Desk-mount Dual-Monitor Arm - Cross Bar - Grommet/Desk Clamp Mount
Double-Monitor Mount | Low-Profile Base | Height Adjustable | For up to 27” Monitors
Product ID: ARMBARDUOG
- Save space by mounting two monitors up to 27” onto a single base (max. weight 17.6 lb. / 8 kg)
- Landscape-to-portrait display rotation (for use in portrait position, the mount supports ultrawide displays with max width of 23"/58.4 cm)
- Work comfortably with adjustable height, +/- 30°tilt, +/- 30°swivel and 360° rotation
This deskmount dual-monitor arm lets you mount two 13” to 27” VESA mount monitors, each weighing up to 17.6 lb. (8 kg), onto a single low-profile base. It gives you flexible desk-clamp or grommet-hole mounting, letting you save space while creating an ergonomic workspace in any office environment.
Free Up Desk Space
With a stable dual-arm design, the double-monitor mount lets you create more usable work space by mounting your monitors side by side on a single base. The screen mount features a flat low-profile back that lets you position your displays against a wall or cubicle wall.
The computer monitor desk mount features adjustable height along the pole. The smooth +/- 30° tilt motion and +/- 30° swivel make it easy to find the optimal viewing angle. You can also rotate your display 360° for portrait or landscape viewing, and make sure your displays are perfectly aligned using the micro-adjustment knob.
The dual-monitor arm is easy to install, with the desk-clamp or grommet mount (hardware included). Integrated cable management keeps your workspace organized. It works well with most desks, including sit-stand workstations.
Boost Productivity with Multiple Monitors
Adding two monitors gives you the extra screen space you need to simplify multitasking and maximize your productivity.
ARMBARDUOG is backed by a 5-year StarTech.com warranty and free lifetime technical support.
- Mount two monitors on a single base to save desk space
- Maximize office space, creating a dual-monitor workstation against a wall or cubicle wall
- Works with sit-stand workstations, using the desk clamp or grommet mount
|# of Displays Supported||2|
|Mounting Options||Desk & Grommet Clamp|
|Mounting Surface Thickness||Desk Clamp: Table Thickness 0.39 - 3.14 in. (10 - 80 mm)
Grommet Clamp: Table Thickness 0.39 - 3.14 in. (10 - 80 mm)
Grommet Mount Hole Size: 0.41 - 1.96 in. (10.5 - 50 mm)
|VESA Hole Pattern(s)||75x75 mm|
|Display Tilt||+ 30° / - 30°|
|Dual-Arm Span||32.87" (835 mm)|
|Maximum Display Size||27in|
|Maximum Height||364 mm [14.3 in]|
|Minimum Display Size||13"|
|Pole Height||14.2" (360 mm)|
|Swivel / Pivot||+30°/ -30°|
|Weight Capacity (Per Display)||8 kg [17.7 lb]|
|Material||Steel, Aluminum and Plastic|
|Product Height||51.5 cm [20.3 in]|
|Product Length||87 cm [34.3 in]|
|Product Width||13.5 cm [5.3 in]|
|Weight of Product||4.9 kg [10.8 lb]|
|Package Height||12 cm [4.7 in]|
|Package Length||47.8 cm [18.8 in]|
|Package Width||24.8 cm [9.8 in]|
|Shipping (Package) Weight||5.7 kg [12.5 lb]|
|What's in the Box|
|Included in Package||1 - Column|
|2 - VESA Adapters|
|2 - Cable-Management Clips (Column)|
|2 - Monitor Arms|
|2 - End Caps|
|2 - Cable-Management Clips (Monitor Arm)|
|2 - End-Cap Screws|
|1 - Desk-Mount Clamp|
|1 - Hex Key|
|1 - Hex Key Screwdriver|
|8 - M4x14 Screws|
|8 - M5x14 Screws|
|8 - Flat Washers|
|1 - Grommet-Mounting Adapter|
|1 - Grommet-Mount Plate|
|5 - Rubber Pads|
|1 - Instruction Manual|
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.