Are you in the United States?
Visit our U.S.A. & International site for relevant pricing, distribution and product availability information.
Go to StarTech.com2 Port SATA 6 Gbps PCI Express eSATA Controller Card
Add Two eSATA 3.0 (6Gbps) Ports for High Speed Access to Large External Storage Solutions
Product ID: PEXESAT32
- Supports SATA Rev 3.0 transfer speeds up to 6.0Gbps; backward compatible with SATA I/II at 1.5/3.0Gbps
- Port Multiplier FIS-based and Command-based switching supported
- Supports RAID 0 and 1 modes
- Uses existing SATA I/II connectors and cabling
- LED headers for HDD activity LED indicators
- Supports Native Command Queuing (NCQ) and ATA/ ATAPI commands
- Compliant with PCI Express 2.0 standards
- Ships with a full profile bracket install, low profile included
Not Available
May be in stock with partners
From a Partner
Support
Overview
The PEXESAT32 2 Port PCI Express 6Gbps eSATA Controller Card offers simple connectivity between a host computer and eSATA 3.0 devices - a cost-effective solution for connecting high-speed storage, such as High RPM Hard Drives and Solid State Drives (SSD), which in turn allows for easier data backups and archiving.
With full support for SATA 3.0 hard drives and data transfer speeds of up to 6 Gbps, the adapter card features a native PCI Express single chipset that provides enhanced compatibility, reliability and performance for external SATA 600 MB/s storage needs.
The controller card is backward compatible with SATA 2.0 devices, providing the versatility to use older storage, and features support for RAID 0 and 1 modes as well as port multiplier capability with command-based and FIS-based switching for connecting multiple external hard drives to a host PC through a single external SATA connection.
A dual profile solution, the eSATA controller card includes a low profile/half-height bracket for installation in slimline or small form factor computer cases.
The StarTech.com Advantage
- Supports SATA 3.0 data transfer speeds up to 6Gbps - twice the speed of SATA II (3Gbps)
- Ships with a full profile bracket installed and includes a low profile/half-height bracket that provides the option to install in a small form factor PC
Applications
Adding multi-drive external raid storage solutions, with support for full SATA 3.0 data transfer rates of up to 6Gbps
A cost-effective solution for streaming multimedia or archiving video, relying on the impressive speeds offered by SATA 3.0 (up to 6Gbps)
Technical Specifications
Product Numbers | ||
---|---|---|
Ingram Finland | V931057 | |
UPC Code | 065030838948 |
Warranty Information | ||
---|---|---|
Warranty | Lifetime | |
Hardware | ||
Bus Type | PCI Express | |
Card Type | Standard Profile (LP bracket incl.) | |
Chipset ID | Marvell - 88SE9128 | |
Interface | eSATA | |
Ports | 2 | |
Performance | ||
ATAPI Support | Yes | |
Bootable | Yes | |
LBA support | 48-bit | |
Maximum Data Transfer Rate | 6 Gbps | |
MTBF | 5,046,000 Hours | |
Number of Drives Supported Through Port Multiplier | 1 to 5 | |
Number of Ports That Support Port Multiplier | 2 (can only use 1 PM at a time) | |
Port Multiplier | Yes | |
RAID | Yes | |
Supported RAID Modes | RAID 0 (Striped Disks) | |
RAID 1 (Mirrored Disks) | ||
JBOD - (Just a Bunch of Disks) | ||
Type and Rate | SATA III (6 Gbps) | |
Connector(s) | ||
Connector Type(s) | 1 - PCI Express x1 Male | |
External Ports | 2 - eSATA (7 pin, Data) Plug | |
Software | ||
Microsoft WHQL Certified | Yes | |
OS Compatibility | Windows® XP, Vista, 7, 8, 8.1, 10 Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016 Mac OS® 10.6 to 10.13 Linux 3.5.x to 4.11.x LTS Versions only Note: Connected drives cannot be used as System / Primary drive in Windows Server 2012, 2012 R2, 2016 |
|
Special Notes / Requirements | ||
Note | The maximum throughput of this card is limited by the bus interface. If used with PCI Express Gen 1.0 enabled computers, the max throughput is 2.5 Gbps. If used with PCI Express Gen 2.0 enabled computers, the max throughput is 5 Gbps.
