StarTech.com

Fiber Optic Cable - 10 Gb Aqua - Multimode Duplex 50/125 - LSZH - LC/LC - 5 m

Deliver fast, reliable, data transfers, safely over high end networking equipment

Product ID: A50FBLCLC5

  • 2x LC MM male connectors
  • Laser-optimized multimode fiber (LOMMF)
  • OM3 (50/125) 2000MHz multimode fiber
View More
  • Compatible with 850nm VCSEL source
  • Molded connectors
23,99 € EUR exc VAT
23,99 € EUR inc VAT
Not Available
May be in stock with partners
Where To Buy

For more products like this please visit our European online store today!

Overview

The StarTech.com Advantage

  • Suitable for installations under restrictive building codes, with LSZH rating
  • Guaranteed reliability

Applications

Fiber Connections in Patch Panels, Hubs, Switches, Routers

Technical Specifications

Warranty Information
Warranty Lifetime
Hardware
Fire Rating LSZH Rated (Low Smoke Zero Halogen)
Performance
Cable Rating 10Gbps / 40Gbps / 100Gbps
Fiber Classification OM3
Maximum Data Transfer Rate 100Gbps
Wavelength 850nm
Connector(s)
Connector B 1 - Fiber Optic LC Duplex Male
Environmental
Storage Temperature -20°C to 60°C (-4°F to 140°F)
Physical Characteristics
Cable Length 5 m [16.4 ft]
Diameter 3mm
Product Length 5 m [16.4 ft]
What's in the Box
Included in Package 1 - 5m 10Gb Aqua Multimode 50/125 Duplex LSZH Fiber Patch Cable LC - LC

Certifications

Product Support

Frequently Asked Questions

Before You Buy

Different optical cables are needed for different applications. Before you select a cable to interconnect fiber devices, make sure that the following things match:

  • Mode: Single Mode or Multi Mode.

  • Wavelength: For example, 850 nm, 1310 nm, or 1550 nm.

Note: The above properties cannot be converted or changed by a cable.

When you select a cable, make sure that the cable ends (for example, LC, SC, ST, or MT) match the fiber media devices.

Simplex and duplex ends are available for most connector types. Simplex cables have the connectors separate, where duplex cables have the transmit (TX) and receive (RX) connectors joined together.  StarTech.com fiber media devices are compatible with simplex and duplex connectors.

It does not matter which diameter or OM classification the cable uses, as long as it meets the mode requirement.

Fiber media converters can be used to convert a standard Ethernet connection to a standard fiber connection, or can be used to extend a copper Ethernet network. When you use fiber media converters to extend a copper Ethernet network, make sure that the same fiber standards are being used on either end of the fiber network.

UPC and APC are fiber cable connector types. UPC (Ultra Physical Contact) connectors have a fiber connector end face that has been polished to be dome-shaped. This results in light that can be reflected straight back to the source.

APC (Angled Physical Contact) connectors have a fiber connector end face that has been polished at an eight degree angle. This results in a reduced amount of light that is reflected between the two connected fibers.

StarTech.com fiber cables use UPC connectors.