2.5in and 3.5in 40 Pin Male IDE to SATA Adapter Converter
IDE2SATConnect your SATA drive to an IDE motherboard
This IDE/ATAPI to SATA adapter lets you connect a SATA drive to a motherboard IDE/ATA 33/66/100/133 port.
The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer SATA drive and older motherboard designs, allowing you to connected newer SATA drives to a older IDE motherboard port and in turn eliminating the need to upgrade the motherboard for the sake of compatibility with the drives.
Saving time and hassle, the IDE to SATA adapter can be connected through simple plug and play installation and is backed by StarTech.com's Lifetime Warranty and free lifetime technical support.
The StarTech.com Advantage
- Connect a SATA drive to an IDE system without having to install any special drivers or software
- Backed by a StarTech.com lifetime warranty and free lifetime technical support
Features
- Connect a SATA device to an IDE/ATA motherboard or controller card
- Complete hardware solution; no software required
- Support for 48-bit Logical Block Addressing (LBA)
- Compliant with SATA revision 1.0 specification
- Compatible with Ultra ATA 133 specification
Applications
- An internal solution for connecting your SATA hard drive to a motherboard supporting an IDE interface.
- Ideal for use with older motherboards that do not support SATA.
Product Numbers
| Dell Harmony | A1497029 |
| TechData Dis | 10920271 |
| ASI Distribution USA | 81380 |
| D and H | IDE2SAT |
| Ingram Micro USA | Q16737 |
| Synnex US | STA-IDE2SAT |
| UPC Code | 065030826082 |
Technical Specifications
| Warranty Information | |
|---|---|
| Warranty | Lifetime |
| Hardware | |
| Chipset ID | Marvell - 88SA8052 |
| Connector(s) | |
| Connector Type(s) | 1 - IDE (40 Pin; EIDE/PATA) Male |
| 1 - SATA Data & Power Combo (7+15 pin) Receptacle | |
| 1 - SP4 (4 pin; Small Drive Power) Male | |
| Performance | |
| Maximum Data Transfer Rate | 133MB/sec |
| Physical Characteristics | |
| Product Length | 3 in [75.5 mm] |
| Product Width | 0.8 in [20 mm] |
| Product Height | 0.9 in [23 mm] |
| Product Weight | 0.5 oz [15 g] |
| Environmental | |
| Operating Temperature | 5°C to 50°C (40°F to 122°F) |
| Storage Temperature | -25°C to 80°C (-13°F to 176°F) |
| Humidity | 15~90% RH |
| Special Notes / Requirements | |
| System and Cable Requirements | An IDE controller and ATA cable (not included). |
| Packaging Information | |
| Shipping (Package) Weight | 0.2 lb [0.1 kg] |
| What's in the Box | |
| Included in Package | 1 - IDE to SATA adapter |
| 1 - LP4 Molex to SP4 Power Cable | |
| 1 - Instruction Manual | |
Related Products
USB 2.0 to SATA IDE Adapter
Quickly and easily connect SATA and/or IDE hard drives through USB 2.0IDE to SATA Adapter Converter
Connect 2 SATA hard drives to an IDE motherboard or card40 Pin Female IDE to SATA Adapter Converter
Allows connection of a SATA device to an IDE motherboard or cardAccessories
LP4 to 2x LP4 Power Y Splitter Cable M/F
Connect two LP4 peripherial devices (CD/DVD-ROM drives etc.) to a single LP4 connectorDownloads
Manual(s):
- IDE2SAT.pdf
English - IDE2SAT-ES.pdf
Español - IDE2SAT-DE.pdf
Deutsch - IDE2SAT-FR.pdf
Français
Data Sheet(s)
- IDE2SAT_Datasheet.pdf
English - IDE2SAT_Datasheet-DE.pdf
Deutsch - IDE2SAT_Datasheet-ES.pdf
Español - IDE2SAT_Datasheet-FR.pdf
Français - IDE2SAT_Datasheet-IT.pdf
Italiano - IDE2SAT_Datasheet-NL.pdf
Nederlands

























Follow us on Twitter | Find us on Google+