Product ID: DP2HDVGA
This DisplayPort to HDMI + VGA travel adapter lets you connect your DP enabled Ultrabook™ or laptop computer to any VGA or HDMI® display.
Why keep several adapters when you only need one? With this single DisplayPort tor VGA and HDMI adapter you can rest assured that your computer can interface with any modern boardroom or classroom display. It’s the ideal plug-and-play solution for BYOD (Bring Your Own Device) applications at the office.
Plus, because the converter supports video resolutions up to 1920x1200 or 1080p, you can convert your DisplayPort video source to HDMI or VGA without sacrificing video quality.
The travel A/V adapter maximizes portability with a small footprint and lightweight design. This convenient construction ensures the adapter is as portable as your laptop, fitting easily into your laptop bag or carrying case and eliminates the need to carry more than one adapter.
With this adapter you can walk into virtually any boardroom ready to present, making a great first impression and saving you the embarrassment of having to rummage through your bag looking for the right connector. Plus, the 2-in-1 converter installs easily with no software or drivers required.
The StarTech.com DP2HDVGA is backed by a 3-year StarTech.com warranty and free lifetime technical support.
|Warranty Information||Warranty||3 Years|
|Connector(s)||Connector A||1 - DisplayPort (20 pin)|
|Connector B||1 - HDMI (19 pin)|
|1 - VGA (15 pin, High Density D-Sub)|
|Environmental||Operating Temperature||0°C to 60°C (32°F to 140°F)|
|Storage Temperature||-10°C to 70°C (14°F to 158°F)|
|Hardware||Active or Passive Adapter||Active|
|AV Input||DisplayPort - 1.2|
|HDMI - 1.4|
|Active or Passive Adapter||Passive|
|Packaging Information||Package Height||14 mm [0,6 in]|
|Package Length||22 cm [8,7 in]|
|Shipping (Package) Weight||0,0 kg [0,1 lb]|
|Package Width||20 cm [7,9 in]|
|Performance||Audio Specifications||HDMI - 7.1 Channel Audio|
|Maximum Cable Distance To Display||15200|
|Maximum Analog Resolutions||1920x1200/1080p|
|Maximum Digital Resolutions||1920x1200/1080p|
|Wide Screen Supported||Yes|
|Physical Characteristics||Weight of Product||37 g [1,3 oz]|
|Cable Length||150 mm [5,9 in]|
|Product Length||19 cm [7,5 in]|
|Product Width||58 mm [2,3 in]|
|Product Height||1,3 cm [0,5 in]|
|Special Notes / Requirements||Note||The HDMI port is a passive port.
The VGA port is an active port.
|Maximum Cable Distance to Display refers to digital video. VGA distance capabilities are dependent upon the quality of your cabling|
|What's in the Box||Included in Package||1 - DisplayPort™ to HDMI® / VGA Adapter|
|1 - Instruction manual|
Connect your VGA monitor with the highest quality connection available
Check that the device is not being used in reverse.
The display does not support the resolution set within Display Settings. Adjust the resolution to be the exact resolution and refresh rate recommended by the display manufacturer.
If a DisplayPort converter with audio is not passing sound from the source to the destination, complete the following:
To arrange extended displays on Windows 10, complete the following.
To arrange extended displays on macOS, complete the following.
When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.
If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.
Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.
Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.
Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.
If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.
Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters. For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.
If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).
Note: This issue does not apply to the Surface Pro 3 Docking Station.