2 Port High-Resolution 350 MHz VGA Video Splitter / Distribution Amplifier (ST122PROEU)
2 Port VGA Video Splitter - 250 MHz
Split a VGA signal to 2 VGA monitors or projectors
Product ID: ST122LEU
- Supports resolutions up to 1920x1440
- Maximum cable distance 210 feet (65m)
- Supports Cascading up to 3 levels
- 250 MHz video bandwidth
- Compatible with VGA, SVGA and Multisync monitors
Not Available
May be in stock with partners
From a Partner
Support
Overview
The ST122LEU 2 Port VGA Video Splitter allows a single VGA source to display VGA video onto two monitors simultaneously. Perfect for classrooms, tradeshows, or in-store displays where high quality video on several monitors is needed. The simple plug and play operation makes setup quick and easy so you can be up and running in minutes.
The ST122LEU supports displays with up to 250 MHz of bandwidth, providing brilliant resolutions up to 1920x1440. A built-in booster circuit lets you situate your displays up to 210 ft away from your source.
Backed by a StarTech.com 2-year warranty and free lifetime technical support. Male to Female VGA extension cable required (MXT101HQ)
The StarTech.com Advantage
- Integrated signal amplifier boosts your connection range to 210 feet (65 meters)
- High quality construction and high resolution support maintains signal strength for crisp, sharp imaging
- Multiple screens let you communicate your message to large audiences with greater impact
Applications
Use for in-store product merchandising in retail environments to give your advertisements greater visibility
Display travel schedules and alerts in airports, bus terminals and train stations
Create engaging multimedia presentations for demonstration in lecture halls and classrooms
Get your message across multiple displays for trade-shows or information booths/kiosks
Quick and easy solution to split a video signal in an auditorium or house of worship
Technical Specifications
| Product Numbers | ||
|---|---|---|
| Ingram Micro Sweden | V931121 | |
| UPC Code | 065030820110 | |
| Warranty Information | ||
|---|---|---|
| Warranty | 2 Years | |
| Hardware | ||
| Ports | 2 | |
| Performance | ||
| Bandwidth | 250 MHz | |
| General Specifications | Male to Female VGA extension cable required (MXT101HQ) | |
| Maximum Analog Resolutions | 1920x1440 | |
| Maximum Cable Length | 65 m [213.2 ft] | |
| Connector(s) | ||
| Connector A | 1 - USB Type-A (4 pin) USB 2.0 Male | |
| 1 - VGA (15 pin, High Density D-Sub) Male | ||
| Connector B | 2 - VGA (15 pin, High Density D-Sub) Female | |
| Power | ||
| Center Tip Polarity | Positive | |
| Input Current | 0.5 | |
| Output Current | 0.5 A | |
| Output Voltage | 9 DC | |
| Plug Type | M | |
| Power Consumption (In Watts) | 4.5 | |
| Power Source | AC Adapter Included | |
| Environmental | ||
| Humidity | 0~90% RH, non-condensing | |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) | |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) | |
| Physical Characteristics | ||
| Color | Black | |
| Enclosure Type | Steel | |
| Product Height | 25.9 mm [1 in] | |
| Product Length | 65 mm [2.6 in] | |
| Product Weight | 221 g [7.8 oz] | |
| Product Width | 131.1 mm [5.2 in] | |
| Packaging Information | ||
| Shipping (Package) Weight | 0.8 kg [1.9 lb] | |
| What's in the Box | ||
| Included in Package | 1 - 2 Port VGA Splitter | |
| 1 - Power Adapter | ||
| 1 - User Manual | ||
Certifications
Accessories
6 ft Coax High Resolution VGA Monitor Extension Cable - HD15 M/F
Extend your VGA monitor connections by 6ft
10 ft Coax High Resolution VGA Monitor Cable HD15 M/M
Connect your VGA monitor with the highest quality connection available
25 ft Coax High Resolution Monitor VGA Cable - HD15 M/M
Connect your VGA monitor with the highest quality connection available
50 ft Coax High Resolution Monitor VGA Video Cable - HD15 to HD15 M/M
Connect your VGA monitor with the highest quality connection available
Product Support
Drivers & Downloads
Frequently Asked Questions
Before You Buy
This device outputs a VGA signal. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.
| Target connection | First conversion | Second conversion (if required) |
| DVI-D | VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. | HDMI to DVI-D: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. |
| DVI-I | VGA to DVI-I: https://www.startech.com/Cables/Audio-Video/Video-Adapter/DVIVGA/. | N/A |
| HDMI |
VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. |
N/A |
| DisplayPort | VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. | HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort. |
Note: You might need to use more than one converter as part of your solution; however, you should try to use the least number of converters and cables to connect your source and destination. If you have the option to convert to multiple target video connections, choose the option that requires the fewest number of conversions.
DVI-I and DVI-D
When you convert from VGA to DVI, you need to know if you are converting to a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you need, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.
You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.
Note: Certain devices may have a DVI-I connection but only support DVI-D signaling. It is important to verify that your DVI-I device supports DVI-I signaling.
This device has a VGA input port. If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.
|
Source connection |
Conversion |
|
DVI-I |
DVI-I to VGA: https://www.startech.com/DVIVGAMFBK. |
|
DVI-D |
DVI-D to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=DVI-D&filter_AVOUTPUT=VGA. |
|
HDMI |
HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA. |
|
DisplayPort |
DisplayPort to VGA: https://www.startech.com/AV/Displayport-Converters/DP-VGA/. |
DVI-I and DVI-D
When you convert from DVI to VGA, you need to know if you are converting from a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you have, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.
You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals. Some DVI-I connections only support DVI-D signaling. In this case, you must use a DVI-D to VGA converter.
Follow us on Twitter | Find us on Google+