StarTech.com

USB 2.0 opname apparaat voor HDMI Video - compacte externe capture card - 1080p

Neem op uw pc een HDMI-videobron op met dit compacte externe opname apparaat

Productcode: USB2HDCAPM

  • Naadloze beeldkwaliteit met 1080p video-opname met 30 f/s
  • Maximale mobiliteit met een USB gevoed opnameapparaat en een compact en lichtgewicht design
  • Breed ondersteunde output van videobestanden met software dat codeert met H.264
Bekijk meer
  • Ondersteunt 2-kanaals stereo audio
  • Ondersteunt NTSC- en PAL-systemen
  • Ondersteunt een breedte/hoogte ratio van 16:9 en 4:3
€ 139,99 EUR exc BTW
€ 169,39 EUR inc BTW

Overzicht

Met dit USB 2.0 video-opnameapparaat kunt u hoogwaardige 1080p HD-video en stereoaudio op uw computersysteem opnemen. Met H.264 encoding is dit de perfecte oplossing voor de opname van high-definition video, die u vervolgens kunt bewerken, compileren en archiveren.

Het opnameapparaat wordt via USB gevoed en heeft een compact en lichtgewicht design voor maximale mobiliteit.

Compact design voor draagbaar gemak

Het opnameapparaat is zeer mobiel, zodat het gemakkelijk in uw laptoptas of zelfs in uw broek-/jaszak past. Het heeft geen externe netadapter nodig, en is dus perfect voor gebruik onderweg zoals het opnemen van conferenties of lezingen. Het externe opnameapparaat is ook prima geschikt voor algemeen entertainment. 

HDMI-video-opname voor vele verschillende toepassingen

Als u video wilt opnemen vanaf uw HDMI-computer voor het maken van trainingvideo's of video's voor telefonische vergaderingen, dan is dit USB-opnameapparaat perfect voor u, met ondersteuning van 1080p video met 30 frames/sec.

Uw video-opnames zijn niet beperkt tot een desktop of laptop, maar u kunt high-definition video ook opnemen vanaf elk HDMI-apparaat, zoals een beveiligingssysteem of POS-terminal voor zakelijke toepassingen.

Geïntegreerde H.264 codering bespaart u tijd

Het opnameapparaat codeert video in H.264 -- 's werelds meest geaccepteerde videocode. Omdat uw video-opnames gegarandeerd compatibel zijn met bijna elk apparaatplatform, bespaart u de tijd die anders nodig zou zijn voor het bewerken of omzetten in een bruikbaar formaat. H.264 wordt ook ondersteund door de meeste populaire softwareprogramma's inclusief Adobe Premiere® en Windows Media® Encoder.

Met de meegeleverde software kunt u niet alleen video's opnemen en exporteren, maar ook screenshots maken, opnames inplannen en uw videobron direct streamen via het internet, met online services zoals Twitch.

NB: 

  • Dit video-opnameapparaat is niet geschikt voor het opnemen van digitaal gecodeerde inhoud.
  • De maximale refresh rate waarmee dit apparaat kan opnemen bij een 1080p resolutie is 30 Hz. Als een 1080p videobron met een hogere refresh rate wordt gebruikt (zoals bij 60 of 50 Hz), zal de refresh rate in het geëxporteerde videobestand zijn verminderd. 

De USB2HDCAPM wordt gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.

Toepassingen

Neem video op voor trainings- en opleidingsdoeleinden

Stream video's live online met streaming-diensten zoals twitch

Gebruik het met de ST122HDMILE HDMI-splitter om HD-videogames met 60 frames per seconde op te nemen, terwijl u speelt op een ander scherm

Converteer analoge naar digitale video bij professionele videoarchiveringsapplicaties

Technische specificaties

Garantie
Garantie 2 Years
Hardware
Audio Ja
AV-ingang HDMI
AV-uitgang USB
Chipsetcode Mstar - MST3367CMK-LF-170
Industriestandaarden NTSC, PAL-M, PAL-60, PAL
Videocodering: MPEG4/H.264
Prestaties
Audiospecificaties 2-kanaals HDMI audio
Maximale digitale resoluties 1080p/30/50/60
Video Output at 1080p/30
MTBF 2.328.329 uur
Ondersteunde resoluties 1080i/p, 720p, 576i/p, 480i/p
Connector(en)
Connector A 1 - HDMI (19-polig) Vrouwelijk Input
Connector B 1 - USB Mini-B (5-polig) Vrouwelijk Output
Software
Besturingssystemen Windows® 10 (32/64), 8 / 8.1 (32/64bit), 7 (32/64bit), Vista(32/64), XP (32/64)
Voeding
Inclusief voedingsadapter Gevoed via USB
Fysieke eigenschappen
Breedte product 27 mm [1.1 in]
Gewicht product 20 g [0.7 oz]
Hoogte product 14 mm [0.6 in]
Lengte product 65 mm [2.6 in]
Verpakkingsinformatie
Verzendgewicht (verpakt) 0.2 kg [0.3 lb]
Wat wordt er meegeleverd
Meegeleverd 1 - USB 2.0 HDMI video-opnameapparaat
1 - USB-kabel
1 - Verkorte handleiding

