StarTech.com

DisplayPort naar HDMI actieve video- en audio adapter / converter - DP naar HDMI - 1920x1200

Sluit een HDMI®-monitor aan op een DisplayPort®-videobron

Productcode: DP2HDS

  • Ondersteuning van resoluties tot 1920x1200
  • Ondersteund op elk HDMI®-beeldscherm inclusief tv's en Apple Cinema Display HD
  • Vergrendelbare DisplayPort-connector
Bekijk meer
  • Voldoet aan de DisplayPort 1.1a-specificaties
  • Ondersteunt HDCP 1.3
  • Werkt met videokaarten die geen DP++ (multi-mode)-signalen kunnen uitgeven
  • 5.1 Surround Sound audiodoorvoer
€ 40,99 EUR exc BTW
€ 49,60 EUR inc BTW
Niet beschikbaar
Eventueel op voorraad bij partners
Waar te verkrijgen
Van een partner

Bezoek vandaag nog onze Europese online winkel voor meer producten zoals deze!

Overzicht

De DP2HDS adapter zet DisplayPort om naar HDMI met audio doorvoer ondersteuning, waardoor u een desktop- of laptopcomputer uitgerust met een DisplayPort A/V-uitgang kunt aansluiten op een HDMI®-monitor, -projector of -beeldscherm.

In tegenstelling tot een passieve adapter zet de DP2HDS actief single mode en dual mode DisplayPort-uitgangssignalen om, wat ideaal is voor grafische kaarten die geen dual mode/multi-mode (DP++) signalen verzenden, zoals ATI™ Eyefinity-kaarten.

Gedekt door 2 jaar garantie van StarTech.com en gratis levenslange technische ondersteuning.

StarTech.com Voordeel

  • Ondersteunt zowel multimode (DP++) als single-mode DisplayPort-uitgangssignalen, via actieve DisplayPort®-conversie

Toepassingen

Voor gebruik met grafische kaarten die geen DP++ (multi-mode)-signalen kunnen uitgeven

Gebruik een bestaande HDMI®-monitor nu met een nieuwe DisplayPort®-computer of andere videobron

Ideaal voor het gebruik van uw HDMI®-monitor als secundair beeldscherm

Ideaal voor digitale amusementscentra, kantoren aan huis, vergaderzalen en beurzen

Technische specificaties

Garantie
Garantie 2 Years
Hardware
Active or Passive Adapter Actief
Adapterstijl Adapters
Audio Ja
Convertertype Formaatomzetting
Industriestandaarden HDCP
DisplayPort 1.1a
Uitgangssignaal HDMI
Prestaties
Audiospecificaties 5.1 Surround-geluid
Maximale digitale resoluties 1920x1200
Ondersteuning breedbeeld: Ja
Connector(en)
Connector A 1 - DisplayPort (20-polig) Vergrendelbaar Mannelijk
Connector B 1 - HDMI (19-polig) Vrouwelijk
Gebruiksomgeving
Bedrijfstemperatuur 0°C to 60°C (32°F to 140°F)
Opslagtemperatuur 0°C to 70°C (32°F to 158°F)
Vochtigheid 40% - 85% rel. luchtvochtigheid
Fysieke eigenschappen
Breedte product 45 mm [1.8 in]
Gewicht product 35 g [1.2 oz]
Hoogte product 15 mm [0.6 in]
Kleur Zwart
Lengte product 210 mm [8.3 in]
Verpakkingsinformatie
Verzendgewicht (verpakt) 45 g [1.6 oz]
Wat wordt er meegeleverd
Meegeleverd 1 - DisplayPort® naar HDMI® Actieve Adapter

Certificaties

Verwante producten

Mini DisplayPort naar DVI Actieve Adapter
MDP2DVIS
Mini DisplayPort naar DVI Actieve Adapter

Sluit een DVI-monitor aan op een computer met single-mode DisplayPort-uitgang

€ 40,99 exc BTW
€ 49,60 inc BTW
DisplayPort naar VGA Video Adapter Converter
DP2VGA
DisplayPort naar VGA Video Adapter Converter

Sluit uw VGA-monitor aan op een computer met DisplayPort

€ 41,99 exc BTW
€ 50,81 inc BTW

Accessoires

Productondersteuning

Veelgestelde vragen (FAQ)

Voor uw aanschaf

Unfortunately no, this device has an intended source and an intended destination.  Refer to the title of the webpage for this order.

When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.

If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.

Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.

Passive Adapters

Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.

Active Adapters

Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.

If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.

Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters.  For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Surface Dock

If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).

Note: This issue does not apply to the Surface Pro 3 Docking Station.

Installatie

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Troubleshooting

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

If a DisplayPort converter with audio is not passing sound from the source to the destination, complete the following:

  1. Make sure that the DisplayPort connection on the video card is the default audio playback device.
  2. Make sure that the video card has the DisplayPort audio codec installed. If not, visit the video card manufacturer's website to find out how to update the video card driver.