StarTech.com

HDMI via Cat5 Video Verlenger met Audio - RS232 en Infrarood

Verleng een HDMI®-bron met audio, RS232 en infrarood via Cat5-bekabeling

Productcode: ST121UTPHDEU

  • Maximale afstand van 80m met Cat5(of betere)-kabel
  • Verlengt HDMI- of DVI-video met stuursignaal over een enkele Cat5/5e/6/6a/7 UTP/STP-kabel
  • Ondersteunt bidirectionele RS232- en IR-communicatie
Bekijk meer
  • Ondersteuning van resoluties tot 1080p / 60Hz / 48 bit
  • RS232-interface ondersteunt full-duplex overdrachtsnelheden tot 115200 bit/s
  • Geen software of drivers nodig
  • Audiotransmissie ondersteunt Dolby TrueHD, DTS-HD MA
  • Voldoet aan high-speed HDMI and HDCP
€ 600,92 EUR exc BTW
€ 727,11 EUR inc BTW
Niet beschikbaar
Eventueel op voorraad bij partners
Waar te verkrijgen

Bezoek vandaag nog onze Europese online winkel voor meer producten zoals deze!

Overzicht

Met de ST121UTPHDEU HDMI Audio Video Verlenger via Cat5 met RS232 en Afstandsbediening kunt u een HDMI(of DVI)-bronsignaal tot 80 meter verlengen via een standaard Cat5 of betere UTP/STP-kabel, wat u de vrijheid geeft de plaatsing van uw beeldscherm te optimaliseren zonder verlies van beeldkwaliteit. De ondersteuning voor high-speed HDMI en HDCP zorgt ervoor dat zelfs de nieuwste apparaten een signaal met resolutie van 1080p en de bijbehorende digitale audio kunnen doorgeven. Deze HDMI audio/video-verlenger beschikt ook over een bidirectionele RS232 seriële en infraroodinterface zodat u uw mediabron kunt bedienen vanaf beide uiteinden van de verbinding. Deze HDMI-verlenger met RS232 en IR bestaat uit een zender en ontvanger en is een complete, voordelige oplossing voor narrowcasting, beurspresentaties of videoconferencing. Met 2-jaar garantie en gratis levenslange technische ondersteuning door StarTech.com.

StarTech.com Voordeel

  • Verlenging via Cat5 stelt u in staat gebruik te maken van bestaande infrastructuur met Cat5-bekabeling of beter
  • Geïntegreerde bidirectionele RS232 en infraroodinterfaces zorgen ervoor dat u uw bronapparaat kunt bedienen en bewaken vanaf beide uiteinden van de verbinding.
  • Ondersteuning voor volledige 1080p-resolutie met bijbehorende digitale audio zodat de inhoud kan worden bekeken en beluisterd zoals dit bedoeld was

Toepassingen

Ideaal voor narrowcasting-toepassingen in het onderwijs, de gezondheidszorg en de financiële en zakelijke sector

Ideaal voor videoconferencing bij vergaderingen en in kantoren

Plaats de weergaveapparatuur op een passende locatie, terwijl het systeem zelf in een schone en veilige omgeving wordt geplaatst

Kies een optimale locatie voor uw presentatie op beurzen en in conferentiezalen

Zend videobeelden en seriële data naar een projector en bedien deze vanaf uw bureau

