Product ID: LP4SATAFM12
The LP4SATAFM12 SATA to LP4 Power Cable Adapter enables you to power 4-pin Molex devices (i.e. hard drive, DVD-ROM drive, add-in card, etc.) from a SATA power connector on your computer power supply. Offering 12 inches in cable length, the cable allows you to position your devices as needed within the system case.
Constructed of only top quality materials and designed for optimum performance and reliability this 12in SATA to Molex Cable is backed by StarTech.com’s lifetime warranty.
|Connector(s)||1 - Connector A||SATA Power (15 pin)|
|1 - Connector B||LP4 (4 pin; Large Drive Power)|
|Environmental||Operating Temperature||20°C to 80°C (68°F to 176°F)|
|Storage Temperature||24°C to 25°C (75.2°F to 77°F)|
|Packaging Information||Package Height||0,6 mm [0,0 in]|
|Package Length||12,8 cm [5,0 in]|
|Shipping (Package) Weight||23,0 g [0,8 oz]|
|Package Width||22,0 cm [8,6 in]|
|Physical Characteristics||Weight of Product||19,0 g [0,7 oz]|
|Wire Gauge||18 AWG|
|Cable Length||304,8 mm [12,0 in]|
|Product Length||300,0 mm [11,8 in]|
|Product Width||30,0 mm [1,2 in]|
|Product Height||0,8 cm [0,3 in]|
|What's in the Box||1 - Included in Package||12in SATA to LP4 Power Cable Adapter - F/M|
When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.