Gigabit Cat 6 Crossover Ethernet Adapter

Convert a Cat 6 Ethernet cable into a Gigabit capable Crossover cable

Product ID: C6CROSSOVER

0 stars (0 reviews) |
  • 1x RJ45 female connector
  • 1x RJ45 male connector
Your price
€8,99 EUR excl. VAT
€11,15 EUR incl. VAT

This durable Cat 6 Crossover adapter converts any straight through Cat 6 Ethernet cable to an Ethernet crossover cable.

Built with all four pairs crossed, the adapter provides full Gigabit throughput performance.

Applications

  • Convert a Cat 6 Ethernet cable into a Gigabit capable Crossover cable

The StarTech.com Advantage

  • Guaranteed reliability, with StarTech.com’s lifetime warranty

Partner Numbers

  • Ingram Finland V930813
  • UPC 065030831970

Specifications

Warranty Information Warranty Lifetime
Connector(s) Connector A 1 - RJ-45
Connector B 1 - RJ-45
Hardware Number of Conductors 8
Cable Jacket Material PVC - Polyvinyl Chloride
Packaging Information Package Height 19 mm [0,7 in]
Package Length 12,5 cm [4,9 in]
Shipping (Package) Weight 0,0 kg [0,0 lb]
Package Width 9 cm [3,5 in]
Physical Characteristics Weight of Product 12 g [0,4 oz]
Color Red
Conductor Type Stranded Copper
Product Length 4,5 cm [1,8 in]
Product Width 15 mm [0,6 in]
Product Height 1,5 cm [0,6 in]
What's in the Box Included in Package 1 - Gigabit Cat 6 Crossover Ethernet Adapter

Drivers/Downloads

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Datasheet

Product Support

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Frequently Asked Questions

Before You Buy

In order to work properly, straight-through Ethernet cables must be terminated with the same pin configurations on either end. Two different wiring standards exist for wired Ethernet: T568A (A wiring) and T568B (B wiring). A and B wiring offer the same electrical properties and either standard can be used. StarTech.com uses the T568B wiring standard for all of the straight-through Ethernet cables.

Note: For more information about the differences between straight-through and crossover Ethernet cables, refer to the following FAQ: http://www.startech.com/faq/network_cables_straight_through_vs_crossover.  

Wiring Pinout Table

Pin T568A T568B
1 white/green white/orange
2 green orange
3 white/orange white/green
4 blue blue
5 white/blue white/blue
6 orange green
7 white/brown white/brown
8 brown brown

For products related to this article, click here.

Patch cables can come in two different wiring applications: straight-through and crossover. The type of cable that is required depends on the application. Straight-through Ethernet cables are the most commonly used.

Cable type Typical application
Straight-through
  • Between a computer and a modem, router, or switch
  • CAT5/CAT6 peripheral extenders
  • Between other dissimilar networking equipment
Crossover
  • Between two computers
  • Between two similar networking devices

Crossover cables use two different wiring standards: one end uses the T568A wiring standard, and the other end uses the T568B wiring standard. To determine if you have a straight-through or crossover cable, compare the Ethernet cables to see if the colors are wired in the same order on each end. For more information on Ethernet wiring standards, refer to the following FAQ: http://www.startech.com/faq/network_cables_a_vs_b_pinout.

Many modern network devices support Auto MDI-X, which automatically negotiates which wiring standard is required. For example, a computer with Auto MDI-X can use either a straight-through or crossover cable for any application.

Stranded Ethernet cables are flexible and are often used as patch cables, short cables that are ideal for connecting a computer to a wall outlet or to a router.  Solid Ethernet cables are rigid but have better signal strength.  These cables are ideal for use behind walls and in longer cable runs.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
*Product appearance and specifications are subject to change without notice.

Customer Reviews

(0 reviews)
0 out of 5 stars
  • 5 (0)
  • 4 (0)
  • 3 (0)
  • 2 (0)
  • 1 (0)
Tell us what you think of this product.
Need a little help getting started?

Check out our review guidelines.

Feedback Back to top