Verleng uw beeldscherm in ruwe industriële locaties

Technische specificaties

Garantie
Garantie 2 Years
Hardware
Audio Ja
Bekabeling Cat5 UTP of beter
Industriestandaarden Voldoet aan High-Speed HDMI en HDCP
Op elkaar aansluitbaar Nee
Poorten 1
Prestaties
Algemene specificaties Bidirectioneel
38Khz / ±10° / 5M
Audiospecificaties Ondersteunt Dolby TrueHD, DTS-HD MA
Max. afstand 80 m / 260 ft
Maximale digitale resoluties 1080p @ 60Hz, 48-bit
Maximale overdrachtsnelheid HDMI - 3,4 Gbt/s
RS232 - 115200 bps baud
Ondersteuning breedbeeld: Ja
Connector(en)
Aansluitingen externe eenheid 1 - DB-9 (9-polig, D-Sub) Mannelijk
1 - HDMI (19-polig) Vrouwelijk
1 - RJ-45 Vrouwelijk
Connectoren lokale eenheid 1 - DB-9 (9-polig, D-Sub) Vrouwelijk
1 - HDMI (19-polig) Vrouwelijk
1 - RJ-45 Vrouwelijk
Software
Besturingssystemen OS Independent
Indicatoren
LED-indicatoren 1 - Infrarood ontvangen (blauw)
1 - Infrarood zenden (rood)
1 - Power (continu groen wanneer aan)
1 - RJ45-verbinding (continu groen wanneer verbonden)
Voeding
Inclusief voedingsadapter Inclusief 2 wisselstroomadapters
Ingangsspanning 230 AC
Uitgangsspanning 5 DC
Uitgangsstroom 2A
Vermogensopname 1200mA (max)
Gebruiksomgeving
Bedrijfstemperatuur 0°C to 55°C (32°F to 131°F)
Opslagtemperatuur -20°C to 85°C (-4°F to 185°F)
Vochtigheid 0-95%
Fysieke eigenschappen
Breedte product 88 mm [3.5 in]
Gewicht product 1000 g [35.3 oz]
Hoogte product 30 mm [1.2 in]
Kleur Zwart
Lengte product 130 mm [5.1 in]
Type behuizing Staal
Verpakkingsinformatie
Verzendgewicht (verpakt) 1.1 kg [2.4 lb]
Wat wordt er meegeleverd
Meegeleverd 1 - Zender
1 - Ontvanger
2 - IR-ontvangerkabel
2 - IR-zenderkabel
2 - Voedingsadapter
1 - Handleiding

Compatibiliteit

Bekijk volledige OS compatibiliteit
OS Independent

Certificaties

Verwante producten

VGA over Cat5 Digital Signage Receiver for DS128 with RS232 & Audio
DSRXL
VGA over Cat5 Digital Signage Receiver for DS128 with RS232 & Audio

Voor het verlengen en centraal bedienen van VGA-video, audio en RS232-besturingssignalen naar meerdere beeldschermen

€ 375,99 exc BTW
€ 454,95 inc BTW
VGA Video Verlenger via Cat5 Point-to-Point (UTPE Serie)
ST121UTPEP
VGA Video Verlenger via Cat5 Point-to-Point (UTPE Serie)

Verleng een VGA-signaal naar een extern beeldscherm met behulp van Cat5-bekabeling

€ 195,99 exc BTW
€ 237,15 inc BTW

Accessoires

Productondersteuning

Veelgestelde vragen (FAQ)

Voor uw aanschaf

You should only use video converters and extenders if it is absolutely necessary to do so. In many cases, most video converters and extenders are not necessary if you purchase the correct cable.

The following table lists the maximum length of cable for common video standards.

Video standard Maximum length
DisplayPort 50 ft. (15.2m)
HDMI 50 ft. (15.2m)
DVI 50 ft. (15.2m)
VGA 200 ft. (71m)

Note: StarTech.com offers cables longer than what is listed above, including active cables, which typically include built-in active signal boosters that allow for longer cables. Active cables are specifically designed to exceed the suggested maximum lengths and are tested at the listed specifications (for example, the maximum listed resolution).

Video adapters

Video adapters passively adapt a cable from one connector type to another. Video adapters do not change the signal type, or change the video standard.

Examples of common applications for adapters include the following:

  • DVI-I to VGA

  • RCA to BNC

  • Mini DisplayPort to DisplayPort

  • Couplers (female to female, or male to male)

Note: You can use a coupler to extend a cable for a short distance. However, each coupler that you use can introduce signal loss, which degrades the signal quality.

Video converters

Video converters actively process and change the signal type from one video standard and convert it to another standard. They are typically used to convert digital to analog and vice versa, but can be used to convert a digital signal to another digital video standard (for example, HDMI to DisplayPort).

Video converters work over short distances from the source to the destination: up to 15 feet or 3 meters.

Video extenders

Video extenders convert an input signal to a higher voltage for transmission over longer distances and then convert the input signal back to the original video standard. The input and the output signal will match on a video extender, as the same video standard is maintained end-to-end. If a cable is extended with adapters or converters, the signal quality degrades.

Note: For more information on using a video adapter or converter with a video extender, see the following FAQ: http://www.startech.com/faq/video_signal_converters_convert_then_extend.

If you need to use a video extender with a video adapter or converter, you should position the adapter or converter as close to the video source as possible. For example, if you need to take a VGA signal from a computer and send it 200 feet to an HDMI® projector, you should convert the signal from VGA to HDMI and use an HDMI extender.

Note: For more information on when to use cables or extenders, see the following FAQ: http://www.startech.com/faq/video_signal_converters_when_to_convert.

