Bi-Directional SATA IDE Adapter Converter

Bi-directional adapter converts IDE to SATA or SATA to IDE

Product ID: PATA2SATA3

2,3 stars (9 reviews) |
  • Bi-Directional support for IDE-to-SATA or SATA-to-IDE communication
  • Compatible with PATA (IDE) 100/133 MBps hard devices
  • Compatible with SATA revision 1/2/3 (1.5/3.0/6.0 Gbps) devices
Your price
€19,99 EUR excl. VAT
€24,19 EUR incl. VAT

The PATA2SATA3 is a bi-directional SATA IDE adapter/converter that lets you connect a Serial ATA drive to a legacy IDE port, or an IDE drive to a SATA motherboard port.

A cost-effective solution for upgrading existing IDE systems to support SATA hard drives or optical drives, the SATA/IDE adapter eliminates the expense of having to purchase a controller card while saving the expansion slot that would be required for card installation.

In addition to SATA hard drive installation, the adapter can be reversed in order to connect older IDE drives to a newer SATA-enabled motherboard, making it easy to retrieve old files from a previous system.

Applications

  • Connect newer SATA drives to an older motherboard with only IDE support
  • Connect an old IDE drive to a new SATA only motherboard to recover the data
  • Technicians who regularly need to work with both types of drives across different types of systems

The StarTech.com Advantage

  • A single, versatile adapter can be used to connect an IDE device to a SATA motherboard or vice-versa without any drivers or software installation
  • Supports not only hard drives, but CD/DVD optical drives as well
  • Backed by a StarTech.com 2-year warranty and free lifetime technical support

Partner Numbers

  • Ingram Micro Belgium 1606950
  • Tech Data - Belgium 4428315
  • UPC 065030836982

Compatibility

  • OS Independent logo
OS independent; No software or drivers required

Specifications

Warranty Information Warranty 2 Years
Connector(s) 1 - Connector Type(s) IDE (40 Pin, EIDE/PATA)
2 - Connector Type(s) SATA (7 pin, Data)
1 - Connector Type(s) SP4 (4 pin, Small Drive Power)
Environmental Operating Temperature 0°C to 70°C (32°F to 158°F)
Storage Temperature -40°C to 150°C (-40°F to 302°F)
Humidity 90% RH
Hardware Number of Drives 1
Drive Size 2.5in & 3.5in
Compatible Drive Types SATA & IDE
Chipset ID SunplusIT - SPIF223A
Indicators 1 - LED Indicators HDD Activity - Green
Power - Red
Packaging Information Package Height 32 mm [1,3 in]
Package Length 14,2 cm [5,6 in]
Shipping (Package) Weight 102 g [3,6 oz]
Package Width 17,3 cm [6,8 in]
Performance Type and Rate SATA I (1.5 Gbps)
Hardware Raid Supported No
Physical Characteristics Weight of Product 20 g [0,7 oz]
Color Black
Material Plastic
Product Length 61 mm [2,4 in]
Product Width 50 mm [2,0 in]
Product Height 11 mm [0,4 in]
Software OS Compatibility OS independent; No software or drivers required
What's in the Box 1 - Included in Package Bi-Directional SATA IDE Converter
SP4 to Dual LP4 Y Power Adapter
SATA Cable
Instruction Manual

Accessories

SATA24RA1

24in SATA to Right Angle SATA Serial ATA Cable

Make a right-angled connection to your SATA drive, for installation in tight spaces

Your price
€3,99 EUR excl. VAT
€4,83 EUR incl. VAT
SATA24

24in SATA Serial ATA Cable

This high quality SATA cable is designed for connecting SATA drives even in tight spaces.

Your price
€3,99 EUR excl. VAT
€4,83 EUR incl. VAT
SATA18RA1

18in SATA to Right Angle SATA Serial ATA Cable

Make a right-angled connection to your SATA drive, for installation in tight spaces

Your price
€3,99 EUR excl. VAT
€4,83 EUR incl. VAT
SATA18POW

18in SATA Serial ATA Data and Power Combo Cable

Power your Internal SATA hard drive from an LP4 connector on your Power Supply

Your price
€5,99 EUR excl. VAT
€7,25 EUR incl. VAT
SATA18

18in SATA Serial ATA Cable

This high quality SATA cable is designed for connecting SATA drives even in tight spaces.

