4 Drive 3.5in Trayless Hot Swap SATA Mobile Rack Backplane
Hot swap up to four 3.5in SATA hard drives in seconds
Product ID: HSB430SATBK
- Holds up to four SATA drives across three 5.25" bays
- Trayless design: drives are not mounted into separate trays/enclosures
- Internal rubber shock absorbers
- Solid aluminum construction
- 10,000+ insertion rating
- Power and Activity LEDs for each drive
- Support for SATA revision I/II/III (1.5/3.0/6.0 Gbps)
- Supports 3.5" form factor SATA hard drives
- Plug-and-Play and Hot-Swap compatible
Overview
This 4 Bay SATA Mobile Rack lets you swap between 3.5in Serial ATA (SATA, SATA II, SATA III-6Gbps) hard drives in seconds.
A time saving storage solution, the mobile rack offers four trayless SATA hard drive bays, allowing you to hot swap Serial ATA hard drives but avoid having to mount the drives to trays for deployment or unfasten them for replacement.
To maximize performance and utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with a compatible controller.
Supporting up to four hard drives, the mobile SATA hot swap rack only takes up three 5.25in drive bays inside a host computer - maximizing space-efficiency within the computer. The mobile rack/backplane is fully compatible with RAID installations to ensure maximum performance and versatility for enhanced storage applications.
Using Terabyte hard drives? Don’t expose your Hard Drive and valuable data to unnecessary heat!
The HSB430SATBK has two built-in 40mm fans that re-distribute the heat build-up generated as a result of typical drive operation. This feature is especially important for larger volume storage drives, and faster “spinning" drives (i.e 7200 RPM), as it can help optimize drive operability and in turn preserve stored data integrity.
The StarTech.com Advantage
- Quickly and easily install or remove hard drives without having to open the chassis with the innovative trayless design
- Rubber shock absorbers, a solid aluminum construction and 10,000+ insertion rating ensures longevity from both the drives and bay
- Maximize performance, with file transfer speeds up to 6Gbps when paired with SATA III HDD and controller
Applications
Add additional hot-swap bays to a server or workstation computer
Replace or upgrade old IDE backplane with a SATA backplane
System builders who need to image many drives simultaneously and quickly
Environments where drives need to be replaced/removed regularly, without external protection for the drives required after removal
Be able to replace/remove individual drives from a storage array with minimal or no system down time
Technical Specifications
| Product Numbers | ||
|---|---|---|
| Ingram Finland | V930657 | |
| UPC Code | 065030822312 | |
| Warranty Information | ||
|---|---|---|
| Warranty | 2 Years | |
| Hardware | ||
| Compatible Drive Types | SATA | |
| Drive Size | 3.5in | |
| Fan(s) | Yes | |
| Fans | 2 - 40 mm | |
| Number of Drives | 4 | |
| Performance | ||
| Hot Swap Capability | Yes | |
| Insertion Rating | 10, 000+ Cycles | |
| Noise Level | 24 dBA | |
| Connector(s) | ||
| Drive Connectors | 4 - SATA (7 pin, Data) Receptacle | |
| 4 - SATA Power (15 pin) Receptacle | ||
| Host Connectors | 4 - SATA (7 pin, Data) Plug | |
| 4 - SATA Power (15 pin) Plug | ||
| Software | ||
| OS Compatibility | OS independent; No software or drivers required | |
| Indicators | ||
| LED Indicators | 4 - Drive Activity | |
| 4 - Drive Power | ||
| Environmental | ||
| Humidity | Operating - 5~85% RH Non-condensing Storage - 5~95% |
|
| Operating Temperature | 0°C to 50°C (32°F to 122°F) | |
| Storage Temperature | 0°C to 50°C (32°F to 122°F) | |
| Physical Characteristics | ||
| Color | Black | |
| Enclosure Type | Aluminum and Plastic | |
| Product Height | 127 mm [5 in] | |
| Product Length | 194 mm [7.6 in] | |
| Product Weight | 11 kg [24.3 lb] | |
| Product Width | 146 mm [5.7 in] | |
| Packaging Information | ||
| Shipping (Package) Weight | 2.1 kg [4.6 lb] | |
| What's in the Box | ||
| Included in Package | 1 - 5.25" Tray-Less SATA Hot-Swap Bay | |
| 4 - SATA cable | ||
| 4 - SATA to LP4 Molex + LED Cable | ||
| 1 - Screw kit | ||
| 1 - Instruction Manual | ||
No additional drivers or software required.
Certifications
Related Products
5.25in Trayless Hot Swap Mobile Rack for 3.5in Hard Drive
Hot-swap any 3.5in SATA hard drive easily from any computer with a 5.25in bay
