Product ID: NETRS232_1EU
Take your serial peripherals to new lengths. With this one-port Ethernet-to-Remote Serial interface converter, your RS-232 serial devices can be placed anywhere on your TCP/IP Ethernet WAN/LAN and still perform as if they were right beside you. It even works over the Internet!
Even at the longest distances, control of your serial devices will be right at your fingertips: the remote serial ports appear alongside your local serial ports in your Windows device manager.
NETRS232_1 is designed to function seamlessly with your other serial ports for totally transparent operation. Your serial equipment – card scanners, access keypads, bar code scanners, and more – will operate as smoothly as if the serial ports were right inside your computer. For industrial automation, security, Point of Sale, or any time you need reliable, long-range serial communications, the NETRS232_1 delivers superior performance in any environment.
|Warranty Information||Warranty||2 Years|
|Connector(s)||1 - Connector Type(s)||DB-9 (9 pin, D-Sub)|
|Environmental||Operating Temperature||0° to 70° C|
|Packaging Information||Package Length||23,6 cm [9,3 in]|
|Package Width||11 cm [4,3 in]|
|Package Height||62 mm [2,4 in]|
|Shipping (Package) Weight||0,5 kg [1,1 lb]|
|Performance||Max Baud Rate||115.2 Kbps|
|Supported Protocols||RS-232, TCP/IP, UDP, HTTP, ICMP, TFTP|
|Product Length||13 cm [5,1 in]|
|Product Width||95 mm [3,7 in]|
|Product Height||4,4 cm [1,7 in]|
|Weight of Product||227 g [8,0 oz]|
|Power||Power Source||AC Adapter Included|
|Output Voltage||12V DC|
|Output Current||200 mA|
|Center Tip Polarity||Positive|
|Software||OS Compatibility||Windows® 8 / 8.1 (32/64bit), 7 (32/64), XP (32), 2000 (32)
Windows Server® 2008 R2
Linux 2.4.x and up
|Special Notes / Requirements||Note||All modes other than Driver Mode operate independently of the operating system|
|What's in the Box||1 - Included in Package||Serial over IP Unit|
Convert a DB9 male port to a DB25 male port
Convert a DB9 9-pin male connector into a DB9 9-pin female connector
This device's default static IP address is 192.168.0.35.
When experiencing either issue, complete the following:
There are several different ways that you can reset these devices to the factory settings. The following steps list the methods in order of easiest to hardest to perform.
Use the included software
Use the web interface
Note: You can reset individual ports by going into Port Configuration and clicking the Reset button underneath Port Reset.
Reset the hardware
This is normal behavior. The software says connecting when data is being transferred. When data is not being transferred, the software says disconnected. The disconnected message does not mean that the device is not working.
If you are experiencing any issues in Windows 8 with the IP-Extender Manager software, complete the following:
You should not upgrade your device's firmware if you do not have any issues with the functionality of your device. The only time you should consider an upgrade is if you are experiencing a problem with the device, and you have confirmed that the firmware addresses this problem. You can confirm this is the case by reviewing the documentation included with the firmware or by consulting with our Technical Support team. Incorrectly upgrading firmware can result in diminished performance so it is best to contact StarTech.com if you would like to perform this operation.