USB 3.1 (10Gbps) Adapter Cable for 2.5 SATA Drives
Connect a 2.5" SATA SSD/HDD to your computer using this USB 3.1 Gen 2 ultra-portable cable
Product ID: USB312SAT3CB
Here’s a fast, easy way to access data on a 2.5" solid-state or hard drive. This cable-style adapter lets you connect your laptop or desktop computer directly to a solid-state drive and access it through ultra-fast USB 3.1 Gen. 2 (up to 10 Gbps).
Convenient drive access
With the adapter cable, you can quickly swap hard drives without having to install your drives into an enclosure. You can copy or retrieve data from a 2.5" SSD/HDD quickly with no additional accessories required. It gives you easy drive access for data migration, drive cloning and data backup applications, with the fast performance of USB 3.1 Gen 2.
Harness the speed of USB 3.1 Gen 2
USB 3.1 Gen 2 gives you greater bandwidth and speed with rates of up to 10 Gbps - twice the speed of USB 3.0 (USB 3.1 Gen 1) technology. It lets you leverage the high performance of the latest SSDs and hard drives, while alleviating bottlenecks in your data transfers.
Ultra-portable with no external power required
This cable-style adapter features a compact, lightweight design that tucks easily into a laptop bag or carrying case. Use it wherever you go to access valuable data quickly - with no external power required.
The USB312SAT3CB is backed by a StarTech.com 2-year warranty and free lifetime technical support.
- Technicians who need a quick, easy way to access data on 2.5” hard drives
- Take advantage of the faster speed of USB 3.1 Gen 2 (10 Gbps)
- Access any 2.5" hard drive or solid-state drive from any USB enabled computer, for data migration or drive cloning
- Back up important data to an external storage device
- Retrieve data from an old SATA drive
|Bus Type||USB 3.1 Gen 2|
|Chipset ID||ASMedia - ASM1351|
|Compatible Drive Types||SATA|
|Interface||USB 3.1 Gen 2|
|Number of 2.5 inch bays||1|
|Number of Drives||1|
|Hot Swap Capability||Yes|
|Max Drive Capacity||Currently tested with hard drives up to 2TB at 7200 RPM|
|Maximum Data Transfer Rate||10 Gbps|
|Type and Rate||USB 3.1 Gen 2 - 10 Gbit/s|
|Drive Connectors||1 - SATA Data & Power Combo (7+15 pin) Receptacle|
|Host Connectors||1 - USB 3.1 USB Type-A (9 pin, Gen 2, 10 Gbps) Male|
|OS Compatibility||OS independent; No software or drivers required|
|Special Notes / Requirements|
|Note||Windows 7 and earlier Windows versions do not support TRIM with USB to SATA devices.|
|Humidity||40% ~ 50% RH|
|Operating Temperature||0°C to 70°C (32°F to 158°F)|
|Storage Temperature||-10°C to 55°C (14°F to 131°F)|
|Product Height||0.8 cm [0.3 in]|
|Product Length||51.5 cm [20.3 in]|
|Product Width||45 mm [1.8 in]|
|Weight of Product||30.5 g [1.1 oz]|
|Package Height||10 mm [0.4 in]|
|Package Length||22 cm [8.7 in]|
|Package Width||19.8 cm [7.8 in]|
|Shipping (Package) Weight||56 g [2 oz]|
|What's in the Box|
|Included in Package||1 - USB 3.1 to SATA 2.5" HDD adapter cable|
|1 - quick start guide|
Get ultra-fast access to data by connecting a 2.5" SATA SSD/HDD to your laptop’s USB-C port
Connect a 2.5” or 3.5” SATA SSD/HDD to your USB-C enabled computer, with this USB 3.1 adapter cable
SATA to USB Adapter Cable | SATA III 6Gbps | 2.5" or 3.5" SSD or HDD | Portable
USB 3.0 to eSATA HDD / SSD / ODD Adapter Cable - 91cm eSATA Hard Drive to USB 3.0 Adapter Cable - SATA 6 Gbps
Connect an eSATA storage device to a USB 3.0 port on your laptop or desktop
Quickly and easily connect SATA and/or IDE hard drives through USB 2.0
SATA to USB Adapter Cable | SATA III 6Gbps | 2.5" SSD or HDD | USB 3.0 | Portable
Connect a 2.5in / 3.5in SATA or IDE Hard Drive through a USB 3.0 Port
Connect 7 high-performance devices to your computer or Mac with this compact and rugged hub
Industrial-grade | 15kV Air | 8kV Contact | Metal | Mountable | DIN Rail | 5 Gbps
Add 7 external, USB 3.0 ports to a computer from a single USB connection
Industrial-grade | 8kV Air | 4kV Contact | Metal | Mountable | 5 Gbps
Industrial-grade | 15kV Air | 8kV Contact | Metal | Mountable | DIN Rail | 5 Gbps
4 Port USB 3.0 Hub plus 3 Dedicated USB Charging Ports (2 x 1A & 1 x 2A) - Wall Mountable Metal Enclosure
