Product ID: POEINJ1GI
The POEINJ1GI Industrial Gigabit PoE+ Injector provides power and data connectivity to a Gigabit PoE-compliant device over standard Ethernet cabling at distances of up to 330ft (100m), and offers redundant, wide-range DC power inputs. This injector allows you to easily connect a PoE-powered device (PD) to a non-PoE LAN switch, avoiding the cost of upgrading your switch to a PoE-enabled model.
Providing seamless power failover in the event of power dips or failures, the injector features redundant 20-57V DC (nominal 24/48V DC) terminal block power inputs. The internal DC-DC converter provides the PoE injector with high voltage output from a low voltage input (<24V DC). When used with multiple power sources, the injector also supports alarm relay contacts, which can be wired to your existing alarm circuit to give you instant notice when a power disruption occurs.
Fully compliant with IEEE 802.3at / 802.3af, the injector provides a 10/100/1000Mbps port with support for up to 30 Watt max output, and up to 60 Watts output for non-standard PoE devices.
To ensure dependable performance in harsh environments this power over Ethernet injector features a rugged, IP-30 case design with flexible DIN rail or wall-mountable installation options.
Backed by a 2-year StarTech.com warranty and free lifetime technical support.
|Warranty Information||Warranty||2 Years|
|Connector(s)||2 - Connector Type(s)||RJ-45|
|1 - Connector Type(s)||Terminal Block (6 Wire)|
|Environmental||Operating Temperature||0°C to 60°C (32°F to 140°F)|
|Storage Temperature||-40°C to 85°C (-40°F to 185°F)|
|Humidity||5~95% RH (Non-Condensing)|
EN61000-4-8 (PMF, Magnetic Field)
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
|Industry Standards||IEEE 802.3af PoE, IEEE 802.3at PoE+
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T
|Indicators||2 - LED Indicators||Power|
|1 - LED Indicators||Fault|
|Packaging Information||Package Height||75 mm [3,0 in]|
|Package Length||23 cm [9,1 in]|
|Package Width||18,5 cm [7,3 in]|
|Shipping (Package) Weight||878 g [31,0 oz]|
|Performance||Maximum Data Transfer Rate||1Gbps|
|Max Distance||100 m / 330 ft|
|Surge Protection||EN61000-4-2 (ESD)
|General Specifications||Power Output:
Standard PoE+: 30 Watts max
Non-Standard PoE: 60 Watts max
|Product Length||14,2 cm [5,6 in]|
|Product Width||10,6 cm [4,2 in]|
|Product Height||3,9 cm [1,5 in]|
|Weight of Product||637 g [22,5 oz]|
|Power||Power Source||Terminal Block|
|Input Voltage||20 ~ 57 DC|
|Special Notes / Requirements||Patents and Licenses||The following patents are licensed for this product. This list might not be all inclusive.
• United States Patent No. 5,406,260 (expired)
• United States Patent No. 6,650,622
• United States Patent No. 7,457,250
• United States Patent No. 8,155,012
• United States Patent No. 8,902,760
• United States Patent No. 8,942,107
• United States Patent No. 9,019,838
• United States Patent No. 9,049,019
• United States Patent Application No. 14/695,456
• United States Patent Application No. 14/726,940
|What's in the Box||1 - Included in Package||Gigabit PoE+ Injector|
|DIN Rail Kit|
|Wall Mount Bracket|
Connect to, configure and remotely manage an RS-232 serial device over an IP network
Make Gigabit network connections using this high quality Cat6 Cable
If an extra power source is not connected to either the PWR1 or PWR2 terminal blocks on the POEINJ1G1, the fault LED lights up, regardless of whether or not the unit is working properly. The fault LED is lit up because the POEINJ1GI does not detect a redundant power source. To avoid the fault LED being lit up, connect a power source to both PWR1 and PWR2.