Your price
€2,99 EUR excl. VAT
€3,62 EUR incl. VAT
SATARA36

36in Right Angle SATA Cable

Make a right-angled connection to your SATA drive, for installation in tight spaces

Your price
€3,99 EUR excl. VAT
€4,83 EUR incl. VAT
Discontinued
SATARA24

24in Right Angle SATA Cable

Make a right-angled connection to your SATA drive, for installation in tight spaces

Your price
€1,99 EUR excl. VAT
€2,41 EUR incl. VAT
SATAPOWADAP

6in 4 Pin LP4 to SATA Power Cable Adapter

Power a Serial ATA hard drive from a conventional LP4 power supply connection

Your price
€2,99 EUR excl. VAT
€3,62 EUR incl. VAT
Discontinued
SATAPLATE1

1 Port SATA to SATA Slot Plate Bracket

Add external data connection to any existing SATA controller

Your price
€5,99 EUR excl. VAT
€7,25 EUR incl. VAT
SATA36RA1

36in SATA to Right Angle SATA Serial ATA Cable

Make a right-angled connection to your SATA drive, for installation in tight spaces

Your price
€4,99 EUR excl. VAT
€6,04 EUR incl. VAT
SATA36

36in SATA Serial ATA Cable

Connect and position SATA drives easily - designed for larger cases

Your price
€2,99 EUR excl. VAT
€3,62 EUR incl. VAT

Drivers/Downloads

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Manual(s):

Datasheet

Product Support

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Frequently Asked Questions

Troubleshooting

Note: If you are using an IDE hard drive 1 Gigabyte in size or smaller, refer to the following FAQ: http://www.startech.com/faq/hard_drive_accessories_minimum_ide_hard_drive_size

If you are unable to detect your IDE (PATA) drive using a StarTech.com product, you may need to change the jumper settings on your drive. The jumpers switch the drive between Master, Slave, and Cable Select for most drives. A jumper is a small plastic piece that slides on top of two pins to electrically short them together.

When it does not mention what IDE drive configuration is required or if there is only one drive in the setup, the drive should be configured as Master. If Master is not working, try using the drive in Cable Select.

There is no standard position for the jumpers on IDE drives. On some drives, the jumper diagram is on the label that is on the top of the drive. On other drives, there are markings on the circuit board for CS, MA, and SL, which means a jumper shorts the pins vertically in that position. For more information, refer to the documentation provided by the manufacturer.

Before You Buy

Note: For more information on how to detect an IDE hard drive, visit http://www.startech.com/faq/hard_drive_accessories_ide_detection.

Older IDE drives are not supported by current StarTech.com products. Typically, these drives were made earlier than the mid-to-late 1990s and are smaller than 1 Gigabyte in size.

There are a number of reasons that older IDE drives may not be detected, including the following:

  • The drive uses PIO (Programmed Input/Output) mode and not DMA (Direct Memory Access).

  • The drive is non-ATA or is using an ATA mode that predates the chipset's compatibility (usually older than ATA-4).

  • The sector size is not 512 bytes.

Unfortunately there is no workaround in these situations. An older system or an older IDE controller card must be used to access older IDE drives.

Compliance and safety

Compliance letters

  • RoHS
    • Language: English
  • WEEE
    • Language: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
*Product appearance and specifications are subject to change without notice.

Customer Reviews

(9 reviews)
2,3 out of 5 stars
  • 5 (3)
  • 4 (0)
  • 3 (0)
  • 2 (0)
  • 1 (6)
Tell us what you think of this product.
Need a little help getting started?

Check out our review guidelines.

1 - 9 of 9 Reviews
Sort
(5 Stars)

By: Dan M - 10/17/2014
I bought this adapter to retrieve files from an IDE disk drive that was in an older computer that failed. Not having a system with IDE interface to connect the drive to, I needed the adapter to connect to a system with a SATA drive interface. The adapter worked perfectly. If the system that you intend to use this adapter in does not have a LP4 Molex 4 pin power connector for the IDE drive, you will need a SATA to LP4 Power Cable Adapter - F/M, which is StarTech product ID LP4SATAFM6IN.
| Helpful?
(5 Stars)

Only one that works with newer computers.

By: William - 09/11/2015
Only adapter we found that works with newer model computers. We use it in a classroom environment with removable IDE drives and it works perfectly
| Helpful?
(1 Stars)

Wont work in new HP

By: Southern Guy - 12/16/2017
I bought this adapter to transfer a WD-250GB to a new HP Z240 workstation. It isn't recognized. All cables are connected correctly and the Power Indicator on the Interface is lit. Hard drive spins up, but nothing is recognized by the computer. Not even in the Device Manager. No drivers to update and nothing else to change. I wont give it a Quality rating, since it doesn't work.
| Helpful?
Sam, Customer Service on 30/05/2018 08:23:17
Thank you for sharing your review of our PATA2SATA3. I'm sorry to hear about the issues you had with getting this adapter to work in your setup! Have you had a chance to check "Disk Management" to see if the drive is detected by the computer but isn't initialized? Have you also tried switching the drive between "Master" and "Slave" modes? This adapter is covered by a 2 year warranty and free lifetime technical support. Our Technical Advisors are available 24 hours a day, 5 days a week, to provide support. For further troubleshooting, I recommend reaching out to us at 1-800 265-1844 or www.startech.com/chat

