Product ID: SAS8087S4R50
The SAS8087S4R50 SFF-8087 to 4x SATA Reverse cable features one 36-pin plug (SFF-8087), which fans out to four SATA 7-pin receptacles, providing a reliable solution for connecting a Mini SAS backplane to a SAS / SATA RAID controller or motherboard.
Designed for long-lasting dependability and reliability, the Mini SAS to SATA cable is backed by StarTech.com's lifetime warranty.
Warranty Information | Warranty | Lifetime |
---|---|---|
Connector(s) | 1 - Connector A | SFF-8087 (36 Pin, Internal Mini-SAS) |
4 - Connector B | SATA (7 pin, Data) | |
Packaging Information | Shipping (Package) Weight | 46 g [1,6 oz] |
Package Quantity | 1 | |
Package Length | 22,5 cm [8,9 in] | |
Package Width | 12,5 cm [4,9 in] | |
Package Height | 4 mm [0,2 in] | |
Performance | Type and Rate | SATA III (6 Gbps) |
Physical Characteristics | Weight of Product | 46 g [1,6 oz] |
Color | Red | |
Connector Style | Latching | |
Wire Gauge | 30 AWG | |
Cable Length | 50 cm [19,7 in] | |
Product Length | 50 cm [19,7 in] | |
Product Width | 18 mm [0,7 in] | |
Product Height | 10 mm [0,4 in] | |
What's in the Box | 1 - Included in Package | 50cm SAS Cable - SFF-8087 to 4x Latching SATA Reverse |
We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Hard disk drive
Hard drive controller (for example, motherboard)
SATA cable
To test your setup components, try the following:
Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.
Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:
Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.
If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.
For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.
Check out our review guidelines.