Add 4 USB 3.0 hub ports, plus 3 dedicated USB charging ports (7 total) through a single USB 3.0 host connection
Add four USB 3.0 (5Gbps) ports to your laptop, including three USB Type-A charge-and-sync ports, and one USB Type-C port
Add 2x USB 3.0 and 4x USB 2.0 ports to a computer, externally through a single USB 3.0 connection
Add ten USB 3.0 ports, including two charging downstream ports, to your computer
Add a 4-port SuperSpeed USB 3.0 Hub to the 3.5" front bay opening of a computer case
Add four USB 3.0 ports to your computer, plus fast-charge your mobile device
Add seven USB 3.0 ports and two USB fast-charge ports to your computer
Add four external USB 3.0 ports and phone charging capability to your laptop with this portable hub
Frequently Asked Questions
Before You Buy
The hard drive adapter requires power from your system's USB port. Although you can plug in any standard SATA drive, USB ports only supply a limited amount of power and are not able to power all of the SATA drives plugged into the cable.
As a general rule, the hard drive adapter only supports 2.5 in. hard drives (HDD) and solid state drives (SSD). 3.5 in. drives typically require a 12V power connection, which is not provided by the USB port or the hard drive adapter.
The power capabilities of the USB port combined with the power requirements of the attached drive will determine if the hard drive adapter will work in your setup. The power (in mA) supplied by the USB port must be greater than the requirements of the drive.
If you are using a USB 2.0 port, your port will only be able to supply a maximum of 500 mA (0.5 A). If you are using a USB 3.0 port, your port will be able to supply a maximum of 900 mA (0.9 A).
You can usually find the power requirements of your drive in the technical specifications on the label of the drive or on the manufacturer's website.
Yes, this device supports the TRIM command. If the OS issues a TRIM command, the command will be passed to the connected device.
This device does not support the ATA Packet Interface (ATAPI) protocol. ATAPI is required for optical drives, including CD-ROM drives, DVD-ROM drives, and Blu-ray players. Because this device does not support ATAPI, optical drives are also not supported over any IDE, SATA, or eSATA connections.
For a list of products that do support ATAPI, refer to the following FAQ: https://www.startech.com/faq/hard_drive_controllers_atapi_support.
USB 3.1 is the most recent version of the USB (Universal Serial Bus) standard for connecting computers and electronic devices. It is capable of data transfer speeds up to 10Gbps, and while it can use the USB-C connector type, it can also use a variety of other connector types. To achieve USB 3.1 transfer speeds, your USB host connection, cables, and device must all support USB 3.1. USB 3.1 is also known as USB 3.1 Gen 2 (10Gbps).
USB 3.0 is capable of data transfer speeds up to 5Gbps. USB 3.0 is also known as USB 3.1 Gen 1 (5Gbps).
USB 3.1 is backwards compatible with USB 3.0 and USB 2.0, except in the following scenarios:
- USB-B 3.1 cables are not compatible with USB-B 2.0 ports.
- Unless you use an adapter, USB-C ports or cables will not work with USB-A or USB-B ports or cables.
- Devices that require USB 3.1 transfer speeds of 10Gbps might not work with USB 3.0 or USB 2.0, or you might experience lower transfer speeds and impacted performance.
- Bus-powered USB devices that requires more power than what USB 2.0 can provide are not compatible with USB 2.0.
To transfer data at speeds of 10Gbps, you need to confirm that the following components in your setup support USB 3.1:
- The USB host connection
- The USB cable
- The USB device and any subcomponents (for example, a hard drive docking station and the hard drives in the docking station)
Note: USB 3.1 is also known as USB 3.1 Gen 2 (10Gbps). Devices that support USB 3.1 should have the USB 3.1 symbol on them. If the USB 3.1 symbol does not appear on your USB source or device, refer to the information provided by the manufacturer to confirm whether the USB source or device support USB 3.1.
The included USB cable for this USB 3.1 Gen 2 device has been tested and verified to perform at USB 3.1 Gen 2 speeds of 10Gbps.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.