6in SATA to Left Angle SATA Serial ATA Cable
Make a Left-Angled Connection to your SATA Drive, for Installation in Tight Spaces
Product ID: SATA6LA1
The SATA6LA1 Left Angle (90-degree) SATA Cable features a standard (straight) SATA receptacle as well as a left-angled SATA receptacle, providing a simple 6-inch connection to a Serial ATA drive, with full SATA 3.0 bandwidth support of up to 6Gbps when used with SATA 3.0 compliant drives.
The left-angled SATA connection enables you to plug in your Serial ATA hard drive in hard to reach areas or tight spaces, while the low profile and flexible design of the cable improves airflow and reduces clutter in your computer case, helping to keep the case clean and cool.
Constructed of only top quality materials and designed for optimum performance and reliability this 6" SATA cable is backed by our lifetime warranty.
As an alternative, StarTech.com also offers a 6in Right Angle SATA cable (SATA6RA1), which provides the same simple installation as this left angled SATA cable, but allows the cable to connect to the SATA drive from the opposite direction.
- Installing Serial ATA hard drives, and DVD drives in Small Form Factor computer cases
- Server and storage subsystem applications
- High-end workstation drive installations
- Connections to SATA Drive Arrays
The StarTech.com Advantage
- Left-angled SATA connector easily fits into hard to reach areas and tight spaces, providing flexibility to position your SATA drive as needed within your system case
- Features a thin cable design, which helps reduce clutter and increase airflow within the computer/server case, for optimum system performance
- Backed by StarTech.com lifetime warranty, ensuring a dependable connection
|Cable Jacket Type||PVC - Polyvinyl Chloride|
|Cable Shield Type||Aluminum-Mylar Foil with Braid|
|Number of Conductors||7|
|Type and Rate||SATA III (6 Gbps)|
|Connector A||1 - SATA (7 pin, Data) Receptacle|
|Connector B||1 - SATA (7 pin, Data) Receptacle|
|Cable Length||152.4 mm [6 in]|
|Connector Style||Straight to Left Angle|
|Product Height||1.5 cm [0.6 in]|
|Product Length||152.4 mm [6 in]|
|Product Width||15 mm [0.6 in]|
|Weight of Product||6 g [0.2 oz]|
|Wire Gauge||26 AWG|
|Package Height||15 mm [0.6 in]|
|Package Length||22.5 cm [8.9 in]|
|Package Width||12.5 cm [4.9 in]|
|Shipping (Package) Weight||11 g [0.4 oz]|
|What's in the Box|
|Included in Package||1 - 6in SATA to Left Angle SATA Serial ATA Cable|
This high quality SATA cable is designed for connecting SATA drives even in tight spaces.
Secure latching SATA cable designed for new system boards and SATA hard drives
Connect your external SATA storage devices to your Laptop or desktop.
Make a right-angled connection to your SATA drive, for installation in tight spaces
Frequently Asked Questions
When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Hard disk drive
Hard drive controller (for example, motherboard)
To test your setup components, try the following:
Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.
Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:
Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.
If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.
For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.