Product ID: LSATARND6R1
The LSATARND6R1 6-inch Round SATA cable is a high quality SATA 6Gbps cable that features a rounded design to help improve airflow inside a computer or server case by providing less resistance as air passes around the cable, in turn helping to ensure cooling for improved system performance.
The cable features one straight latching SATA connector, as well as a right-angled latching SATA connector that makes it easier to connect your SATA drive even if space near the drive is limited. The latching connectors also ensure secure connections to SATA hard drives and motherboards that support this feature.
Designed for optimum performance and reliability, this 6" SATA cable is backed by our lifetime warranty.
|Connector(s)||Connector A||1 - SATA (7 pin, Data)|
|Connector B||1 - SATA (7 pin, Data)|
|Hardware||Cable Jacket Material||PVC - Polyvinyl Chloride|
|Packaging Information||Shipping (Package) Weight||0,0 kg [0,0 lb]|
|Package Length||23,2 cm [9,1 in]|
|Package Width||12,5 cm [4,9 in]|
|Package Height||10 mm [0,4 in]|
|Performance||Type and Rate||SATA III (6 Gbps)|
|Physical Characteristics||Product Height||0 cm [0,0 in]|
|Weight of Product||6 g [0,2 oz]|
|Product Width||0 mm [0,0 in]|
|Connector Style||Straight to Right Angle|
|Wire Gauge||30 AWG|
|Cable Length||152,4 mm [6,0 in]|
|Product Length||15,2 cm [6,0 in]|
|What's in the Box||Included in Package||1 - 6in Latching Round SATA to Right Angle SATA Serial Cable|
When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Hard disk drive
Hard drive controller (for example, motherboard)
To test your setup components, try the following:
Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.
Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:
Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.
If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.
For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.