Only one port can use the Port Multiplier feature at a time. |
|
Alarm function is not supported in MSU software. | ||
Environmental | ||
Humidity | 15~90% RH | |
Operating Temperature | 5°C to 50°C (41°F to 122°F) | |
Storage Temperature | -25°C to 70°C (-13°F to 158°F) | |
Physical Characteristics | ||
Product Height | 20 mm [0.8 in] | |
Product Length | 70 mm [2.8 in] | |
Product Weight | 36 g [1.3 oz] | |
Product Width | 120 mm [4.7 in] | |
Packaging Information | ||
Shipping (Package) Weight | 122 g [4.3 oz] | |
What's in the Box | ||
Included in Package | 1 - eSATA 6Gbps PCI Express Card | |
1 - Low Profile Bracket | ||
1 - Driver CD | ||
1 - Instruction Manual |
Compatibility









Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Mac OS® 10.6 to 10.13
Linux 3.5.x to 4.11.x LTS Versions only
Note: Connected drives cannot be used as System / Primary drive in Windows Server 2012, 2012 R2, 2016
Related Products
2 Port SATA 6 Gbps PCI Express SATA Controller Card
Add two SATA 6Gbps ports for high speed access to large internal storage solutions
1 Port eSATA + 1 Port SATA PCI SATA Controller Card w/ LP Bracket
Add an internal SATA port and an external SATA (eSATA) port to your desktop computer through a PCI expansion slot
1 Port PCI Express eSATA II Controller Card
Add an eSATA port to a desktop computer through a PCI Express slot
2 Port PCI Express eSATA Controller Adapter Card
Add 2 eSATA ports to your desktop computer through a PCI Express expansion slot
2 Port CardBus eSATA Laptop Controller Adapter Card
Adds 2 eSATA ports to a laptop through a CardBus slot
Accessories
91cm (3 ft) Shielded External eSATA Cable M/M
Connect your external SATA storage devices to your Laptop or desktop.
1,8m (6 ft) Shielded External eSATA Cable M/M
Connect your external SATA storage devices to your Laptop or desktop.
Product Support
Drivers & Downloads
Driver(s):
-
[Marvell 88SE9128] PCIe SATA eSATA Card.zip
Version: 1.2.0.1041
Manual(s):
-
PEXxSAT32.pdf
English
Software
-
Marvell_MSU_Windows.zip
Version: 4.1.0.2031 -
Marvell_MSU_OSX.zip
Version: 4.1.0.2035 -
Marvell_MSU_Linux.zip
Version: 4.1.0.2031
RedHat Enterprise 6.0
Redhat Enterprise 5.4 SUSE
Linux Enterprise 11SP1
Compliance Letter(s):
Data Sheet(s)
- PEXESAT32_Datasheet-EN-EU.pdf
English
Frequently Asked Questions
Before You Buy
Although you can adapt a Serial Attached SCSI (SAS) drive to connect to a standard SATA controller card, the card must support SAS commands in order to communicate with SAS drives. SAS drives have a different command set that is not present on SATA controllers.
This SATA controller card only supports standard SATA drives.
Copy Link
Was this information helpful? Yes No
This device supports the ATA Packet Interface (ATAPI) protocol. ATAPI is required for optical drives, including CD-ROM drives, DVD-ROM drives, and Blu-ray players. Because this device supports ATAPI, optical drives are also supported.
Copy Link
Was this information helpful? Yes No
Note: Not all StarTech.com devices support each of the RAID modes described below. For more information on the RAID modes that your device supports, refer to the manual or the StarTech.com product page.
Redundant Array of Independent Disks (RAID) is a virtual disk technology that combines multiple physical drives into one unit. RAID can create redundancy, improve performance, or do both.
RAID should not be considered a replacement for backing up your data. If critical data is going onto a RAID array, it should be backed up to another physical drive or logical set of drives.
The following are terms that are normally used in connection with RAID:
- Striping: data is split between multiple disks.
- Mirroring: data is mirrored between multiple disks.
- Parity: also referred to as a checksum. Parity is a calculated value used to mathematically rebuild data.
Different RAID levels exist for different application requirements.
Refer to the following table for the list of RAID modes offered by some StarTech.com products:
RAID mode | Description | Operation | Advantages | Disadvantages | Recovery |
RAID 0 | Striped disks | Data is split evenly between two or more disks. | Large size and the fastest speed. | No redundancy. | If one or more drives fails, this results in array failure. |
RAID 1 | Mirrored disks | Two or more drives have identical data on them. | A single drive failure will not result in data loss. | Speed and size is limited by the slowest and smallest disk. | Only one drive is needed for recovery. |
RAID 3 | Striped set with dedicated parity | Data is split evenly between two or more disks, plus a dedicated drive for parity storage. | High speeds for sequential read/write operations. | Poor performance for multiple simultaneous instructions. | A single drive failure will rebuild. |
RAID 5 | Striped disks with distributed parity | Data is split evenly between three or more disks. Parity is split between disks. | Large size, fast speed, and redundancy. | The total array size is reduced by parity. | A single drive failure will rebuild. |
RAID 10 | 1+0; Striped set of Mirrored Subset | Four or more drives are made into two mirrors that are striped. | Larger size and higher speed than RAID-1, and more redundancy than RAID-0. | No parity. | Only one drive in a mirrored set can fail. |
JBOD | Just a Bunch Of Disks | Any number of drives are accessed independently by the operating system. | Software RAID modes can be used. | Hardware RAID may have better performance. | N/A |
Big | Spanning or Concatenation | Data is written on one drive until it is full, and then the next drive(s) until it or they are full. | Creates a very large and simple array. |
No redundancy. |
N/A |
Clone | RAID 1 + Spare |
Two drives have identical data, plus one drive is used for rebuilding in case of a primary array failure. |
Seamless operation when one drive fails in a RAID-1 array. | Spare drive is not accessible to the user. | Only one drive is needed for recovery. |
Copy Link
Was this information helpful? Yes No
* Product appearance and specifications are subject to change without notice.