3.5in SATA to CompactFlash SSD Adapter Card for 3.5 Drive Bay
35BAYCF2SATThis 3.5in SATA to CompactFlash SSD Adapter Card allows you to connect a CompactFlash card to a host computer through a Serial ATA data port - a cost-effective solution that lets you use solid state storage in place of a SATA hard disk drive.
The adapter includes a 3.5in bracket that lets you mount it in the front or rear panel of the computer case, suitable for any 3.5in drive bay or available expansion slot - providing easy access to the CF slot. Once the adapter is installed in the computer, the CompactFlash card can be used as an ejectable, bootable drive - providing full read and write access to the CF card, as if it were a SATA hard drive.
The StarTech.com Advantage
- Quick and driver free installation into any SATA slot
- Easily swap cards in and out with built-in push button ejector
Features
- Quick and driver free installation into any SATA slot
- Fully compatible with Compact Flash Type I/II and IBM Micro-drive
- Allows Compact flash card to be used as bootable storage
- Easy to use jumpers offer simple master/slave drive setting.
- Can be mounted in the front or rear panel of your case, to fit into any 3.5” bay or available expansion slot
- Easily swap cards in and out with built-in push button ejector
Applications
- Use your compact flash card as a bootable and removable device
- Excellent for swapping operating systems quickly without having to take your computer apart.
- Connect your compact flash card to a SATA slot
Product Numbers
| Dell Harmony | A1249715 |
| TechData Dis | 617407 |
| ASI Distribution USA | 100313 |
| Ingram Micro USA | M75240 |
| Synnex US | STA-35BAYCF2SAT |
| UPC Code | 065030824187 |
Technical Specifications
| Warranty Information | |
|---|---|
| Warranty | 2 Years |
| Connector(s) | |
| Drive Connectors | 1 - CompactFlash (50 pin) Slot |
| Host Connectors | 1 - SATA (7 pin; Data) Plug |
| 1 - SP4 (4 pin; Small Drive Power) Male | |
| Performance | |
| Memory Media Type | CF (Compact Flash I/II Card) |
| Physical Characteristics | |
| Product Length | 2.8 in [70 mm] |
| Product Width | 4.7 in [120 mm] |
| Product Height | 0.8 in [20 mm] |
| Product Weight | 1.6 oz [45 g] |
| Environmental | |
| Humidity | 5% ~ 85% RH |
| Operating Temperature | -55°C to 85°C (-67°F to 185°F) |
| Storage Temperature | -55°C to 85°C (-67°F to 185°F) |
| Special Notes / Requirements | |
| Note | This product does not support hot-swapping of flash cards while the PC is powered on. You must turn-off your computer to switch cards |
| Packaging Information | |
| Shipping (Package) Weight | 0.5 lb [0.2 kg] |
| What's in the Box | |
| Included in Package | 1 - Compact Flash to IDE Adapter |
| 1 - 3.5” Enclosure | |
| 1 - Expansion Bracket | |
| 1 - SP4 to LP4 Adapter Cable | |
| 1 - Screw Kit | |
| 1 - Instruction Manual | |
Related Products
Downloads
Manual(s):
- 35BAYCF2xxx.pdf
English
Data Sheet(s)
- 35BAYCF2SAT_Datasheet.pdf
English - 35BAYCF2SAT_Datasheet-ES.pdf
Español - 35BAYCF2SAT_Datasheet-FR.pdf
Français - 35BAYCF2SAT_Datasheet-IT.pdf
Italiano - 35BAYCF2SAT_Datasheet-NL.pdf
Nederlands


















Follow us on Twitter |