StarTech.com

10-Port Industrial USB 3.0 Hub - ESD and Surge Protection

Add ten USB 3.0 (5Gbps) ports with this DIN rail or surface-mountable metal hub

Product ID: ST1030USBM

  • Provides maximum USB scalability, with ten USB 3.0 Type-A ports
  • Protects your connected devices with 15kV ESD protection and 350-watt surge protection
  • Offers flexible, wide-range 7-24V DC terminal block power input (standard AC power adapter not supported or included)
View More
  • Ideal for harsh industrial environments, with an extended operating temperature range
  • Rugged, wall-mountable metal housing plus optional DIN rail mounts
  • Supports USB Battery Charging Specification 1.2 and delivers 1.5 amps to each USB port
  • Ten SuperSpeed USB 3.0 hub ports, with throughput support up to 5Gbps
  • Supports multi transaction translators (Multi-TT) on each port for legacy USB devices
  • Integrated, threaded screw-lock holes - prevent cables from becoming loose or disconnected in an industrial environment
  • Backward compatible with USB 2.0 and 1.x devices
195,99 € EUR exc VAT
195,99 € EUR inc VAT
Not Available
May be in stock with partners
Where To Buy

For more products like this please visit our European online store today!

Overview

This 10-port USB 3.0 hub gives you the scalability you need in harsh industrial environments. It’s designed to meet the advanced requirements of connecting a high number of devices in factory and industrial settings.

With a metal housing, you can depend on this industrial hub even in tough operating conditions. And because it offers more ports than most USB 3.0 hubs, you can access more devices at once, so you can work more efficiently and save time.

Photo of the hub installed on a DIN rail in a test bench environment

Connect more USB devices

Designed for a high volume of connections in industrial environments, this robust USB 3.0 hub offers ten connection ports, unlike most four or seven-port USB 3.0 (also known as USB 3.1 Gen 1) hubs.

With more ports you can connect more devices, such as USB-based control equipment, external storage, and more. Plus, you can avoid the aggravation of connecting and disconnecting devices when all ports are occupied.

The hub also supports USB Battery Charging Specification 1.2, delivering up to 1.5 amps power to each USB port, so you can charge your mobile devices faster than traditional USB ports allow.

Perfect for harsh industrial environments

This industrial USB hub delivers reliable performance with a metal, heavy-duty housing. And because it supports wide-range 7-24V DC terminal block input, you have the flexibility to power the hub as required, based on your own power input capabilities.

Perfect for factory environments, the rugged hub also supports an extended operating temperature range (0°C to 70°C) and offers surge and ESD protection to each USB port, which can help prevent damage to your connected devices.

Locate the hub where you need it most

With versatile installation options, you can install the hub where it’s best suited for your environment. You can securely mount the USB 3.0 hub to a surface, wall, or under a desk, and, it includes optional DIN rail mounts for use with equipment rack installations.

Works with your older USB devices

The industrial hub supports the full 5Gbps bandwidth of USB 3.0 and is also backward compatible with previous USB devices. You can connect your legacy USB 2.0 and 1.x peripherals alongside your newer USB 3.0 devices without any disruptions.

The ST1030USBM is backed by a StarTech.com 2-year warranty and free lifetime technical support.

Applications

Install the hub in tough conditions that are subject to large temperature variances, or where there’s a risk of physical damage

Deploy on assembly lines where only terminal block power is available

Connect a variety of USB devices such as industrial printers or cameras, plus fast-charge your smartphone and tablet

Technical Specifications

Warranty Information
Warranty 2 Years
Hardware
Bus Type USB 3.0
Chipset ID Genesys Logic - GL3520
Fast-Charge Port(s) Yes
Industry Standards USB Battery Charging Specification Rev. 1.2
USB 3.0 - Backward compatible with USB 2.0/1.1
Interface USB 3.0
Ports 10
USB-C Device Port(s) No
USB-C Host Connection No
Performance
Maximum Data Transfer Rate 5 Gbps
MTBF 119388 hours
Surge Protection 15kV ESD protection
350 W surge protection
Type and Rate USB 3.0 - 5 Gbit/s
Connector(s)
Connector Type(s) 10 - USB Type-A (9 pin) USB 3.0 Female
1 - USB Type-B (9 pin) USB 3.0 Female
1 - Terminal Block (2 Wire)
Software
OS Compatibility OS Independent; No additional drivers or software required
Special Notes / Requirements
Note If connected to a USB 2.0 host port, performance may be limited
This product is intended for use with terminal block power only – Standard AC adapter not available
System and Cable Requirements Host computer with an available USB 3.0 port
Indicators
LED Indicators 1 - Power (Green)
Power
Input Voltage 7 ~ 24 DC
Power Source Terminal Block
Environmental
Humidity 5%~95% RH (Non-condensing)
Operating Temperature 0°C to 70°C (32°F to 158°F)
Storage Temperature -20°C to 85°C (-4°F to 185°F)
Physical Characteristics
Cable Length 2032 mm [80 in]
Color Black
Enclosure Type Steel
Form Factor Industrial
Product Height 31 mm [1.2 in]
Product Length 198 mm [7.8 in]
Product Weight 343 g [12.1 oz]
Product Width 56 mm [2.2 in]
Packaging Information
Shipping (Package) Weight 567 g [20 oz]
What's in the Box
Included in Package 1 - 10-port industrial USB 3.0 hub
1 - USB 3.0 host cable
1 - DIN rail mounting kit
1 - terminal block (2 wire)
1 - instruction manual
Supports any operating system.
No additional drivers or software required.

Certifications

Related Products

7-Port Industrial USB 3.0 Hub with ESD Protection
ST7300USBME
7-Port Industrial USB 3.0 Hub with ESD Protection

Add seven USB 3.0 ports with this DIN rail or surface-mountable metal hub

143,99 € exc VAT
143,99 € inc VAT
4-Port Industrial USB 3.0 Hub - Mountable
ST4300USBM
4-Port Industrial USB 3.0 Hub - Mountable

Add 4 external, wall mountable USB 3.0 ports from a single USB connection

123,99 € exc VAT
123,99 € inc VAT
7-Port USB 3.0 Hub - Desktop or Wall-Mountable Metal Enclosure
ST7300U3M
7-Port USB 3.0 Hub - Desktop or Wall-Mountable Metal Enclosure

Connect 7 high-performance devices to your computer or Mac with this compact and rugged hub

79,99 € exc VAT
79,99 € inc VAT
7-Port USB 3.0 Hub - Desktop
ST7300USB3B
7-Port USB 3.0 Hub - Desktop

Add 7 external, USB 3.0 ports to a computer from a single USB connection

67,99 € exc VAT
67,99 € inc VAT

Accessories

Product Support

Frequently Asked Questions

Before You Buy

It is possible to use some USB hubs without a power supply, however, doing so may prevent certain high-power USB peripherals from operating.

When a power adapter is not used on a hub that comes with a power adapter, power is drawn from the USB port on the computer and then divided between the ports on the hub. This reduces the power delivery to individual ports and high-powered USB peripherals, such as external hard drives, may not start.

On USB hubs that can use a power adapter, more power can be supplied to USB ports than what is possible with a single USB port.

If your USB peripherals require power adapters, they probably do not require power from the USB port and can be used on a USB hub without a power adapter. With USB peripherals that use power adapters, the USB ports on the hub are only used for data transfer and do not draw power from the hub.

USB peripherals that require low power (for example, keyboards and mice) can be used on hubs without a power adapter, in conjunction with other low-power USB peripherals. In this case, power is drawn from the computer's USB port, as described above.