Compatibiliteit

Bekijk volledige OS compatibiliteit
Windows® 10 (32/64), 8 / 8.1 (32/64bit), 7 (32/64bit), Vista(32/64), XP (32/64)

Certificaties

Accessoires

Productondersteuning

Veelgestelde vragen (FAQ)

Voor uw aanschaf

You can use a video capture device to capture or record an audio and video output signal to a connected computer.  You can use USB, ExpressCard, or PCI Express technology to connect a video capture device to a computer system.  StarTech.com has video capture devices that can capture audio and video from sources such as HDMI, DVI, VGA, S-Video, component, or composite.  The captured signals are usually recorded with software that is included with the video capture device.  Some software will also stream the captured signals online.

Select a capture device that features the audio and video connections you want to use.  These can be identified on the product page, under the Technical Specifications tab.  Whenever possible, you should avoid using adapters or converters with video capture devices as they can cause issues or negatively impact the quality of the audio or video signals being captured.

When looking at a video capture device that requires software to use, it is important to consider the operating system you want to use it on.  You can find this on the product page under the Technical Specifications tab, which only lists supported operating systems.

Consider what resolution and refresh rate you require.  You can find the supported resolutions and refresh rates on the product page, under the Technical Specifications tab in the Performance section. 

Video capture device usually use drivers and software to record audio and video.  Both the drivers and the software can be found on the product page under the Support tab.  Different software will have different features so it’s a good idea to review the software to make sure it is a good fit for your intended usage.  You can do so by looking at the manual for the device, also located on the Support tab.  StarTech.com only supports the software included with the video capture device. 

HDCP stands for High-Bandwidth Digital Content Protection.  This system protects high definition video from being intercepted, modified, or recorded between the source and the display.  All StarTech.com devices adhere to the HDCP standard, so they do not record HDCP-protected content.  HDCP content that is being blocked often appears as a blank screen or a screen with an HDCP error shown on it.

Certain video capture devices allow you to stream video feeds online with streaming platform such as YouTube.  For more information, review the product manual or watch our video on this subject.  You can find a link to the video in the description.  If at this point you have further questions about a Startech.com video capture device contact our technical support team for further assistance. 

Although you may be able to plug in all of the connectors used for video standards associated with video capture cards/cables, you may still encounter issues that may prevent the video from being captured correctly.

About copyright protection

Some video sources implement copyright protection when you are plugging into a non-display device. Examples of copyright protection include the following:

  • High Definition Content Protection (HDCP). This type of copyright protection is included with DVI and HDMI® and can appear as a video error or blank screen. HDCP may also appear on the screen.

  • Analogue Content Protection (ACP). This type of copyright protection is included with analogue video (for example, composite, s-video, or component). ACP can appear as a brightness pulsing up and down.

Copyright protection cannot legally be bypassed, and StarTech.com does not offer any products that do so.

Using video adapters

It is possible to passively convert video signals to different connector types, but the video standards will not always match between the video source and video destination. You may need to actively convert from one video type to another to ensure that the correct conversion is being made. When a passive converter is not available, most video standards can be converted with active converters.

Examples of incompatible passive conversions include the following:

  • VGA source to composite or component (RCA) video, or composite or component (RCA) video to VGA.
  • Composite (RCA) source to s-video.
  • VGA to DVI-D and DVI-D to VGA.

Note: S-video to composite can be passively converted. DVI-I/DVI-A and VGA can be used bidirectionally.

About output resolution

If your video source has the ability to change resolutions (for example, a computer), it may be possible to send an incompatible resolution. To verify that the correct resolution is being used, navigate to www.StarTech.com and click the Technical Specifications tab for your product. Make note of the Industry Standards and Maximum Resolution specifications.

In the operating system's display management, you can adjust your video source to match or go below the maximum resolution and if possible, the refresh rate of your capture card.

Due to High-bandwidth Digital Content Protection (HDCP), it is not possible to record from certain gaming consoles. HDCP content (for example, movies) are protected, but the console itself may or may not have permanent HDCP enabled on the HDMI output.

For more information about consoles and their permanent HDCP enforcement, consult the following table:

Console Permanent HDCP

PlayStation 3

Yes
PlayStation 4

Optional. You can change the settings in the menu.