By: Tmd63 - 11/18/2020
Did you set the PATA drive as Master on it's jumpers?
| Helpful?
(1 Stars)

Not workingAs

By: Job77844 - 05/30/2018
As previous user stated, everything connected as manual suggests and HD isn't recognized by PC. All in all useless.
| Helpful?
Brian, Customer Support on 30/05/2018 11:17:44
Thanks for sharing your feedback on our PATA2SATA3. We're very sorry it isn't working correctly and we'd like to help. We would like to know a bit more about your configuration and look into what might be the problem. We have 24 hour support from Monday to Friday. You can call us toll-free at 1-800-265-1844 or chat live with us at StarTech.com/Chat.
(5 Stars)

Worked fine. Just needed to fix my HDD

By: Andre721 - 06/29/2018
I bought this because I had an old IDE hard drive laying around for years that I needed to clean the data out of. Here is something to keep in mind... if you are connecting an old IDE drive up, be sure that the jumpers are set properly (if applicable). For some odd reason, one of my jumpers was in the wrong position, so I thought the adapter wasn't working at first. Once I noticed the jumper and fixed it, everything worked fine.
| Helpful?
(1 Stars)

A little misleading

By: WayneS - 07/14/2018
Have not been able to use this as you need a 40 ide male connector to plug it into if you cant plug into the motherboard.
| Helpful?
Malcolm, Customer Support on 16/07/2018 17:44:32
We're sorry to hear the PATA2SATA3 didn't work for your application. To connect newer SATA drives to an older motherboard with only IDE support, an available IDE port or male connection is required since our adapter has a female IDE connector. Feel free to contact us directly if you have any further questions. Malcolm, StarTech.com
(1 Stars)

Moronic installation guide

By: I cant rate I cant use it - 09/06/2019
The guide mentions setting the DIP switch according to a diagram (step 1) The diagram does not exist. In step (4) it instructs the user to connect computer power supply to SATA hard drive but does not say with what or how?????????
| Helpful?
Matt, Customer Support on 13/09/2019 16:02:43
We apologize for any difficulties you've experienced when installing our PATA2SATA3. The DIP switch diagram described can be found on the left side of the first page of the manual here: https://sgcdn.startech.com/005329/media/sets/PATA2SATA3_Manual/PATA2SATA3.pdf. Also, step 4 is referencing the power cables that come built into the power supply in the PC. There should be no adapter cables or other cables needed which is why it does not specify any extra steps there. If you require assistance, we'd be happy to help with this. You can contact us at www.startech.com/support where our Technical Advisors are available 24 hours a day, 5 days a week to provide support.
(1 Stars)

Not quite as good as it appears

By: CW33514 - 11/05/2019
Could not get it to work using a 40pin / 80 wire ribbon cable. I bought it to share an existing IDE connection with a SATA disc drive. But it does not work, even with just the SATA disc connected via the ribbon cable and this product. Dip switch settings for Master or Slave make no difference. They appear redundant anyway, as tech support say the product cannot operate with another disc drive connected. Disappointed. I have not tried to use the product to connect a IDE disc drive to a SATA PC port.
| Helpful?
Matt, Customer Support on 07/11/2019 16:47:03
We're sorry to hear that our PATA2SATA3 is not working with your SATA drive. This adapter has a female IDE connection which is the same connector that most IDE ribbon cables use and the adapter is actually designed to connect directly to the IDE port on your motherboard. We recommend installing the adapter directly to the motherboard instead of through a ribbon cable. If you require any help with this, you can contact us for live assistance at www.startech.com/support where our Technical Advisors are available 24 hours a day, 5 days a week to provide support.
(1 Stars)

Didn't work with Samsung DVD drive

By: Rick it - 04/05/2020
Tried to hook up a Samsung internal dvd drive. It didn't work with any settings. Disappointed
| Helpful?
Matt, Customer Support on 08/04/2020 16:25:00
We're sorry to hear about the difficulties you've experienced using our PATA2SATA3 with your Samsung DVD drive. This adapter allows a SATA device to connect to an IDE motherboard or an IDE device to connect to a SATA motherboard and should be compatible with Samsung drives but it requires the SP4 power to be connected to the adapter. We'd be happy to speak with you to help investigate the issue if you require assistance. You can contact us at www.startech.com/support where our Technical Advisors are available 24 hours a day, 5 days a week to provide support.
Feedback Back to top