Home SATA6RA1

StarTech.com

6in SATA to Right Angle SATA Serial ATA Cable

Make a right-angled connection to your SATA drive, for installation in tight spaces

Product ID: SATA6RA1

12in SATA to Right Angle SATA Serial ATA Cable

Gallery (1)

1x SATA connector
1x Right-angled/90-degree SATA connector
Supports full SATA 3.0 6Gbps bandwidth

Compatible with both 3.5" and 2.5" SATA hard drives
Provides 6" in cable length

2,99 € EUR exc VAT

3,74 € EUR inc VAT

Where To Buy

Overview

The SATA6RA1 Right Angle (90-degree) SATA Cable features a standard (straight) SATA receptacle as well as a right-angled SATA receptacle, providing a simple 6-inch connection to a Serial ATA drive, with full SATA 3.0 bandwidth support of up to 6Gbps when used with SATA 3.0 compliant drives.

The right-angled SATA connection enables you to plug in your Serial ATA hard drive in hard to reach areas or tight spaces, while the low profile and flexible design of the cable improves airflow and reduces clutter in your computer case, helping to keep the case clean and cool.

Constructed of only top quality materials and designed for optimum performance and reliability this 6" SATA cable is backed by our lifetime warranty.

As an alternative, StarTech.com also offers an 6in Left Angle SATA cable (SATA6LA1), which provides the same simple installation as this right angled SATA cable, but allows the cable to connect to the SATA drive from the opposite direction.

The StarTech.com Advantage

Right-angled SATA connector easily fits into hard to reach areas and tight spaces, providing flexibility to position your SATA drive as needed within your system case
Features a thin cable design, which helps reduce clutter and increase airflow within the computer/server case, for optimum system performance
Backed by StarTech.com lifetime warranty, ensuring a dependable connection

Applications

Installing Serial ATA hard drives, and DVD drives in Small Form Factor computer cases

Server and storage subsystem applications

High-end workstation drive installations

Connections to SATA Drive Arrays

Technical Specifications

Product Numbers

Ingram Micro Sweden

V931644

UPC Code

065030844093

Warranty Information
	Warranty	Lifetime
Hardware
	Cable Jacket Type	PVC - Polyvinyl Chloride
	Cable Shield Type	Aluminum-Mylar Foil with Braid
	Number of Conductors	7
Performance
	Type and Rate	SATA III (6 Gbps)
Connector(s)
	Connector A	1 - SATA (7 pin, Data) Receptacle
	Connector B	1 - SATA (7 pin, Data) Receptacle
Physical Characteristics
	Cable Length	152.4 mm [6 in]
	Color	Red
	Connector Style	Straight to Right Angle
	Product Height	15 mm [0.6 in]
	Product Length	152.4 mm [6 in]
	Product Weight	6 g [0.2 oz]
	Product Width	15 mm [0.6 in]
	Wire Gauge	26 AWG
Packaging Information
	Package Quantity	1
	Shipping (Package) Weight	11 g [0.4 oz]
What's in the Box
	Included in Package	1 - 6in SATA to Right Angle SATA Serial ATA Cable

Certifications

Product Support

Data Sheets

SATA6RA1_Datasheet.pdf
- Language: English

Frequently Asked Questions

Troubleshooting

Everything is hooked up but nothing is working. What should I do?

When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

Hard disk drive
Hard drive controller (for example, motherboard)
SATA cable

To test your setup components, try the following:

Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.
Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:

Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.
If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.

For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.

Copy Link

Was this information helpful? Yes No

Compliance and Safety

Compliance Letters

Country of Origin (COO)
- Language: English
Letter of Conformity (LOC)
- Language: English
Waste Electrical and Electronic Equipment Directive (WEEE)
- Language: English

Safety Measures

If product has an exposed circuit board, do not touch the product under power.
If Class 1 Laser Product. Laser radiation is present when the system is open.
Wiring terminations should not be made with the product and/or electric lines under power.
Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.

Are you in the United States?

CHAT LIVE

Categories

Browse By

6in SATA to Right Angle SATA Serial ATA Cable

Make a right-angled connection to your SATA drive, for installation in tight spaces

Overview

The StarTech.com Advantage

Applications

Technical Specifications

Certifications

Related Products

6in SATA Serial ATA Cable

6in Latching SATA Cable

6in SATA to Left Angle SATA Serial ATA Cable

6 ft Shielded eSATA to SATA Cable

6 ft Shielded External eSATA Cable M/M