Wii U

No

XBox 360

No
XBox One No

You can use a video capture card with consoles that do not have permanent HDCP enabled.

Certain StarTech.com video capture cards are compatible with DirectShow and will work with many third-party video capture applications that are compatible with DirectShow. For more information on DirectShow compatible video capture cards, refer to the following FAQ: https://www.startech.com/faq/video-capture-cards-directshow.

Although third-party software might work with this video capture card, StarTech.com does not officially support or endorse the use of third-party applications.

No, you cannot use this capture card to turn your video camcorder into a webcam. This capture card does not use a DirectShow compatible driver, which is a requirement for many of the software applications that enable you to use your video camcorder as a webcam. 

For a list of video capture cards that you can use to turn a video camcorder into a webcam, refer to the following FAQ: https://www.startech.com/faq/video-capture-cards-webcam-capable.

This video capture card cannot record from more than one input at the same time.  

Note: Although the USB2HDCAPS can be connected to multiple computers on the same network, only one device can capture video at a time.

 

Installatie

Note: If you have a USB or ExpressCard capture device, do not physically connect the device to your computer until you are instructed to (Step 5).

Prior to installing this device, make sure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. In the list of extracted files, right-click Setup.exe and select Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Please extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. After Windows has restarted, connect the capture device to your computer if you have a USB or ExpressCard capture device.
  3. Your computer will automatically complete the driver installation and your device should be ready to use.

Note: Installation may take several seconds to complete. During the installation your display might flicker; this is normal. Once the installation has completed you will see your Windows desktop extended to the additional monitor.

Hoe gaat u te werk

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

  1. Open a web browser and navigate to https://www.youtube.com/live_dashboard.
  2. Under Encoder setup, copy the Server URL from the bottom of the page.
  3. Add a slash mark and your stream name or key to the end of the URL (for example, rtmp://a.rtmp.youtube.com/live2/USERACCOUNT-8033.d1fj-m8d7-ds8y-41qj).
  4. Copy the RMTP link (you will need it to complete step 8).
  5. Open Stream Catcher.
  6. Click Settings Streaming Settings.
  7. In the Streaming Protocol Type drop-down menu, click RTMP.
  8. In the Streaming Public URL field, paste the link that you copied in step 4.
  9. On the Stream Catcher home page, click the blue record icon.

Troubleshooting

When you troubleshoot issues with a video capture device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video source

  • Video capture device

To test your setup components, try the following:

  • Use the video cables, source, and capture device in another setup to see if the problem is with the components or the setup.

  • Use a different video cable, source, and capture device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video cables and source with the video capture device, make sure that the following is true:

  • Other video destinations work with the same video source. For more information, visit http://www.startech.com/faq/video_capture_cards_source_compatibility.

  • Adapters and extenders are kept to a minimum.

  • The video source is not copyright protected (for example, HDCP).

  • The video standard (for example, NTSC, PAL, HDMI, and so on) of the video source matches the Technical Specifications of the video capture device.

To check if the video capture device is detected in Windows®, complete the following:

  1. Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your device is listed under Sound, video and game controllers.

  2. Do one of the following:

When you test the video capture device on your computer, make sure that the driver and capture software is installed on your system for your adapter. Some cards may be able to support third party software, however, support is limited. For more information, visit https://www.startech.com/faq/video-capture-cards-third-party-software.

Note: The USB3HDCAP requires a compatible USB 3.0 card.

Before you begin to troubleshoot StreamCatcher, make sure that you have tried to troubleshoot the video capture device by referring to the following FAQ: www.startech.com/faq/video_capture_cards_general_troubleshooting.

If you are unable to display or record video, complete the following in Device Settings:

  • Make sure that the input that you are trying to record or display is selected in Video Source.

  • Make sure that the video standard is set correctly for your region (for example, NTSC for North America, PAL for Europe, and so on).

  • If your audio is not working, make sure that you selected the correct audio source in Audio Source.

If the recorded video is poor quality, navigate to Record Settings and change the following settings to best suit your setup:

  • Record Resolution

    • High
    • Low
  • Record Mode

    • VBR (Variable Bit Rate) adjusts the bit rate based on the complexity of the video and saves space.
    • CBR (Constant Bit Rate) maintains the same bit rate regardless of complexity and offers the best recording quality.
  • Record Quality

    • The VBR quality level increases from 1 to 10, with 10 being the highest quality level.
    • The CBR quality level goes from 2 Mbps to 16 Mbps, with 16 Mbps being the highest quality level. 

If you are experiencing any issues with streaming, make sure that the following is true:

  • The target IP address is correct.

  • The correct protocol is selected.

  • You tested a low resolution and low bit rate to get the best performance.