StarTech.com

1-poort PCI Express 10/100 Ethernet Netwerkkaart Adapter

Voeg een 10/100 Mbit/s Ethernetpoort toe aan een desktopcomputer via een PCI Express-slot

Productcode: PEX100S

  • Enkele 10/100 Mbit/s RJ45 Ethernet-poort
  • Voldoet aan de IEEE802.3 CSMA/CD, 802.3 10Base-T en 100Base-TX specificaties
  • Crossover-detectie en automatische aanpassing (Auto MDI/MDI-X)
Bekijk meer
  • Full en half duplex-ondersteuning
  • Automatische configuratie van overdrachtsnelheid en duplex-modus
  • LED-indicatoren voor netwerkverbinding / -verkeer en 10/100 Mbit/s
  • Ondersteuning voor Wake-on-LAN
  • Inclusief standard en low-profile montagebrackets
€ 22,99 EUR exc BTW
€ 27,82 EUR inc BTW

Overzicht

Met deze PCI Express 10/100 Ethernet-kaart kunt u op eenvoudige wijze een server of werkstation aansluiten op een 10/100 Ethernet-netwerk via PCI-E. De kaart beschikt over talrijke eigenschappen en functies, waaronder full / half duplex-functionaliteit en Wake-on-LAN (WOL) energiebeheer.

De PEX100S Ethernet-kaart wordt geleverd met standaard en low-profile brackets, is compatibel met de meeste mATX- (slimline) en ATX-systeembehuizingen en beschikt over automatische MDI/MDIX-configuratie voor een eenvoudige installatie en configuratie.

StarTech.com Voordeel

  • Kosteneffectieve en eenvoudige Ethernet-netwerkconnectiviteit voor desktopcomputersystemen
  • Met levenslange garantie en gratis technische ondersteuning door StarTech.com

Toepassingen

Vervanging voor de Ethernet-kaart in een desktopcomputer thuis of op kantoor

Voeg Ethernet-netwerkconnectiviteit toe voor breedband-internettoegang op een oudere desktopcomputer

Voeg een tweede of reserve-netwerkaansluiting toe aan een werkstation of server

Technische specificaties

Garantie
Garantie Lifetime
Hardware
Bus type PCI Express
Chipsetcode Realtek - RTL8101E
Interface RJ45 (10/100 Ethernet)
Kaarttype Standaard bracket (incl. low profile bracket)
Poorten 1
Prestaties
Compatibele netwerken 10/100 Mbps
Maximale overdrachtsnelheid 100 Mbit/s
Connector(en)
Externe poorten 1 - RJ-45 Vrouwelijk
Type connector(en) 1 - PCI Express x1 Mannelijk
Software
Besturingssystemen Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016
Linux 2.6.x to 4.11.x LTS Versions Only
Indicatoren
LED-indicatoren 1 - Verbindingsstatus
Fysieke eigenschappen
Breedte product 120 mm [4.7 in]
Gewicht product 45 g [1.6 oz]
Hoogte product 21 mm [0.8 in]
Lengte product 92.5 mm [3.6 in]
Verpakkingsinformatie
Verzendgewicht (verpakt) 0.1 kg [0.3 lb]
Wat wordt er meegeleverd
Meegeleverd 1 - 10/100 PCI Express Ethernet Kaart
1 - Low-profile bracket
1 - Driver-CD
1 - Handleiding

Compatibiliteit

Bekijk volledige OS compatibiliteit
Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016
Linux 2.6.x to 4.11.x LTS Versions Only

Certificaties

Verwante producten

1-poort PCI 10/100 Mbit/s Ethernet Netwerkkaart Adapter
ST100S
1-poort PCI 10/100 Mbit/s Ethernet Netwerkkaart Adapter

Voeg een 10/100 Mbit/s Ethernetpoort toe aan een desktopcomputer via een PCI-slot

€ 10,99 exc BTW
€ 13,30 inc BTW
1-poort Low Profile PCI 10/100 Mbit/s Ethernet Netwerk-adapterkaart
ST100SLP
1-poort Low Profile PCI 10/100 Mbit/s Ethernet Netwerk-adapterkaart

Voeg een 10/100 Mbit/s Ethernet-poort toe aan een low profile pc via een PCI-slot

€ 12,99 exc BTW
€ 15,72 inc BTW

Accessoires

Productondersteuning

Veelgestelde vragen (FAQ)

Installatie

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Right-click Setup.exe. 
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Your computer will automatically complete the driver installation and your device should be ready to use.

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Double-click Setup.exe.
  4. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  5. Your computer will automatically complete the driver installation and your device should be ready to use.

Hoe gaat u te werk

StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met:

  1. The BIOS must support PXE.
  2. The BIOS must see the card.
  3. The environment must have drivers for the chipset used in the card.
  4. If using a USB networking card, the environment must have support for USB devices as well.

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Troubleshooting

When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Ethernet cables
  • Network devices
  • Computer system

To test your setup components, try the following:

  • Use the Ethernet cables, network devices, and computer system in another setup to see if the problem is with the components or the setup.
  • Use different Ethernet cables, network devices, and a different computer system in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.
  • Use short cables when you are testing.

When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:

Sometimes an on-board network interface card (NIC) conflicts with a new NIC.  In these cases it is best to disable the on-board NIC.

The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible.  To do this, consult your motherboard manual.

You can also disable any NIC in Windows.  Here is how you do this:

First click Start, or, in Windows 10 and 8, hold down the Windows key and press X.  Then click Control Panel.

Windows 10

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows 8

  1. Click Network and Sharing Center.
  2. On the left, click Change adapter settings.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows 7

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows Vista

  1. Click Network and Sharing Center.
  2. On the left, click Manage network connections.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows XP

  1. Click Network Connections.
  2. Right-click the NIC that you would like to disable and select Disable.

If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings.  You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.

Note: You must log in as the local administrator before you continue.

To open Device Manager:

  • Press Windows key + R.
  • Type devmgmt.msc.
  • Click OK.
  1. Open the Networking adapters section.
  2. Right-click the network adapter that you want to change and select Properties.
  3. Click the Advanced tab.
  4. Scroll down to Speed & Duplex. By default, it is set to Auto-Negotiate. Select any of the speeds that you see in the list.
  5. Click OK and restart your computer.