt (förpackning) 0.1 kg [0.2 lb]
Vad det är i lådan
Ingår i paketet 1 - Parallel ExpressCard
1 - Parallel Adapter Cable
1 - Instruction Manual

Kompatibilitet

Se alla kompatibla operativsystem
Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000
Windows® Server 2008 R2, 2003(32/64)
Mac OS 10.x (Tested up to 10.8)

Certifikat

Relaterade produkter

PCI Parallel Adapter Card
PCI1PECP
Parallella PCI-kortadapter med 1 port

Lägg till en höghastighetsparallellport (EPP/ECP) till din stationära dator via en utbyggnadskortplats för PCI

38,99 € exkl. moms
48,74 € inkl. moms
Low Profile PCI Parallel Adapter Card
PCI1P_LP
Lågprofils PCI parallell kortadapter med 1 port

Lägg till en parallellport till din lågprofils/lilla formfaktorsdator med en utbyggnadskortplats för PCI

35,99 € exkl. moms
44,99 € inkl. moms
1 Port ExpressCard Laptop Parallel Adapter Card -  SPP/EPP/ECP
EC1PECPS
1 Port ExpressCard Laptop Parallel Adapter Card - SPP/EPP/ECP

Add an IEEE 1284 Parallel port to your laptop computer via an ExpressCard slot

94,99 € exkl. moms
118,74 € inkl. moms

Tillbehör

Produktsupport

Vanliga frågor

Hur man

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your expansion card, complete the following:

  1. In the upper-left screen, click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your expansion card is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command + R with the System Information page open.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Problemsökning

When you troubleshoot issues with a parallel device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Parallel cables

  • Parallel ports

  • Parallel devices

To test your setup components, try the following:

  • Use the parallel cable, parallel port, and parallel device in another setup to see if the problem is with the components or the setup.

  • Use a different parallel cable, parallel port, and parallel device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the parallel ports and parallel device, it is recommended that you do the following:

Note: Some parallel devices only work if the LPT port number is between a certain range, usually LPT1 or LPT2.

This issue was the result of a Windows update that has recently been fixed in the KB3140743 update. If you are still experiencing this issue, download the latest Windows update.

You can also temporarily resolve the issue by completing the following:

  1. Press the Windows key + X.
  2. Click Device Manager.
  3. Expand the section for Ports (COM & LPT).
  4. Right-click on the LPT port that is experiencing the issue.
  5. Click Properties.
  6. Click the Port Settings tab.
  7. Under Filter Resource Method, select an option that is not currently selected.
  8. Click OK.