Yes, this video extender works with set-top boxes, provided the set-top box meets the following requirements:

  • The set-top box must be High-bandwidth Digital Content Protection (HDCP) compliant.
  • The set-top box must support devices being connected between the video source and display. If the set-top box requires a direct cable connection between the video source and display, it won't work with this video extender.

No, this device is designed to be a point-to-point solution using networking cabling only. 

This device outputs HDMI video signals. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.

HDCP

When you consider whether to convert an HDMI video signal to another connection type, it is important to know if the media that is being converted from the HDMI video connection is protected by High-bandwidth Digital Content Protection (HDCP). If the media is protected by HDCP, you cannot convert to analog video connections because they do not support HDCP. You may experience this issue when you use devices like Blu-ray players, DVD players, and certain gaming consoles.

Target connection Conversion
VGA HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA.
DVI

HDMI to DVI: https://www.startech.com/Cables/Audio-Video/HDMI/HDMI-to-DVI/.

DisplayPort HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.

 

This device has an HDMI input port.  If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.

Source Connection

Conversion

VGA

VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.

DVI

DVI to HDMI video converters: https://www.startech.com/Cables/Audio-Video/Video-Adapter/HDMI-Cable-Adapters/.

DVI to HDMI video cables: https://www.startech.com/Cables/Audio-Video/HDMI/HDMI-to-DVI/.

DisplayPort

DisplayPort to HDMI passive converters: https://www.startech.com/AV/Displayport-Converters/DP-HDMI/?filter_CONVERTTYPE=Passive.

DisplayPort to HDMI active converters: https://www.startech.com/AV/Displayport-Converters/DP-HDMI/?filter_CONVERTTYPE=Active.

DisplayPort Passive and Active Conversions

The converter that you require depends on the type of DisplayPort video source that you are using. For more information about converting DisplayPort video signals, refer to the following FAQ: https://www.startech.com/faq/DisplayPort_Converter_DP_Multi_Mode.

Installatie

There are a few things you'll want to take care of before you deploy your new video extender in your setup.

It’s important to make sure you have everything you will need ahead of time. These items are listed below.

  • Transmitter
  • Receiver
  • Video source
  • Display
  • Video cables
  • (Optional) Ethernet or fiber cables
  • (Optional) Power adapter(s)

It’s also important to test everything in a simplified setup ahead of time to make sure everything works and that you understand how it works. 

In order to set up your video extender, complete the following:

  1. Position your video transmitter near your video source.
  2. Connect the video output from your video source to the video transmitter.
  3. (Optional) Connect the power adapter to the video transmitter.

Note: Not all video extenders require external power, or require external power on both ends.  Refer to the manual for more information.

  1. Position your video receiver near your display.
  2. Connect the video output from your video receiver to your display.
  3. (Optional) Connect the power adapter to the video receiver.
  4. If using a wired video extender, connect your network cabling between the video transmitter and the video receiver.
  5. (Optional) If you are extending anything else supported by your video extender connect those devices to the transmitter and receiver.
  6. (Optional) If you are using a wireless extender, there may be a sync button you need to press to pair the transmitter and receiver.

Now that you have set up your video extender, you can check that everything is working.  You should be able to see your video source's output on the display connected to the video receiver.

If at this point you have further questions regarding a Startech.com video extender, contact our technical support team for further assistance. 

To get the highest quality signal from your source to your display when you use an HDMI extender, do the following:

  • Make sure that the HDMI versions of the source, extender, and destination are compatible. For example, if you require 3D support, make sure that all of the devices can support 3D over HDMI.

  • Use the least amount of adapters, splitters, or converters as possible. Each device that you use in your setup creates additional points of potential failure and creates more steps for an HDCP key to hop through, which may cause issues with older displays. For more information on HDCP, refer to the following FAQ: http://www.startech.com/faq/video_signal_converters_HDCP.

  • Use an HDMI extender that exceeds the requirements of the setup. For example, if you need to extend the signal 200 feet, it is best to use an extender capable of more than 200 feet.

  • Make sure that all of the CAT 5/6 runs are as straight as possible, with the least amount of coiling.

  • Make sure that all of the patches, wall jacks, and cables use the highest possible CAT specification, (for example, CAT 6), and were tested to conform to the standard.

  • Use patches, wall jacks, and cables with the same pin configuration. For more information on T568A versus T568B wiring, refer to the following FAQ: http://www.startech.com/faq/network_cables_a_vs_b_pinout.

  • Keep the cabling away from sources of high noise.

  • Make sure that you use adequate electrical grounding in your setup.