Product ID: USB1000IP
This Gigabit USB-over-IP device server offers a simple and convenient way to extend and share a USB device over long distances, and it works with multiple users connected to your network. Plus, the device server supports Gigabit (1000Mbps) speeds, so your connected devices function faster than traditional 10/100Mbps device servers.
The versatile device server connects directly to your PC, or it works with your existing network devices (for example, hubs, routers, switches) so it can easily integrate into your current network infrastructure. It’s ideal for connecting and sharing USB devices (for example, card readers, digital cameras, webcams, printers, and scanners) with multiple networked users. Plus, you can use multiple device servers on the same network, letting you connect and share even more USB peripherals.
The USB-over-IP device server includes Windows based software that provides a simple interface to connect, monitor, and control the connected device over your local area network (LAN). Plus, the software communicates directly with the device server, so it can be used in Virtual Machine (VM) environments if you have multiple VMs sharing the same set of hardware.
The USB1000IP is backed by a StarTech.com 2-year warranty and free lifetime technical support.
|Warranty Information||Warranty||2 Years|
|Connector(s)||1 - Connector Type(s)||RJ-45|
|USB Type-A (4 pin) USB 2.0|
|Environmental||Operating Temperature||5°C to 50°C (41°F to 122°F)|
|Storage Temperature||-25°C to 70°C (-13°F to 158°F)|
|Humidity||20~80% RH Operating
15~90% RH Storage
|Industry Standards||IEEE 802.3-2002|
|Chipset ID||Elite Silicon - E3868M1|
|Indicators||1 - LED Indicators||Ethernet Link|
|Packaging Information||Package Height||47 mm [1,9 in]|
|Package Length||16 cm [6,3 in]|
|Shipping (Package) Weight||355 g [12,5 oz]|
|Package Width||22 cm [8,7 in]|
|Performance||Maximum Data Transfer Rate||USB: 480Mbps
|Physical Characteristics||Weight of Product||37 g [1,3 oz]|
|Product Length||80 mm [3,1 in]|
|Product Width||40 mm [1,6 in]|
|Product Height||20 mm [0,8 in]|
|Power||Power Source||AC Adapter Included|
|Input Voltage||100 - 240 AC|
|Output Voltage||5 DC|
|Center Tip Polarity||Positive|
|Power Consumption (In Watts)||15|
|Software||OS Compatibility||Windows® 10 (32/64), 8 / 8.1(32/64), 7(32/64), Vista(32/64), XP(32/64)|
|Special Notes / Requirements||Note||Does not support the connection of USB Hubs|
|What's in the Box||1 - Included in Package||Gigabit USB IP Device Server|
|Universal Power Adapter (US/UK/EU)|
Add a 14-in-1 high capacity external memory card reader to any USB computer
Connect both an IDE and SATA hard drive to a computer through USB 2.0
Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).
To install the USB Server software:
Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).
Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.
Confirm that the extender is on the same network as your computer. If you are using a network with DHCP, you do not need to configure anything further.
If you are using an Ethernet cable to connect to the unit or you are using a network without DHCP, you need to change the IP address on your computer to the default IP network of the IP device server. Change the IP address of your system to 192.168.1.XXX, where XXX is a number between 1 and 49.
Note: The default IP address of the extender is 192.168.1.50 on the default subnet mask of 255.255.255.0.
Your extender is detected by the USB Server software when the software is launched.
Note: It may take a few minutes for the server to appear in the software.
When the extender appears in the list (for example, USB2HDMI), click either the display or media device associated with the server. Click on one of the devices and then click Connect Device.
When the USB Server software configuration is complete, the display and media devices are connected to your system as though the devices are installed locally. By default, Windows creates an extended desktop for the display, which you can reconfigure in the control panel.
If the device is not detected in the USB Server software, complete the following:
You should not upgrade your device's firmware if you do not have any issues with the functionality of your device. The only time you should consider an upgrade is if you are experiencing a problem with the device, and you have confirmed that the firmware addresses this problem. You can confirm this is the case by reviewing the documentation included with the firmware or by consulting with our Technical Support team. Incorrectly upgrading firmware can result in diminished performance so it is best to contact StarTech.com if you would like to perform this operation.
Check out our review guidelines.