12in LP4 to 2x SATA Power Y Cable Adapter
Power two SATA drives from a single LP4 power supply connector.
Product ID: PYO2LP4SATA
This 12in LP4 to SATA Power Y Cable Adapter features two Serial ATA power (female) connectors and one LP4 male connection - a reliable solution that lets you power two SATA drives using a single LP4 connection to the computer power supply.
This durable LP4/SATA Y cable adapter is 1ft in length, giving you enough cable slack to position drives as needed within the computer case while saving the cost and hassle of upgrading a power supply for compatibility with Serial ATA drives.
Expertly designed and constructed of top quality materials, the LP4/SATA Power cable is backed by StarTech.com's Lifetime Warranty.
The StarTech.com Advantage
- Power two SATA drives using a single LP4 connection on the computer power supply
- Easy to use and install
- Backed by StarTech.com's lifetime warranty
|Cable Jacket Type||PVC - Polyvinyl Chloride|
|Connector A||1 - LP4 (4 pin; Large Drive Power) Male|
|Connector B||2 - SATA Power (15 pin) Receptacle|
|Cable Length||304.8 mm [12 in]|
|Product Length||304.8 mm [12 in]|
|Weight of Product||25 g [0.9 oz]|
|Package Height||220 mm [8.7 in]|
|Package Length||0.1 cm [0 in]|
|Package Width||12.8 cm [5 in]|
|Shipping (Package) Weight||33 g [1.2 oz]|
|What's in the Box|
|Included in Package||1 - 12in LP4 to 2x SATA Power Y Cable Adapter|
Frequently Asked Questions
When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.